• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.731-736
• /
• 2017

Friction Pendulum isolators are tools developed in the past few decades. The simplest form of these isolators, are FPS whose main disadvantages are having a constant frequency independent of the frequency of the structure. For this reason, researchers have invented VFPI isolator whose frequency is variable and depends on displacement. Another friction pendulum isolator is DCFP isolator which is a combination of two FPS isolators. In this article, first by changing the geometry of DCFP isolator plates from spherical to elliptical, the motion and frequency equations of DVFPI isolators are defined, and then the seismic behavior of DVFPI isolators are analyzed in various geometric and plate friction settings using motion equations, and confirmed using ABAQUS software. The most important results of this study are that the hysteresis behavior of DVFPI isolators are severely nonlinear, its curve follows two distinct curvatures, and that the restoring force is faced with softening mechanism that limits the seismic force transmitted to the structure, whereas the restoring force in DCFP isolators increases linearly with increasing displacement.

• 대한수의학회지
• /
• 제43권4호
• /
• pp.703-708
• /
• 2003

This study was carried out to compare the efficacy of carboxymethyl chitosan fabric (CMCF) with that of the combination of low molecular weight heparin (LMWH) and CMCF for the prevention of postoperative adhesions in the rat. Adhesions were induced by suturing both the ileal serosa and peritoneum scraped until petechial bleeding occurred. CMCF were sutured between two surfaces, and LMWH were instilled intraperitoneally immediately before closure of the peritoneomuscular layer. The adhesions were blindly assessed 2 weeks later by using a tensiometer. The mean tensile strength(Newton) of formed adhesions was $2.59{\pm}0.85$ in control group, $2.10{\pm}0.75$ in the CMCF group and $1.53{\pm}0.44$ in the CMCF+LMWH group. The most favorable prevention against adhesion was achieved in the CMCF+LMWH group. Therefore, we could conclude that CMCF+LMWH were effective in prevention against postoperative adhesion in the rat.

• Carbon letters
• /
• 제16권2호
• /
• pp.67-77
• /
• 2015

Carbon fibers (CFs) have a unique combination of properties which allow them to be widely used as reinforcing materials in advanced polymer composites. The mechanical properties of CF-reinforced polymer composites are governed mainly by the quality of interfacial adhesion between the CFs and the polymer matrix. Surface treatments of CFs are generally carried out to introduce chemical functional groups on the fiber surfaces, which provide the ability to control the surface characteristics of CFs. In this study, we review recent experimental studies concerning various surface treatment methods for CFs. In addition, direct examples of the preparation and properties of CF-reinforced thermosetting composites are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.537-541
• /
• 2003

In order to control the missiles by aerodynamics, control surfaces sometime called fins are used. Deflection angles of these fins are the right control variables of the aerodynamics, but aerodynamicists prefer to use analytic variables called aileron, elevator and rudder instead of these physical variables, because these three analytic variables dominantly influence on the roll, pitch and yaw channels of the missile maneuver, respectively, and each can be assumed a linear combination of four fin deflection angles. On that basis, roll, pitch and yaw autopilots for controlling the attitudes or lateral acceleration of the missile are designed, and as a consequence outputs of each autopilot are aileron, elevator and rudder commands, respectively. In the existing fin control scheme for the typical tail-fin controlled cruciform missiles, firstly these outputs are distributed to four fin defection commands, and after that four fins are actuated by fin controllers so that their deflections follow the commands. This paper shows that performance of such control schemes can be degraded significantly when fin actuators have certain physical constraints such as slew rate, voltage or current limit, uncertainty of actuator dynamics, and so on, and propose a new control scheme which alleviates such problems. This scheme can be widely applied to various fin actuation systems. But in this paper, for convenience, tail-fin controlled cruciform missile is taken as an example, and it is shown that a proposed control scheme gives better performance than the existing one.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권6호
• /
• pp.454-464
• /
• 2021

Objectives: This study aimed to investigate the in vitro osteoinductivity of the combination of bone morphogenetic protein-2 (BMP-2) and nanohydroxyapatite (nHAp) and the in vivo effects of implants coated with nHAp/BMP-2. Materials and Methods: To evaluate the in vitro efficacy of nHAp/BMP-2 on bone formation, bone marrow-derived mesenchymal stem cells (BM-MSCs) were seeded onto titanium disks coated with collagen (Col), Col/nHAp, or Col/nHAp/BMP-2. Protein levels were determined by a biochemical assay and reverse transcriptase-polymerase chain reaction. Stem cell differentiation was analyzed by flow cytometry. For in vivo studies with mice, Col, Col/nHAp, and Col/nHAp/BMP-2 were injected in subcutaneous pockets. Titanium implants or implants coated with Col/nHAp/BMP-2 were placed bilaterally on rabbit tibias and evaluated for 4 weeks. Results: In the in vitro study, BM-MSCs on Col/nHAp/BMP-2 showed reduced levels of CD73, CD90, and CD105 and increased levels of glycosaminoglycan, osteopontin, and alkaline phosphatase activity. After 4 weeks, the Col/nHAp/BMP-2 implant showed greater bone formation than the control (P=0.07), while no differences were observed in bone implant contact and removal torque. Conclusion: These results suggest that a combination of BMP-2 and an nHAp carrier would activate osseointegration on dental implant surfaces.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.86-91
• /
• 2016

End milling is an important and common machining operation because of its versatility and capability to produce various profiles and curved surfaces. This paper presents an experimental study of the cutting force variations in the end milling of SM25C with HSS(high speed steel) and carbide tool. This paper involves a study of the Taguchi design application to optimize cutting force in a end milling operation. The Taguchi design is an efficient and effective experimental method in which a response variable can be optimized, given various control and noise factors, using fewer resources than a factorial design. This study included feed rate, spindle speed and depth of cut as control factors, and the noise factors were different cutting tool in the same specification. An orthogonal array of $L_9(3^3)$ of ANOVA analyses were carried out to identify the significant factors affecting cutting force, and the optimal cutting combination was determined by seeking the best cutting force and signal-to-noise ratio. Finally, confirmation tests verified that the Taguchi design was successful in optimizing end milling parameters for cutting force.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.219-226
• /
• 2019

This paper describes the development of a 500W DC/DC converter for use with a thermoelectric module(TEM). A thermoelectric device is a structure in which a P-type semiconductor and an N-type semiconductor are electrically connected in series and thermally connected in parallel. There is a feature that an electromotive force is generated by making a temperature difference between both surfaces of a thermoelectric element. This feature can be used as a renewable power source without the need for fossil energy. The proposed converter boosts the low generation voltage of the thermoelectric element to secure the voltage for the grid connection. This converter is a combination of a resonant converter for boosting and a boost-converter for output voltage control. This structure has an advantage that a voltage can be stepped up at a high efficiency and precise output voltage control is possible. We carry out simulations and experiments to verify the validity.

• 한국산업정보학회논문지
• /
• 제12권1호
• /
• pp.46-53
• /
• 2007

3축 CNC 공작기계상에서 자유형상의 벽을 가진 자유곡면을 가공할 때 최종 NC (Numerical Control) 코드를 만들기 위한 공구 경로는 효율적으로 결정 되어져야 한다. 단일화된 황삭과 정삭 알고리즘 및 공구경로가 이미 그래픽으로 Part 1에서 시뮬레이션 되었다. 본 연구에서는 Part 1에서 보여진 시뮬레이션 결과를 3축 CNC 공작기계를 이용하여 자유곡면 바닥을 가진 일반적인 파켓 밀링을 위한 직선 보간 및 직선+아크를 혼합한 보간을 위한 NC 공구경로 데이터로 만들어서 3D 격자 항행 알고리즘을 실험하였고 그 효용성을 증명하였다.

• 대한치과교정학회지
• /
• 제22권2호
• /
• pp.449-474
• /
• 1992

The purpose of this study was to evaluate the in vitro shear bond strengths to enamel and the failure sites of three ceramic brackets and one metal bracket in combination with light cured orthodontic adhesive. The brackets were divided into four groups. Each ceramic bracket group had different bonding mechanisms with adhesive. Group A; metal bracket with foil-mesh base (control group) Group B; ceramic bracket with micromechanical retention Group C; ceramic bracket with chemical bonding Group D; ceramic bracket with mechanical retention and chemical bonding. Forty extracted human lower first premolars were prepared for bonding and 10 brackets for each group were bonded to prepared enamel surfaces with $Transbond^{\circledR}$ light cured ortho dontic adhesive. Twenty four hours after bonding, the Instron universal testing machine was used to test the shear bond strength of brackets to enamel. After debonding, brackets and enamel surfaces were examined under stereoscopic microscope to determine the failure sites, Statistical analysis of the data was carried out with ANOVA test and $Scheff\acute{e}$ test using SPSS PC+. The results were as follows. 1 . There were statistically significant differences in mean shear bond strengths of three ceramic bracket groups (p < 0.05). Shear bond strengths of group C and D were significantly higher than that of group B and shear bond strength of group C was significantly higher than that of group D. 2. Group C and D both had significantly higher shear bond strengths than metal bracket (group A), but there were no significant differences in shear bond strengths between group A and B (p < 0.05). 3. The failure sites of four bracket groups were also different. Group C and D failed primarily at enamel-adhesive interface, but group A and B failed primarily at bracket base-adhesive interface. 4. Among all ceramic bracket groups, group B was very similar to metal bracket in the aspect of shear bond strength and failure site.

• 한국산업정보학회논문지
• /
• 제9권1호
• /
• pp.7-16
• /
• 2004

효율적인 최종 NC코드를 만들어내기 위해서 공구경로는 효과적인 방법으로 결정되어 져야한다. 이는 3축 CNC 공작기계상에서 자유형상의 벽을 가진 자유곡면을 가공할 때 특히 중요하다. 많은 CAD/CAM 시스템들은 자유곡면가공을 위한 NC코드 생성 시 직선 보간을 이용한다. 그러나 이 방법은 가공된 바닥 표면의 매끄러움과 가공시간, 그리고 CL파일 사이즈를 줄이기 위해서 보정되어야 한다. 곡선 가공이 이러한 문제들을 줄이기 위한 해결책이 될 수 있다. 단일화된 황삭과 정삭 알고리즘과 공구경로가 그래픽으로 시뮬레이션 되었다. 본 연구에서는 자유곡면 바닥을 가진 파켓을 3축 CNC 공작기계를 이용하여 일반적인 파켓 밀링을 위한 직선 보간과 직선+아크를 혼합한 보간을 위한 NC 공구경로 데이터를 만들기 위한 3D 격자 항행 알고리즘을 개발하였다.