• 대한안전경영과학회지
• /
• 제8권6호
• /
• pp.119-137
• /
• 2006

This paper seeks to Combination for Efficient Application of SPC/EPC minimize variability by transferring the output variable to a related process controllable variable, while SPC seeks to reduce variability by detecting and eliminating assignable causes of variation. In the case of product control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We consider an alternative EPC model with autoregressed disturbance. We compare three control systems; EPC, Cp, SPC combined system with EWMA, CUSUM and Shewhart. This paper shows through simulation that the performance of the integrated model of EPC and SPC, Cp is more preferable than that of EPC.

• 한국군사과학기술학회지
• /
• 제19권4호
• /
• pp.462-468
• /
• 2016

In this paper, we present the results of the numerical analysis employing CONWEP, LS-DYNA FSI(Fluid Structure Interaction), AUTODYN FSI, LS-DYNA ALE(Arbitrary Lagrange Eulerian) and combination of CONWEP and LS-DYNA ALE for blast door fracture and wave propagation through the tunnel by the external explosion. We compared the numerical analysis results with the subscale test data and selected combination of CONWEP and LS-DYNA ALE method as adequate data generation method for the FRM(Fast Running Model) software development. It is expected to save much time and costs by using the numerical simulation data for the various test conditions.

• 지식경영연구
• /
• 제8권2호
• /
• pp.31-52
• /
• 2007

Since the introduction of knowledge management systems, many studies have attempted to analyze its performance and identify the success factors. However, few studies have investigated the relationship between KMS technology characteristics and its quality. This paper attempts to categorize KMS technology functions into socialization, externalization, combination and internalization and then find the relationship between these functions and KMS quality. It also attempts to investigate the moderating effect of task characteristics in this relationship. Our research frame is derived from the well known task-technology fit model and the related KMS performance studies. A survey was conducted from 157 KMS users. It is found that both externalization and combination are important for KMS quality and this quality influences the KMS performance. Furthermore, it is confirmed that the task characteristics can moderate between the KMS technology and its quality.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.111-117
• /
• 2007

This paper presents a new approach to evaluate reliability indices of electric distribution systems using genetic Algorithm (GA). The use of reliability evaluation is an important aspect of distribution system planning and operation to adjust the reliability level of each area. In this paper, the reliability model is based on the optimal load transforming problem to minimize load generated load point outage in each sub-section. This approach is one of the most difficult procedures and become combination problems. A new approach using GA was developed for this problem. GA is a general purpose optimization technique based on principles inspired from the biological evolution using metaphors of mechanisms such as natural selection, genetic recombination and survival of the fittest. Test results for the model system with 24 nodes 29 branches are reported in the paper.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.74-78
• /
• 2003

The structural property of phenolic and non-phenolic lignin has an effect on the reaction rate of lignin by oxygen and chlorine dioxide respectively. Moreover, the undesirable degradation of cellulose followed by lignin degradation is influenced by chemical charge and reaction time. In this paper, several lignin model compounds were used to illuminate the interaction of oxygen and chlorine dioxide by varying the position of O and D(OD, DO, ODO and DOD), and gas chromatography method was used to investigate the degradation of lignin by determining the content of methoxyl groups in lignin. It was shown that structural properties of lignin models were more influential on the degradation and demethylation of lignin than the above combination. Combination of oxygen and chlorine dioxide, however, was more effective in degradation of lignin than only one stage, and three stages than two stages.

• 한국CDE학회논문집
• /
• 제17권1호
• /
• pp.1-6
• /
• 2012

The End Coupling is main component of the aluminum hot roll process. The End Coupling is used for transmission of rotational power with heavy-duty load. Fracture of the End Coupling cause serious economic losses because an End Coupling is a very expensive component and it takes a long time to repair it. Therefore, preventing the destruction of the End Coupling is essential for ensuring a long mechanical life cycle. In this paper, the parametric study on the End Coupling was performed in order to minimize maximum stress under operation loads. To verify the interference of spindle assembly with modified End Coupling, kinematics simulation was performed by applying the various combination type and dynamic boundary condition of the spindle assembly. The interference of optimized model was not occurred during combination process and driving process. As a result of an optimum design for life extension on End Coupling, the maximum stress of modified End Coupling was lower than that of the initial model by 26%.

• International Journal of Reliability and Applications
• /
• 제16권2호
• /
• pp.55-79
• /
• 2015

It is well known that using any additional information in the estimation of unknown parameters with new sample of observations diminishes the sampling units needed and minimizes the risk of new estimators. There are many rational reasons to assure that the existence of additional information in practice and there exists many practical cases in which additional information is available in the form of target value (initial value) about the unknown parameters. This article is described the problem of how the prior initial value about the unknown parameters can be utilized and combined with classical Bayes estimator to get a new combination of Bayes estimator and prior value to improve the properties of the new combination. In this article, two classes of Bayes-shrinkage and preliminary test Bayes-shrinkage estimators are proposed for the scale parameter of exponential distribution. The bias, risk and risk ratio expressions are derived and studied. The performance of the proposed classes of estimators is studied for different choices of constants engaged in the estimators. The comparisons, conclusions and recommendations are demonstrated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.196-197
• /
• 2014

Low carbon construction is an important operation management goal such as cost, time, and quality in construction community. This paper introduces a system which measures the variability of carbon dioxide amounts. First, this system allows creating construction operation models of which the level of detail is breakdown into the work task level. Second, the system implements sensitivity analysis along with a ranges of resources that are allocated in an operation model. It facilitates to find the optimal resource combination using the operation performances such as the amount of emissions, operation completion time, and cost. Lastly, it identifies the best fit probability distribution functions of performance criteria given a certain resource combination. It allows project manager to query the percentages to complete the operation within a limitation specified by the system users.

• Journal of the Korean Data and Information Science Society
• /
• 제18권1호
• /
• pp.73-80
• /
• 2007

Cointegration(together with VARMA(vector ARMA)) has been proven to be useful for analyzing multivariate non-stationary data in the field of financial time series. It provides a linear combination (which turns out to be stationary series) of non-stationary component series. This linear combination equation is referred to as long term equilibrium between the component series. We consider two sets of Korean bivariate financial time series and then illustrate cointegration analysis. Specifically estimated VAR(vector AR) and VECM(vector error correction model) are obtained and CV(cointegrating vector) is found for each data sets.

• 대한산업공학회지
• /
• 제32권2호
• /
• pp.82-90
• /
• 2006

Reconfigurability of machine tools is one of the critical factors to realize the responsive manufacturing systems to satisfy the mass customization production. This paper presents the methods to model the reconfigurable machine tools (RMTs) on Internet in response to change in the machining requirements. Specifically, the structure and motion model of machine tools using module combination rules and connectivity graph are developed. And we developed Internet-based simulator for designing of RMTs (ISD-RMT). In response to the user requirements, various structures of RMTs can be derived using the module combination rules and connectivity graph relationships. In addition, the user can verify generating structures through the control and simulation procedures.