• Journal of Astronomy and Space Sciences
• /
• v.5 no.1
• /
• pp.57-72
• /
• 1988

The long-term observational properties of the photometric behaviors of the short period(p=0.48 day) eclipsing binary system XY UMa are discussed. They are based on the UBV observatins, which were carried out by Geyer in the yaers 1955-1961, 1968, 1975-1984. Light curves of XY UMa revealed very large changes not only between consecutive observing nights, but also from season to season. Between 1955 and 1984, the mean system brightness increased about 30% during this time interfvals, meanwhile, the orbital period of this system was constant whithin 1.6% of its period. The colour index curve shows similar variations like the light curve but with a phase offset oscillation around the time instants of the primary minama. Observational evidence for photospheric and chromospheric activities on the XY Uma are also discussed.

• Textile Coloration and Finishing
• /
• v.7 no.2
• /
• pp.1-8
• /
• 1995

Polymer cationic agent was prepared by the initial polymerization of epichlorohydrin followed by amination with diethyl-amine. Cotton fibre treated with the polymer (6∼8% o.w.f.) is highly cationic and exhibit increased substantivity for anionic dyes. The modified substrate could be dyed with direct dyes without salt or a little salt from dye bath. The increased concentration of cationic agents resulted in an increase the colour yield. Futhermore, treated cotton has an electropositive surface charge. Adsorption of direct dye can be attributed to both van der waals force and electrostatic attraction.

• Advances in nano research
• /
• v.3 no.2
• /
• pp.67-79
• /
• 2015

Air stable nanoparticles were prepared from cobalt sulphate using tetra butyl ammonium bromide as surfactant and sodium borohydride as reductant at room temperature. The cobalt nanocolloids in aqueous medium were found to be efficient catalysts for the degradation of toxic organic dyes. Our present study involves degradation of Methylene Blue and Rhodamine-B using cobalt nanoparticles and easy recovery of the catalyst from the system. The recovered nanoparticles could be recycled several times without loss of catalytic activity. Palladium nanoparticles prepared from palladium chloride and the same surfactant were found to degrade the organic dyes effectively but lose their catalytic activity after recovery. The cause of dye colour discharge by nanocolloids has been assigned based on our experimental findings.

• 보존과학연구
• /
• s.16
• /
• pp.129-138
• /
• 1995

For the study of the pigments on lacquer with wooden for comparing a characteristics and chemical structures have been selected samples from tombs at Tanwol-dong, Ch′ungch′ong-do, Hwang-namtaech′ong, Anapchi Lake in Kyongju-shi and Miruksa Site. Analysis showed that red pigments on the lacquer with wooden from Anapchi Lake and Tomb at Tanwol-dong was found to Cinnabar, and those sample sexcavated from Hwang-namtaech′ong have been analyzed to calcite, maghematite and kornelite. In general, red pigments have two components like cinnabar and hematite. Hematite was found that red lacquer at Hwang-namtaech′ong was to beidentified Maghematite caused by their environment air pollution. Cinnabar was handled more valuable than hematite for unchanging characteristics for their colour under same condition since old times.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.187-192
• /
• 2006

Image fusion techniques are widely used to integrate a lower spatial resolution multispectral image with a higher spatial resolution panchromatic image. However, the existing techniques either cannot avoid distorting the image spectral properties or involve complicated and time-consuming decomposition and reconstruction processing in the case of wavelet transform-based fusion. In this study a simple spectral preserve fusion technique: the Smoothing Filter-based Replacement(SFR) is proposed based on a simplified solar radiation and land surface reflection model. By using a ratio between a higher resolution image and its low pass filtered (with a smoothing filter) image, spatial details can be injected to a co-registered lower resolution multispectral image minimizing its spectral properties and contrast. The technique can be applied to improve spatial resolution for either colour composites or individual bands. The fidelity to spectral property and the spatial quality of SFM are convincingly demonstrated by an image fusion experiment using IKONOS panchromatic and multispectral images. The visual evaluation and statistical analysis compared with other image fusion techniques confirmed that SFR is a better fusion technique for preserving spectral information.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.52-60
• /
• 1997

Hornbeam trees(Carpinus laxiflora BL.) are growing in Korea and have good characteristics such as relatively high density, fine texture, split- resistance, and white colour. However, they have seldom been used as manufacturing materials This study was carried out to evaluate the possibility of using hornbeam wood as bent, wood furniture materials. Softening methods were steaming and micro-wave heating. The specimens of $15{\times}15{\times}350mm$ were used green or air-dried, and were steamed at $100^{\circ}C$ for 20min, or microwave heat ed f or 60 seconds. The bending processing conditions are showed in Table 3. The minimum solid-bending radii of air-dried wood were 40mm for steaming and 200mm for micro-wave heating, respectively. And that of green wood were 40mm for micro-wave heating. In conclusion, both of the steamed wood and micro-wave heated green wood showed very good solid bending processing properties, but micro-wave heated air-dried wood were not sufficient for bent-wood furniture.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.532-536
• /
• 2002

Jookrhyuk (Bambusae Caulis in Liqamen) was extracted at low temperature (100℃ - 160℃) and purified by adsorption and distillation and their physicochemical properties were compared. In case of colour among all Jookrhyuk samples the L value appeared to be higher in the purified Jookrhyuk,and the b value appeared to be higher in crude Jookrhyuk. Purified Jookrhyuk showed much lower level of total sugar and tar contents than crude Jookrhyuk. A considerable reduction in concentration of methanol and phenolic compounds was achieved by purification process, whereas the content of acetic acid was increased. Therefore it was suggested that adsoption and distillation could be used as one of effective purification methods of various Joockrhyuk samples.

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.2
• /
• pp.52-60
• /
• 1983

Hornbeam trees(Carpinus laxiflora BL.) are growing in Korea and have good characteristics such as relatively high density, fine texture, split-resistance, and white colour. However, they have seldom been used as manufacturing materials This study was carried out to evaluate the possibility of using hornbeam wood as bent-wood furniture materials. Softening methods were steaming and micro-wave heating. The specimens of $15{\times}15{\times}350mm$ were used green or air-dried, and were steamed at $100^{\circ}C$ for 20min, or microwave heated for 60 seconds. The bending processing conditions are showed in Table 3. The minimum solid-bending radii of air-dried wood were 40mm for steaming and 200mm for micro-wave heating, respectively. And that of green wood were 40mm for micro-wave heating. In conclusion, both of the steamed wood and micro-wave heated green wood showed very good solid bending processing properties, but micro-wave heated air-dried wood were not sufficient for bent-wood furniture.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.302-309
• /
• 2009

This study investigated the effects of infrared (IR) radiation combined with air blast thawing on the physical properties of pork. Regardless of air velocity, increasing IR dosage produced an exponential increase in the thawing rate of pork. This rate increased further when air blast velocity was increased. IR treatments showed significantly lower thawing loss than that of 0 Watt treatment, while increasing air velocity significantly increased thawing loss of pork (p<0.05). Increasing both IR power and air velocity tended to decrease the cooking loss of pork. Moreover, increased IR power tended to decrease the water holding capacity and shear force of pork. The shear force changes were not significant (p>0.05). Shear force also increased with increasing air velocity. In addition, the higher the air velocity the higher the shear force of pork. In Commission Internationale de l'Eclairage (CIE) colour determination, control of temperature prevented discolouration from overheating of sample surface. The results suggest that IR dosage combined with air blast has potential in thawed meat quality aspects, and that humidity control could prevent surface drying.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.491-501
• /
• 2023

Comparing the effects of sodium tripolyphosphate (STPP) concentrations of 0.2% and 0.4% on beef semitendinosus is the objective of the current investigation. The samples were cooked at varied temperatures (45+60℃ and 45+70℃) and times (1.5+1.5 h and 3+3 h) using staged cooking. The colour properties, cooking loss, water retention, shear force, water-holding capacity, sarcoplasmic, and myofibrillar solubility, and total collagen were investigated. The cooking time and temperature affected the water-holding capacity, cooking loss, CIE L^*, CIE a^*, CIE b^*, myofibrillar, and sarcoplasmic solubility, with lower temperature and short time having the lower detrimental effect. However, the significant effect can be intensified after the addition of STPP with higher water-holding capacity and tender meat obtained with 0.4% phosphate concentration at any cooking conditions. The STPP lowered the collagen content and increased the protein solubility of myofibrillar and sarcoplasmic, which this degradation is used as a good indicator of tenderness.