• 대한치과보철학회지
• /
• 제48권2호
• /
• pp.151-157
• /
• 2010

연구목적: 본 연구의 목적은 금속염화물 용액 내 침지법으로 제작된 유색 지르코니아 블록의 임상적 응용을 타진해보기 위해 지르코니아 코어와 전장도재간의 전단결합강도를 평가하고자 함이다. 연구 재료 및 방법: 지르코니아 블록은 자체 제작한 것과 시판되는 제품을 이용하였다. 색소체 용액으로 크로뮴과 몰리브데늄을 포함하는 3가지 염화수화물 용액을 제조하였고, 대조군으로 상용되고 있는 색소체 용액을 준비하였다. 가로 5 mm, 세로 5 mm, 높이 10 mm의 직육면체 지르코니아 시편을 블록마다 40개를 제작하였고, 시편을 임의로 5개 그룹으로 나누어 색소체 용액에 침지하여 유색 지르코니아를 제작한 후, 도재를 가로 5 mm, 세로 5 mm, 높이 4 mm의 직육면체가 되도록 축성하고 소결하였다. 시편의 최대 하중값과 전단결합강도를 측정하고 파절된 시편의 파절면과 파절 양상을 검사하였다. 결과:1. 지르코니아 블록간의 전단결합강도는 통계학적으로 차이를 보이지 않았다 (P > .05). 2. 무색 지르코니아와 유색 지르코니아 간의 전단결합강도는 무색이 높은 경향을 보였으나 통계학적으로 유의한 차이는 보이지 않았다 (P > .05). 3. 유색 지르코니아의 전단결합강도 비교 시 색소체 용액의 종류에 따른 통계학적인 차이는 보이지 않았다 (P > .05). 4. 지르코니아와 전장도재간의 파절은 주로 혼합성 파절 양상이 관찰되었다. 모든 시편의 전장도재 파절은 지르코니아와의 계면이나 전장도재내에서 관찰되었으며 지르코니아의 응집성 파절은 보이지 않았다. 결론:유색 지르코니아와 전장도재의 전단결합강도는 무색 지르코니아보다 더 낮은 경향을 보였지만, 관찰된 수치는 임상적으로 허용 가능한 것으로 사료된다.

• 대한화학회지
• /
• 제52권2호
• /
• pp.133-139
• /
• 2008

고상추출 매질로 bis-(2-ethylhexyl)phthalate를 포함하는 polyvinyl chloride막을 사용하여 카드뮴의 잔유양 을 측정하기 위한 새로운 민감하고 선택적인 분광광도법을 연구하였다. Bis-(2-ethylhexyl)phthalate는 가소제로 사용되 었다. 수용액에서 Cd(II)은 색을 가진 Cd(II) - I- - MG 착체(여기서 MG는 malachite green이다). 형으로 있는 막에 의해 트랩되었고, 카드뮴 착체는 막에 농축되었다. 그린색의 막의 흡수는 분광광도법을 사용하여 629 nm에서 측정되었 다. 카드뮴 농도는 Cd(II) 농도와 25분 동안 착색후 막의 흡수 사이에 관계로 나타내는 검정곡선으로부터 계산하였다. 검정곡선은 시험용액에서 10-760 μgL-1 cadmium 범위에서 선형이었다. 3Sbl criterion의 검출한계는 1.8199 μgL-1 상 대 표준편차(RSD)는 4% (n=5).보다 적다. 제안된 방법은 Tadjan강(Sari-Iran), 에 있는 카드뮴의 잔량을 성공적으로 측 정하였다. 28.7 μgL-1의 평균 값을 얻었다.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.425-433
• /
• 1983

Fatigue tests by axial loading (R=0.1) were carried out to investigate fatigue crack growth properties of small surface cracks in mild steel at room temperature, 250.deg. C and 400.deg. C, by using flat specimens with a small artificial pit. All the data of the fatigue crack growth rate obtained in the present tests are determined as a function of the stress intensity factor range, so that the applicability of liner fracture mechanics to the fatigue crack growth of surface cracks at elevated temperatures is investigated and discussed in comparison with the data of type 304 stainless steel at room temperature and elevated temperature. The obtained results are as follows: 1) Relations of both surface fatigue crack length and its depth to cycle ratio fall within a narrow scatter band in spite of different stress levels. 2) The .DELTA. .sigma. .root. .pi. a-da/dN relation of surface fatigue crack growth at room temperature is independent of the stress level and can be plotted as a straight line at log-log diagram, but the relation at 400.deg. C depends partly on the stress level. 3) Relations of the fatigue crack growth into depth d(2b)/dN and is stress intensity factor range .DELTA. $K_{I}$, accounted for the aspect ratio variation, fall within a narrow scatter band for wide range of the applied stress levels. And .DELTA. $K_{I}$E-d(2b)/dN relations of mild steel at different stress level coincide relatively well with the data of type 304 stainless steel. 4) The value of aspect ratio obtained by a beach mark method and a temper coloring method approaches about 0.9 in common with crack growth and it is independent of stress level and temperatures. 5) The equi-crack length curve is parallel to S-N$_{f}$ curve at elevated temperatures.s.s.s.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.4111-4111
• /
• 2001

When a drug is prepared in a tablet, the active component represents only a small portion of the dosage form. The other components of the formulation include materials to assist in the dissolution, antioxidants, coloring agents and bulk fillers. The tablets are tested using approved testing methods usually involving separation and subsequent quantification of the active component. Tablets may also be tested by near-Infrared Reflectance spectrometry (NIRS). In the present study, based on NIRS and multivariate calibration methods, a novel and precise method is developed for direct determination of ascorbic acid in vitamin C tablet. Two different tablet formulations were powdered in three different sizes, 63-125 ${\mu}{\textrm}{m}$, and examined. Spectral region of 4750-4950 $cm^{-1}$ / was used and optimized for quantitative operations. Partial least squares (PLS) and multiple linear regression (MLR) methods were performed for this spectral region. The results of optimized PLS and MLR methods showed that reproducibility increase with decreasing grain size and standard error of calibration (SEP) of less than 1% w/w of ascorbic acid and a correlation coefficient of 0.998 can be achieved. The PLS method showed better results than MLR. Seven overdose and underdose samples (prepared in the laboratory to match marketed products) were tested by proposed and iodometric standard methods. A correlation between NIRS predicted ascorbic acid values and iodomet.ic values was calculated ($R^2$=0.9950). Finally, the direct analysis of individual intact tablets in their unit-dose packages (Blistering in aluminum and PVC foils) obtained from market were also carried out and a correlation coefficient of 0.9989 and SEP of 0.931% w/w of ascorbic acid were achieved.

• 한국식품위생안전성학회지
• /
• 제13권4호
• /
• pp.419-424
• /
• 1998

Zearalenone 검출을 위하여 Z-M-26 hybridoma cell을 mouse의 복강에 투여한 후 생산, 정제한 항체와 합성한 Zearalenone-oxime-OVA conjugate를 이용하여 ELISA법을 확립하였다. Carbonyl buffer로 희석한 Zearalenone-oxime-OVA conjugate를 4$^{\circ}C$에서 하룻밤 coating 하고 1% BSA용액으로 하룻밤 blocking한 다음, 1,000배 희석한 항체를 Zearalenone 또는 시료와 혼합하여 하룻밤 반응시키는 것이 효과적이었다. 또한 2차 항체와 기질용액의 반응시간은 각각 1시간, 30분이 적당하였고, 발색된 반응액 450nm에서 측정하였다. 이 분석법의 결과 0.1~100 ppb의 Zearalenone이 측정 가능하였으며, 본 실험에서 확립한 indirect competitive ELISA법은 농산물 중 Zearalenone 분석에 효과적으로 활용할 수 있으리라 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권3호
• /
• pp.73-80
• /
• 1998

In order to reconstruct the traditional technology of Korean golden varnish coatings, this study was carried out to separate and determine some main coloring components of the exudates of D. morbifera and its traditionally refined golden varnishes using a process of solvent extractions, chromatographies and spectrometries. The results obtained are as follows: 1. The exudate and its traditional-refined golden varnishes appear to have a kind of natural polyacetylenes because it has some triple bond peaks in FT-IR spectrometry. 2. Some yellowing spots of the polar-solvent extrats from the exudates and refined varnishes separated on TLC appeared under natural drying condition, but those of non-polar solvent extract such as hexane did not. 3. A traditional refining method for reconstructing a Korea golden varnishes was thought to be better than solvent separation because the former had higher triple-bond peaks than the latter in FT-IR spectrometry. 4. One of main conponents in the hexane-extracts of the traditional-refined varnishes and the exudates had the same molcular weighr of 204, but the fragmentation patterns was a little different between the exudate and the refined. in LC-MS soectrometry.

• 조형예술학연구
• /
• 제2권
• /
• pp.5-41
• /
• 2000

The purpose of this thesis is to study about destructive method in late twentieth Century Paintings. To do this we will consider the examples of Frank Stella and Anselm Kiefer's expressive methods. And this thesis is designed to investigate the change of the two Modes. The centering change is in the destructive manner of them, and they are traced systematically. In these chapters we will study the procedure of the destruction and specification of the Modes; the subject which contains the special element, the relation between it and the artist's willful meaning, morphological specification, symbol system formative language, subject, material and coloring way. etc. The origin of the methodology is systematically studied and the procedures of the content applicated are considered. In the special characteristics of the methodology, the special feactures it contains will be considered. The basis of the deconstructive idea from Nietsche, Derrida, Saussire, Andrew Benjamin and others will be applied to understand the two Modes of artistic methodology, and whether or not they can be tools of explaining the methodology of our time is distinguished. Next, the methodologically founded contents and concepts from Chapter#2 are related and intertwined together. The outer destructive aspect and inner destructive specification are centrally uncovered by the Interpretation. The resulting background of the Mode, the factor of destruction and central concept, along with the works, applied ideas, and pre-scholar's writings, are conjoined and explained. The characteristics of S Mode are revealed as being similar to those of Vandalic Destruction and Baroque formalistic Style, while K Mode is closely related to Iconoclastic Destruction and Neoclassical Antiformal Style.