• 패션비즈니스
• /
• 제15권5호
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Journal of Plant Biotechnology
• /
• 제42권4호
• /
• pp.342-349
• /
• 2015

키위는 세계적으로 1970년대 이후 상업화되어 최근 재배가 급속히 확대되고 있는 신종 과수이며, 국내에서도 재배와 소비량이 급격히 증가하고 있다. 키위는 자웅이주 낙엽성 덩굴 식물로 과피에 털이 있고 과육색이 다양한 특성을 가지고 있으며 배수성도 다양하나, 산업적인 품종 구성은 매우 단순하다. 독특한 식물적 특성에 기인한 진화 및 생물학적 관점은 물론 다양한 품종의 효율적 개발의 요구에 따라 최근 유전체 해석 및 활용 연구가 활발히 진행되고 있다. 키위 유전체 draft 서열과 엽록체 서열이 Illumina HiSeq 기반으로 각각 2013년과 2015년에 해독 되었으며 gene annotation 연구가 계속적으로 진행되고 있다. 과거 ESTs 기반의 전사체 분석에서 최근 RNA-seq 기반의 전사체 분석으로 전환되어 과일의 아스코르브산 생합성, 과육색 발현 및 성숙, 그리고 나무의 궤양병 저항성 관련 유전적 발현조절과 유전자 발굴 연구가 중점적으로 진행되고 있다. 전통육종의 효율을 증대하기 위한 분자표지 개발 및 유전자지도 작성에 있어서는 이전의 RFLP, RAPD, AFLP 기반의 연구에서 벗어나 NGS 기반의 유전체 및 전사체 정보의 해독에 의한 SSR 및 SNP 기반의 농업적으로 중요한 형질연관 분자마커 개발 및 고밀도 유전자지도 작성이 연구되고 있다. 그러나 국내 연구는 아직 제한적인 수준에서 진행되고 있다. 향후 키위 유전체 및 전사체 분석 연구는 가까운 장래에 실질적으로 분자육종에 적용될 것으로 전망된다.

• 한국토양비료학회지
• /
• 제42권3호
• /
• pp.187-191
• /
• 2009

'Campbell Early', a major grape cultivar, occupies more than 70% of cultivated vineyard areas, however, recommendable standard management system of soil environmental conditions has not been developed yet in Korea. The consideration for the correlation between fruit quality and soil condition in the vineyard is required in the efficient management system of soil. This study was carried out to investigate the optimum soil environmental conditions for 'Campbell Early' grape production with high quality. The results from analyses of correlation between them were used to develop soil management guideline for promoting efficiency in grape production. Soil properties were analyzed from 120 vineyards in Hawsung, Sangju, Yeongdong, Gimcheon, Yeongju, and Yeongwol, major grape production regions. Because there is neither coloring disorder nor delayed coloration in grape production of 'Campbell Early', relative contribution of soil hardness and solid phase to fruit quality and fruit weight was analyzed. Among the soil properties, while cation and soil hardness affected sugar content at the level of 39.3% and 36.8%, respectively, saturated hydraulic conductivity, solid phase, and cation exchange capacity (CEC) showed relatively low contribution to sugar content in the vineyard. The sugar content in grapes was influenced more critically by the chemical properties than the physical ones in the soil of vineyards. While soil hardness and solid phase affected grape weight at the level of 27.8% and 26.0%, respectively, phosphate content, organic matter content, and cation showed low contribution to grape weight. Grape guality such as sugar content and grape weight was affected highly by cation and organic matters. Therefore, cation and organic matter content of soil contributed to fruit quality at the level of 33.8% and 15.5%, respectively, in the vineyard.

• 에너지공학
• /
• 제7권1호
• /
• pp.146-156
• /
• 1998

석탄을 연소한 후 형성되는 석탄회는 미세한 분말상태로 입자의 형상은 다공성이며 단단한 구형입자로 이루어져 있다. 본 연구에서는 국내 발전소에서 생성된 9종의 석탄회의 물리적, 형태적 및 화학적 조성 분석을 통해 국내 석탄회 데이터 베이스화, 연소효율 개선, 석탄회 집진설비인 전기집진기의 성능향상과 석탄회의 재활용에 기여하고자 한다. 석탄회의 물리적 특성은 입도분포와 비중을 입자카운터와 한국공업규격(KS L-5110)에 따른 비중 측정계를 이용하였으며, 형태적 특성은 입자의 구형성 정도, 표면특성 그리고 색상변화 등을 전자현미경(SEM)과 광학현미경을 이용하였다. 그리고 화학적 특성을 파악하기 위해 유도결합 플라즈마방출 분광기(ICP)와 에너지스펙트럼 분석기(EDXA)를 이용하여 석탄회의 구성성분을 분석하였고 한국공업규격 KS L-5405에 따른 석탄회에 함유된 미연탄소분을 측정하였다. 삼천포 화력발전소 전기집진기에서 포집한 석탄회에 대한 질량평균입경은 각각 15~25 $\mu\textrm{m}$로 나타났다. 석탄회 입자의 형상은 석탄 입자가 보일러의 연소 영역에 노출되는 정도에 따라 구형성, 투명성 및 색변화가 다양하게 나타나는데 완전 연소에 가까울수록 무색의 구형입자가 형성되었다. 석탄회는 보일러 내의 연소 조건과 원탄의 성분에 따라 구형, 무정형, Cenosphere 그리고 Plerosphere와 같은 유형의 입자를 형성하며 입자간의 상호 작용에 의해 집괴, 응집 그리고 결정형의 입자군들을 형성한다. 석탄회는 산회광물질로 이루어져 있으며 주성분 SiO2, Fe2O3, Al2O3로 약 85% 이상을 차지하였으며 10% 정도는 미연탄소분으로 이루어져 있었다.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.29-41
• /
• 1993

In order to surface Hydrophobilization of Poly(ethylene terephthalate) (PET) fiber samples were treated in the atmosphere of CF$_{4}$ or $C_{2}$F$_{6}$glow discharge. The sample used in this study was PET film which is 75$\mu$m thick made by Teijin, O-Type(Japan). The cleaned samples were placed in plasma reactor made of pyrex glass cylinder, and plasma processing was carried out by glow discharge of CF$_{4}$ or $C_{2}$F$_{6}$ gas, being continuously fed by gas flow and continuously pumped out by a vacuum system. Electric power source for generate plasma state was sustained alternating current(60Hz) and voltage was sustained 600 volt. The duration of plasma treatment varied from 15 to 120 seconds except special case, the monomer gase pressure varied from 0.02 to 0.3 Torr and power range was 10 to 90 watts. The hydrophobic features of changed PET surface were evaluated by contact angle measurement and surface chemical characteristics were analyzed by ESCA. Results can be summerized as follows. 1. The most favorable setting position of substrate was the center area between the two electrodes. 2. $C_{2}$F$_{6}$ discharge current was lower than that of CF$_{4}$ when same voltage was sustained. Treated efficiency between CF$_{4}$ and $C_{2}$F$_{6}$ did not revealed significant differences under same electric power(wattage). 3. When monomer pressure is very low below 0.02 torr, as though substrate is exposed to CF$_{4}$ or $C_{2}$F$_{6}$ plasma, it tend to be hydrophilic through a little of fluorine bond and a great deal of oxidizing reaction. 4. There brought good hydrophobilization when monomer pressure was more 0.1 torr and duration of glow discharge treatment was over 45 seconds. When monomer pressure was too high, discharge current became low. Although prolong the duration, there was no more high hydrophobilization. 5. According to ESCA analysis, there were a little CF bond and a prevailing CF$_{2}$ bond in CF$_{4}$-treated substrate. There were CF$_{3}$, a little CF and a prevailing CF$_{2}$ bond in $C_{2}$F$_{6}$-treated substrate.d substrate.