• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.414-420
• /
• 2009

오리나무 열매 추출물을 사용하여 한지를 염색하여 매염제, 염액의 농도, 염색보조제가 색한지의 색과 염착량, 광견뢰도에 미치는 영향을 조사하였다. 제조한 색한지는 갈색을 나타냈으며 매염제를 사용하면 염화철과 초산구리의 경우 염착량이 증가하였고, 명반과 염화철 매염의 경우 $a^*$와 $b^*$ 값이 조금 줄어드는 것을 볼 수 있었으나 변화 크기는 작았다. 염액의 농도가 증가하면 염착량이 증가하였고 $L^*$ 값은 작아져서 색이 약간 어두워지고, $b^*$ 값은 커져서 노란색을 더 많이 띠었다. 염착제를 사용하면 염색성이 크게 향상되며 명반과 초산구리 매염한 경우보다 무매염과 염화철 매염한 한지에서 염색성의 향상이 더 컸다. 가속열화시험 결과 염착제를 사용한 색한지의 퇴색정도가 무처리 색한지보다 더 컸는데, 그 중 초산구리 매염을 한 색한지의 퇴색이 가장 작았다.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.47-57
• /
• 2007

This study focused on the properties natural dyeing and natural material and on the development of functional material for well-being in apparel industry. Comus officinalis Siebold et Zuccarini is used as natural dyeing material which had been reported that have curable effect for unbalanced immunity, geriatric diseases like urinary tract system, diabetes, hypertension, arthritis, tinnitus, hyperhidrosis and women's diseases like hypermenorrhea. And this material also has anti-cancer effect so that can restraint cancer cells. 3 kinds tester of cotton, wool and silk are dyed by boiled with each dye (flower, fruits, bark of tree) as first dyeing and dried in the shade. These testers are done by post-mordanting method. Aluminium Potassium(Alk(SO4)2), Cuprie Sulfate($CuSO4{\cdot}5H2O$), Stannous Chloride($SnCl2{\cdot}2H2O$), Ferrous Sulfate($FeCl2{\cdot}4H2O$), Titanium Sulfate 24% aqueous solution(Ti(SO4)2) are used as mordants. Dyeing results of Comus officinalis Siebold et Zuccarini flower and bark are shown as yellow color series. And dyeing result of fruits is pink color series. Silk shows the best dyeing property. As the point of view for dyeing property, Ti, Sn, Fe would be the properchoice for mordant. Following results are extracted in this study. Yellow color is resulted in dyeing with Cornus officinalis flower as non-mordanting condition. Yellowish red color is come from dyeing with Comus officinalis fruit as non-mordanting condition. Grayish yellow tone is resulted in dyeing with bark as non-mordanting condition. Orange tone color with Ti-mordanting, green tone color with Sn-mordanting and gray tone color with Fe-mordanting is resulted respectively. However light-fastness of Comus officinalis(flower, fruit, bark) is very low as 1 or 2 level in non-mordanting condition, Comus officinalis flower dyeing is turned out 3 or 4 level and fruit dyeing is 4 or 5 level, bark dyeing is 2 or 3 level with Ti-mordanting respectively. Eventually Comus officinalis fruit has the best light-colorfastness property among all of dyes. dry cleaning colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, perspiration-colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, With these results, this study could conclude that dye-ability, colorfastness problem is getting better after mordanting process and practical usage would be possible.

• Journal of the Korean Wood Science and Technology
• /
• 제47권2호
• /
• pp.163-177
• /
• 2019

폐MDF로부터 해섬하여 얻은 재생섬유를 Reactive Red H-E3B (Bis-monochlorotriazine(MCT)/MCT type)와 Reactive Red RB 133%(bis-monochlorotriazine/Vinyl sulphone type)로 염색할 때 최적의 염색조건을 구명하기 위하여 염색조건(염료 농도, 염과 알칼리 첨가량, 염색온도)과 염색특성 및 일광견뢰도와의 관계를 검토하였다. 2종의 반응성염료 모두 염료농도가 1~10(%,OWF)로 증가함에 따라 염착량(K/S)은 증가하였다. 또한, H-E3B가 RB 133%보다 염료 농도에 관계없이 K/S는 높았으며, 자외선 조사에 따른 색차는 낮아 자외선에 의한 변색 저항성이 양호하였다. 황산나트륨의 첨가량이 증가할수록 색차 및 K/S도 증가하였으며, 염의 첨가량은 50~70 g/L가 적절하였다. 2 g/L의 탄산나트륨 첨가에 의해 색차 및 K/S가 크게 증가하였으나 그 이상의 첨가량 증가에서는 거의 차이가 없었다. 탄산나트륨의 첨가량은 pH 10을 유지하는 5~10 g/L가 적절할 것으로 생각된다. H-E3B 염료는 염색 온도가 높아짐에 따라 염착량이 증가하다가 $80^{\circ}C$에서 다시 감소한 반면 RB 133%는 $60{\sim}70^{\circ}C$까지는 거의 동일한 염착량을 나타냈으나, 이후 감소하였다. 따라서 H-E3B는 $80^{\circ}C$, RB 133%는 $60^{\circ}C$가 적정한 것으로 판단된다. 이상의 최적조건에서 폐MDF 목질섬유를 염색처리하면 H-E3B염료는 1.5~2.0R, RB 133%염료는 9.6~10.0 PR의 색상을 가지는 염색 재생 목질섬유의 제조가 가능하였다.

• 한국의류학회지
• /
• 제28권12호
• /
• pp.1625-1631
• /
• 2004

개망초로부터 추출한 색소의 면 섬유에 대한 염색성을 조사하였다. 염색조건과 매염처리가 염착량(K/S값)및 CIELAB 색상에 미치는 영향을 평가하였으며, 또한 염색한 시료의 견뢰도를 측정하여 실용성을 확인하였다. 개망초 색소의 면 섬유에 대한 친화력은 높지 않았으며, Freundlich형의 등온흡착곡선을 보여 염착이 주로 수소결합에 의해 이루어지는 것으로 나타났다. 동시 또는 후매염처리 방법보다는 전매염처리 방법이 염차량 증진에 더 효과적이었으나, 주석매염제를 제외하고 매염제에 의한 염착량 증진효과는 크지 않았다. 매염처리에 관계없이 모든 시료는 Y계열의 색상을 나타내어 큰 변화는 없었다. 모든 시료의 세탁견뢰도는 낮았으며 , 땀 및 마찰견뢰도는 매우 양호하였으며 매염 처리가 견뢰도 증진에 미치는 영향은 크지 않았다.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.772-778
• /
• 2006

Silk organza can make the silhouette of clothes bulky and rich, owing to its stiffness. And silk organza in the gum has better dyeability so can be dyed more bright and deeper color than scoured silk because silk organza has sericin gum that has better dyeability than fibroin. So, silk organza came into the most broad use as the material for Hanbok, especially in summer. But the silk organza has poor color fastness. Sericin is removed from organza when silk organza go through scouring. The purpose of this research is to find out the optimum conditions that the scoured silk fabrics can get stiffness by persimmon juice treatment. For experiments, non scoured, partially scoured and fully scoured silk fabrics were prepared by alkali treatments. Then 3 kinds of silk fabrics were treated with the concentration of 1, 5, 10, 50 and 100% of persimmon Juice. The change of fiber surface of the various silk fabrics were observed By SEM. The hand values of those fabric samples also were measured hand values by Kawabata Evaluation System and stiffness by Cantilaver method. By scouring, the silk organza got more flexibility and less cohesiveness between their fibers. And it can be a little more bulky by removing gum. Namely, silk organza lost its unique stiff and crisp handle. By the persimmon juice treatment, tannin component could be coated on the fiber surface. so that the stiffness of the fabrics were improved.

• 한국의류학회지
• /
• 제35권2호
• /
• pp.218-229
• /
• 2011

Dyeing properties of cotton and ramie fabrics with pine needles colorants were studied by investigating the analysis of pine needles colorants, the effect of dyeing conditions (such as dye concentration, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for pine needles extract was 285nm, and pine needles colorants produced a yellow color. From FT-IR and GC-MS results, it was assumed that chromophoric substance from pine needles extracts were mixed with flavonol tannin and flavanol tannin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting and the dye uptake of fabrics improved by mordanting. The colorfastness of dyed fabrics showed a low rating; however, colorfastness to washing and dry cleaning of cotton fabrics mordanted with N.Cu, and friction fastness of ramie fabric mordanted with Cu improved. The dyed fabrics showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in fabrics dyed with pine needles extracts.

• 한국의류학회지
• /
• 제24권6호
• /
• pp.819-827
• /
• 2000

The purpose of this study is to produce cotton fabric having improved dyeability and colorfastness as well as retaining the desirable durable press property. When cotton fabric was treated with additives, nitrogen content was increased as the additive concentration was increased. DP ratings and wrinkle recovery properties of BTCA treated cotton fabrics were greatly increased. But DP rating was lowered slightly by adding additives and wrinkle recovery property was decreased with the increase of additive concentration. Tensile strength was decreased by BTCA treatment but increased as additive concentration was increased. Various BTCA/additive treatments produced great affinity for reactive and acid dyes when dyebaths were adjusted at pH 3. It was showed that dyeability was increased as additive concentration was increased. The most effective additive for improving the dyeing properties of the crosslinked cotton was TEAㆍHCl. In case of reactive dye, there was almost no improvement on the dyeability of finished cotton by adding salt. Color fastness to washing and light of finished and dyed cotton were low except for the washfastness of reactive dye. Dyeing the BTCA/additive treated cotton fabrics with reactive dye had no effect on the physical properties.

• 한국의류학회지
• /
• 제39권5호
• /
• pp.778-788
• /
• 2015

This study evaluated the characteristics and sensibility of work clothes materials developed that took into account the work environment of major industrial settings, for which a selection was made according to spring/autumn use and winter use. The physical properties of the existing and test weaving of the work clothes materials were compared after the test weaving of work clothes materials through material design, which altered the yarn count, composition, weave and density of material. To evaluate sensibility of work clothes materials subjectively, seven ranks' semantic differential scale questions were developed with polar adjective pairs. The test weaving of work clothes materials showed improved performance (such as tensile strength, dimensional change, water vapor permeability, and color fastness) compared to the existing materials. The common factor analysis indicated that the explanatory power of the cumulative variance for the spring/autumn use and winter use was 71.19% and 69.53%, respectively.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.356-361
• /
• 2010

This study was aimed to investigate the antibacterial efficiency of silver nano-particles and the dyeing properties of a brushed warp-knitted fabric. The properties of the brushed warp-knitted fabric containing silver nano-particle by field production processes were evaluated by analyzing its silver contents, antibacterial activity, color difference, exhaustion curve, fastness and tearing strength. Bacterial reduction ratio amounts to 91.4 and 99.9 for Staphylococcus aureus and Klebsiella pneumoniae respectively. As the brushed pile length of its fabrics is longer, the exhaution rate of disperse dye becomes higher. The brushing process of its fabrics reduces the tearing strength. The results indicate that the brushed warp knitted fabric containing silver nano-particle can be a practically promising product.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.325-331
• /
• 2010

The alkaline dissolution behavior of sea-island type ultrafine nylon fiber were dependent on the concentration of NaOH and treatment time, and the most appropriate condition for alkaline dissolution was to treat with 20g/l NaOH for 30 min at $80^{\circ}C$. The dyeing properties of sea-island type ultrafine nylon fiber and regular nylon fiber were examined with 3 different types of acid dyes in this study. The dye uptakes of ultrafine nylon fiber were higher than regular nylon fiber because of large surface area per unit mass, which increased as the dye bath pH decreased. The dyeing rates on ultrafine nylon fiber were faster and dye exhaustions were higher than regular nylon fiber, however color strength and rating of wash fastness were lower. It was also found that levelling type acid dye showed fast dyeing rate on both nylon fibers than metal-complex and milling type acid dyes.