• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.33-41
• /
• 1997

This paper surveys the extraction condition of polygenetic natural dye, Sappan Wood and the effect of ash to the dyeability and fastness. The appropriate time for extracting Sappon Wood was 1hour. The pH was increased as the amount of ash increase. The pH was nearly invariable according to the time of ash solution, the extracting times and temperature. Absorbance of dyeing fabrics was about 480nm. From the result of K/S value determination of fabrics, 10g/$\ell$ quantity of ash was surfficient for treatment and the amount of Sappon Wood was in 100% o.w.f.. K/S value of fabrics pre-mordanted or post-mordanted were higher than that of fabrics simultaneous mordanted.K/S value was increased as pH of mordanting bath decrease and pre-mordanting and post-mordanting fabrics increased the amount of absorption (K/S value) compared with non-mordanted fabrics. It was found that pH of mordanting bath affected the amount of absorption and color change of dyed fabrics. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the mordanting conditions and methods.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.396-403
• /
• 2000

The purpose of this study was to investigate the dyeing properties of silk, wool, nylon and poly(ethylene teraphtlate)〔PET〕 fabrics dyed with Tumeric(Curcuma longa) extracts. The dyeing property and color fastness were investigated by using the extracts and the post mordanting with Aluminum, Copper and Iron salts. In the UV-visible spectra, the maximum absorption of wavelength of the extract with methyl alcohol appeared at 420nm, and that of the extract with distilled water was at 415nm. Increasing the dyeing temperature, the K/S values of dyed fabrics were increased. The optimum dyeing condition was 30∼60 minute of dyeing time at pH 5∼5.6. Surface colors of silk and wool became dark by using mordants compared to those of nylon and PET fabrics. The drycleaning fastness of fabrics dyed with the extracts was good. The laundering and light fastness were improved by using mordants.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1994년도 추계 학술발표회
• /
• pp.66-67
• /
• 1994

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.154-165
• /
• 2020

To assign the functionality of the regenerated fiber from waste MDF(wMDF) made of pitch pine, we examined the dyeing characteristics of natural dyes, sappan wood as a polychromatic natural red series, monochromatic gardenia as a yellow series, and indigo blue series. For nonemordanting dye, the colors of regenerated fiber dyed by sappan wood and gardenia were reddish yellow (YR) and yellow (Y) series, respectively, and dyeing conditions were appropriate a 30 ~ 50 g/L of dyeing materials at 60 ℃ for 60minutes of dyeing time. We obtained regenerated woody dyed fibers (Re-WDF), YR to the red (R) series by premordanting with Al and Cu mordant for sappan wood and the purplish red (RP) series by Fe premordanting. In the case of gardenia, only Y series colors were developed in nonemordanting dye or all three mordants. Indigo dye produced Re-WDF with greenish yellow (GY) tone at 1%, green (G) tone at 3%, and blue (B) tone at 5% concentration or more. Re-WDF with indigo showed the best light fastness followed by sappan wood and gardenia. In particular, the light fastness of Re-WDF with gardenia was very poor. The light fastness was somewhat improved by premordanting(Fe>Cu>Al) both sappan wood and gardenia dyes.

• 패션비즈니스
• /
• 제9권1호
• /
• pp.113-119
• /
• 2005

In our previous study, the color development characteristics in the dyeing of silk fibers and PET fibers using Rhusjara ica and related properties were meticulously reviewed. At the same time, the fabric specimens were endowed with chitosan treatment prior to the dyeing procedure in order to investigate the effect of chitosan on the dyeing behavior. The analysis of the colors only, however, would not give us complete elucidation of the effect of fiber characteristics and the mordanting characteristics. In this study, the effect of chitosan and metal mordant treatment in dyeing of silk and PET fabrics using Rhusjara ica has been studied. The change of air-permeability, wash fastness, and light fastness were also investigated.

• 패션비즈니스
• /
• 제11권5호
• /
• pp.79-89
• /
• 2007

The effect of chitosan treatment on the dyeing and dye fastness, and mechanical properties of hair was investigated in this study when the carotinoid dyestuffs extracted from African Marigold(Tagetes erecta L.) were applied to the hair. The sequences of the chitosan treatment were changed in dyeing and mordanting procedures, i.e., pre-treatment, mid-treatment, and post-treatment. While the effect of chitosan application on the color shade change was not significant, the pre-treatment of the chitosan increased the dye uptake. Discoloration and fading was observed in the lightfastness test when chitosan was mid-treated. Alkali perspiration and acid perspiration fastness test results showed that chitosan post-treatment gave lower tendency. Washing fastness results showed that chitosan post-treatment and mid-treatment gave lower values, which indicates that chitosan deters the direct formation of insoluble complex among fiber-dyestuff-mordant. In the mechanical characteristics results, however, initial modulus and breaking strength increased significantly in the post-treatment and pre-treatment of chitosan.

• 한국의류학회지
• /
• 제29권2호
• /
• pp.279-285
• /
• 2005

In order to activate the characteristics of charcoals in fiber systems, this study was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on silk fabrics. The results obtained were as follows; The silk fabrics were dyed with gray color by charcoals effectively. The K/S value, that is indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Te dyeing effects were the highest with 50%(o.w.f.) of charcoals at $100^{\circ}C$ for 120 minutes in this experiments, It was observed the surfaces of silk fibers were mainly adcorbed with charcoal powders of the particle size from two micrometers to four micrometers by scanning electron microscope. Dyed silk fabrics showed comparatively low fastness to the fade of launding, the stain of the treatment of perspirations, and the strain of water fastness test, but good fastness to the stran of laundering, te drycleaning, the fade of treatment of perspirations, and the fade of water fastness test. In connection with the functional properties of dyed fabrics, the deodorizations were drastically improved, and the far-infrared emissions improved highly, and also the antibacterials were comparatively good.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.87-96
• /
• 1995

Colorant concentrates are prepared by use of concentration method of colorants extracted from Sappan wood using met hanol. Dyeabilities and fastness properties of silk fabrics dyed with concentrate of Sappan wood are investigated.The results obtained are as follows; 1. The storage stability of colorant concentrate is poor as concentration is excess. 2. Because the colors of dyeings are different with mordants, aluminium acetate, copper acetate, chromium alum and tin chloride are used in order to obtain reddish color. 3. The optimum dyeing temperature and dyeing time are 6$0^{\circ}C$ and 60 min, respectively. 4. Dry cleaning fastness is very good, and light fastness and washing fastness are low. 5. The dyeing method is simple owing to usehess of colorant concentrate prepared without extraction of colorant every time.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.24-30
• /
• 1996

In order to investigate the light fastness of amino azo disperse dyes, some kinds of disperse dyes were prepared and dyed to polyester fabric under the different conditions, such as single or mixture state. After the dyed fabric was irradiated with carbon arc light for several hours, the color differences and K/S values of fabric were measured. The light fastness of amino azo disperse dye was decreased by the introduction of OH group to the dye molecule. But when the amino azo dye was mixed with the anthraquinone disperse dye, the light fastness was increased. It was considered that the dye molecules were aggregated on account of hydrogen bonding via OH groups, resulting the decrease of surface area of dye molecule which might be irradiated by the light.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.181-193
• /
• 2013

The purpose of this study is to investigate dyeing properties and functionality of cotton and silk fabrics dyed with hot-water extract from Juniperus chinensis heartwood. Water-soluble dye of Juniperus chinensis heartwood extracted with distilled water was expressed YR color series. Dye uptake of cotton continued to increase according to the increase of the dye concentration. Its variation trends were shown to be similar to the isothermal absorption curve of the Freundlich. Dye uptake of silk was better than cotton, increased depending on increasing concentration of the dye, dyeing time and temperature. Its variation trends were shown to be similar to the isothermal absorption curve of the Langmuir. As the pH increased, the dye uptake of fabrics reduced and showed increased on red tinge. Colors of the dyed fabrics were various, depending on dye concentration and the mordant type and mordant concentration. Washing fastness, light fastness and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. And dyed fabrics showed antimicrobial abilities of 99.9% against Staphylococcus aureus.