• 한국잠사곤충학회지
• /
• 제41권1호
• /
• pp.61-69
• /
• 1999

모시, 삼베 및 견직물의 천연염료 염색 중 탄닌색소 함유 염료재료, 한약재 염료재료를 이용한 염색방법 구명 시험과 염색 후 항균성검증과 염색견뢰도를 측정한 결과는 다음과 같다. 가. 탄닌색소를 함유한 상수리나뭇잎, 호두외피, 밤송이 등의 추출액을 염색할 경우에 모시, 삼베, 견직물은 pH가 낮을수록, 또한, 염색온도가 높을수록 염섹직물은 짙게 염색되었다. 나. 홍화 염색에 있어서 홍색색소 추출온도가 40$^{\circ}C$에서는 염색 직물의 색상은 자주색(RP), 70$^{\circ}C$이상에서는 주황(YR)색상으로 변화되었다. 다. 염색견뢰도는 탄닌계 염재 및 쪽은 3~4급 이상으로 우수하였으며, 한약재 염재는 대부분이 3급이하로 불량하였다. 라. 주요 한약재 염재의 항균성은 직물별로도 차이가 있지만 소목의 균감소율이 낮기 때문에 항균성이 높았다.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.194-206
• /
• 2010

This study was carried out to identify the optimum dyeing conditions for maximum dye uptake of Prunus yedoensis Matsumura flower extract on silk fabric and to investigate hue/tone characteristics and fastness properties of the dyed fabrics. As results, the flower extract was found to contain flavonoids by FT-IR and to show yellowish shade by UV-vis spectrum. Silk fabric was optimized for maximum dye uptake to five repetitions of dyeing at $80^{\circ}C$ for 60 min with an extract concentration of 600% owf in terms of both K/S and color differences. Pre-mordanting was more effective to dye uptake than post-mordanting for all of the mordants used. Un-mordanted and pre-mordanted fabric showed YR(Yellow Red) while most of post-mordanted ones did Y(Yellow). Main tones of dyed fabrics were sf(soft) and lt(light) in the case of unmordanting or Al-mordanting whereas they were d(dull) and g(grayish) by post-mordanting with Cu, Cr, and Fe, respectively. The fastness grades to rub and dry cleaning were reasonably good for most dyeing conditions while those to light were poor. Finally dyeing condition for each hue/tone of the dyed silk with the flower extract was optimized considering fastness properties.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.171-179
• /
• 2017

This study was to investigate the practicality and functionality of water lily(Nymphaea tetragona) leaves as a natural dye resource while searching for various dyeing methods to utilize them. Effect of dyeing condition including methanol ratio of dyebath, dyeing temperature and time, mordanting method, etc were investigated. Colorants were prepared by extraction in methanol and followed drying process. When composing 30% of methanol in the dyebath, better dyeuptake and uniform dyeing were resulted. Pre-mordanting method gave better results in terms of dye uptake than post-mordanting method on the wool fabrics. Fe and Ti were effective for increasing the dye uptake on the silk fabrics. Depending on mordant type and mordanting method, the dyed fabrics got various color showing green, khaki, brownish yellow, dark brown, dark gray and so on. As for color fastness, the silk fabrics dyed with water lily extract showed relatively high rating in light fastness(3~4, 4~5 rating), washing fastness(4~5, 5 rating), and rubbing fastness(4, 4~5 rating). The silk and wool fabrics dyed with water lily leaves extract showed excellent antimicrobial activity over 98% of bacterial reduction rate against Staphylococcus aureus and Klebsiella pneumoniae. It was confirmed that water lily leaves can be used as a natural dye resource for dyeing wool and silk fabrics because its colorants showed excellent affinity and antimicrobial functionality as well as good colorfastness.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.71-83
• /
• 2005

In this study, we reviewed the color changes accompanying the laundering, wash fastness, and abrasion fastness of chitosan-treated cochineal-dyed fabrics. The treatment methods were classified into two based on the chitosan treatment: (Method 1): fabric specimens were pre-treated with chitosan prior to the dyeing procedure in salt form. (Method 2): the state of chitosan acid salt formation, coated on the yarn surface, was destroyed and neutralized prior to the dyeing process. The changes in the chitosan treatment methods bear more important meaning in view of the durability. In Method 1, it is highly likely for the chitosan to be detached from the surface by water during laundering since the chitosan is coated as acid salt state. In Method 2, the resistance d the chitosan to water was supposed to revive since the chitosan would return to its original state. Differences in the resistance of the chitosan treatrrent, however, according to the Method 1 and Method 2, fell short of our expectations. In Method 2, the wash fastness did not improve as we expected since the bond between the fibers comprising fabric specimens and the chitosan is not high even if the chitosan itself has high resistance to water.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.298-303
• /
• 2011

Aramid fibers have been widely used as the reinforcement for composites due to their high modulus and strength. Nowadays the safety measures is required to improve the personal protection. The dyeing of aramid fibers is considered to be very difficult and their dyeing mechanism is not well illucidated. Therefore, this study is to establish the dyeing & printing technology for aramid fibers. The effects of swelling agent and neutral salt in the dye bath on the obtained colors were studied. Also dyeing method of aramid fibers depending on dyeing temperature and dye concentration were established. Color fastness of the dyed aramid fabric with cationic dyes were acceptable excluding light fastness.

• 대한가정학회지
• /
• 제40권11호
• /
• pp.93-105
• /
• 2002

Nylon fabrics and stocking were dyed with artemisia dyeing solution, dyed with the natural dyestuffs that were manufactured from chestnut hulls by boiling in 0.5% NaOH solution and powdering in freeze dryer, and dyed with gromwell dyeing solution. Dyeabilities on nylon fabrics and stocking were good because of being amine group. All the dyed fabrics & stocking showed excellent in color fastness to laundering, and as poor as grade 1 to light fastness. But Light fastness of them could be improved to grade 3 or 4-5 by treatment with gallic acid and by repeated dyeing. Antimicrobial activities of the fabrics dyed with artemisia and gromwell against Staphylococcus aureus and Candida albicans were excellent in the aspect of bacteriostatic and fungistatic. There were not any distinct differences between mordant and non-mordant fabrics.

• 한국염색가공학회지
• /
• 제17권5호
• /
• pp.20-25
• /
• 2005

The colorants were extracted from black soybean using a buffer solution. Dyeing properties and the fastness of silk fabric dyed with black soybean extracts were investigated. K/S values of dyed fabric were increased with concentration of black soybean extracts. Magnesium sulfate, nickel sulfate and calcium chloride as mordants are used to obtain reddish purple color. Optimum dyeing temperature of black soybean extracts was $30^{\circ}C$. Fastness were generally good except for light fastness which was extremely poor.

• 한국염색가공학회지
• /
• 제12권4호
• /
• pp.248-255
• /
• 2000

Polyester fibers and fabrics have been dyed with disperse dyes in alkaline dyebath such as alkaline buffer and alkaline auxiliary(JPH-95) comparing a traditional acidic dyeing. After dyeing the samples were extracted with 100% DMF, and washing and rubbing fastnesses were measured. In dyeing at $100^\circ{C}$ the dyeing rate increased with decreasing fiber denier, regardless of dye baths, whereas the dyeing rates of the same denier fiber increased in the order of alkaline dyeing>acidic dyeing>JPH-95 dyeing. In dyeing at $130^\circ{C}$ the dyeing rate of PET fiber in JPH-95 dye bath decreased compared with the other two types of dye baths. In the time and temperature curve the dye uptake of JPH-95 dyeing was higher than the other two types of dye baths in the range of low temperature$(95~115^\circ{C})$. The equilibrium dye uptake increased in the order of 0.52d>2.04d>0.05d fiber. Washing fastness had no change in all three types of dye baths. But rubbing fastness was not good for alkaline dyeing except black dyes.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.262-270
• /
• 2013

Temporarily solubilized reactive disperse dyes containing ${\beta}$-sulfatoethylsulfonyl group were applied to 100% meta-aramid knitted fabric and their dyeing properties were investigated. Reactive disperse dyes showed relatively high K/S values on meta-aramid fabric when compared with conventional disperse dye or reactive dye, which showed very low K/S values. Color yields of reactive disperse dyes were highly dependent on dyeing pH and optimum results were obtained at pH 6. Percent exhaustion of reactive disperse dye on meta-aramid fabric was over 80% at 2% o.w.f of dye concentration. Wash fastness of pyridone-based reactive disperse dyes was very good to excellent while that of aminoazobenzene reactive disperse dyes was medium to good. Light fastness of all the reactive disperse dyes was very poor which seems to be due to the low photostability of meta-aramid fiber itself.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.19-29
• /
• 1997

A natural colorant was extracted from Clove using methanol. The dyeabilities and fastness of silk fabrics dyed with Clove extract were investigated. The results obtained were as follows; 1. The colorant extracted with methanol was higher in concentration than that with boiling water and was represented high reproducibility. 2. The optimum dyeing temperature and dyeing time were 6$0^{\circ}C$ and 60min, respectively. 3. The color depths were observed to be decreased as follows; pre-mordant > after-mordant repeat dyeing > after-mordant > simultaneous-mordant 4. Clove extract dyed brownish black on the Fe-mordanted silk. In case of the other mordants, silk fabrics dyed yellow. 5. The dyed silks had poor light-fastness but good wet-fastness.