• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.28-34
• /
• 2007

The optical and physical properties of alkyl-substituted anthraquinoid dyes were investigated in terms of dyeing of pure polypropylene fiber. The length of alkyl substituents of the dyes did not affect the molar extinction coefficient and maximum absorption wavelength of them. The use of a double-tailed cationic surfactant, didodecyldimethylammonium bromide(DDDMAB), could make the hydrophobic dyes dispersed in water effectively. As the amount of DDDMAB increased, the average particle size of dye dispersion decreased. Maximum color strength of the fabrics was shown in the case that 1.5 molar ratio of DDDMAB was used. As for the fastness properties, commercially acceptable result was obtained in general.

• Journal of the Korean Chemical Society
• /
• v.56 no.3
• /
• pp.348-356
• /
• 2012

In an attempt to find a new class of bisazo disperse dyes with better dyeing properties, a series of novel bisazo dyestuffs based on 4-arylhydrazono-3-(2'-hydroxyphenyl)-1-phenyl-2-pyrazolin-5-ones $\mathbf{3a-f}$ were prepared by diazocoupling of p-nitrophenyl diazonium chloride with 4-arylhydrazono-3-(2'-hydroxyphenyl)-1-phenyl-2-pyrazolin-5-ones $\mathbf{2a-f}$. Compounds $\mathbf{3a-f}$ were subsequently reacted with acetic anhydride in the presence of p-toluenesulfonic acid afford the corresponding O-acetyl derivatives $\mathbf{4a-f}$. The latter products as well as spectral data indicated that compounds $\mathbf{3a-f}$ exist predominantly in the azo-hydrazone tautomeric form (H) as the ZE-configuration. Additionally, two series of the synthesized dyes $\mathbf{3a-f}$ and $\mathbf{4a-f}$ were applied as disperse dyes for dyeing polyester fabrics and their fastness properties were evaluated. Also the position of color in CIELAB coordinates ($L^*$, $a^*$, $b^*$, $H^*$, $C^*$*) was assessed.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.381-388
• /
• 2010

The purpose of this study was investigate the dyeing property on chitosan crosslinked cotton fabric with cochineal at variable conditions. Chitosan crosslinked cotton fabrics were manufactured by crosslinking agent epichlorohydrin in the presence of chitosan. Chitosan crosslinked cotton fabrics dyed using cochineal were post-mordanted using Al, Fe and Cu. The dyeability(K/S) of chitosan crosslinked cotton fabrics were measured by computer color matching. Additionally the fastness to washing and light were also investigated. The dye-uptake of chitosan crosslinked cotton fabrics increased with the dyeing time. The saturated dyeing time was about 20minutes at $60^{\circ}C$. The dyeability(K/S) was remarkably increased with increasing content of crosslinked chitosan because of having a amine group of chitosan. Chitosan crosslinked cotton fabrics were dyed yellowish red by non and Fe mordanting, blueish red by Al and Cu mordanting, respectively. The washing and light fastness were increased by mordanting, especially Cu and Fe mordanting.

• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.377-384
• /
• 2008

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of gallnut was studied. In this study, the colorants of gallnut were extracted with boiling water. Chitosan crosslinked cotton fabrics were been dyed with aqueous extract of gallnut and their dyeabilities on the fabrics were studied. Additionally, the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(gallnut) by the chemical linking of chitosan to the cellulose structure. The chitosan finishing and durable press finishing of the cotton fabrics carried out simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkably increased as the concentration of chitosan was high. Dye ability of gallnut showed higher toward chitosan treated cotton than controlled cotton fabric under condition at $60^{\circ}C$, for 20 min. The hue value indicated reddish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was the almost the same.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.194-205
• /
• 2013

In this study, we report dyeing properties and functionality of cotton and silk fabrics dyed with methanol extract from Juniperus chinensis heartwood. Non-aqueous dye of Juniperus chinensis heartwood extracted with methanol was expressed reddish color. It showed relatively good affinity to silk than cotton. Dye uptake of cotton and silk continued to increase according to the increase of the dye concentration. Cotton was not affected by the dyeing temperature and time, however, dye uptake of silk was increased as the dyeing time and temperature were increased. Dye uptake of cotton and silk were the highest at pH 8 and pH 6 respectively. Dyed fabrics showed various colors depending on mordant types and mordant concentration. Washing, light and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. Also, dyed fabrics showed very good antimicrobial abilities of 99.9%.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.1-10
• /
• 2011

To investigate the combination dyeing properties of natural dyes, the combination dyeing using gallnut,-Al, Cu, Fe-sappan wood, and gallnut-Al, Cu, Fe-gardenia was performed on bast fiber of mulberry, cotton, silk, and their K/S values, colors, and sunlight fastness were measured. The gallnut-Al, Cu, Fe-gardenia dyeing showed the highest K/S values when the dyeing concentration of gallnut is 3%. It tended to show the higher K/S values than gallnut-Al, Cu, Fe-sappan wood. The silk showed the highest values of in K/S, and then followed by cotton, and bast fiber of mulberry. The mordants developed different colors on the bast fiber and the cotton treated with gallnut-Al, Cu, Fe-sappan wood. However, the silk showed a series of YR, showing no effect of the mordants on the development of color. The combination dyeing of gallnut-Al, Cu, Fe-gardenia showed a series of Y. The results showed that sappan wood could develop various colors but gardenia could develop a series of Y. No distinct improvement on sunlight fastness of the combination dyeing was observed.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.606-612
• /
• 2013

This paper investigates the physical properties of organic cotton staple yarns manufactured by ring and siro spinning methods as well as analyzes the physical properties of fabric specimens knitted with staple yarns made by these two methods. The breaking stress and evenness of organic ring staple yarns showed the same level for the Japanese specimens as the control yarns; in addition, the same coefficient for the friction of the manufactured yarns and Japanese specimens was also shown. These results makes it possible to manufacture organic staple ring yarns from organic cotton fibers. The tenacity and breaking strain of siro staple yarns were higher than ring staple yarns. The evenness and friction coefficient of siro staple yarns were lower than the ring staple yarns; in addition, hairiness and the number of siro staple yarns was significantly lower than the ring staple yarns. The dimensional stabilities of knitted fabrics by 20 Ne and 30 Ne siro staple yarns were superior to ring staple yarns. The color fastnesses of washing, perspiration and abrasion of knitted fabrics by two spinning methods showed the same level as the 4.5 grade; however, the light fastness of knitted fabric by siro staple yarns was superior to ring staple yarns. It was shown that the siro spinning method (using eco-friendly organic cotton fibers) was applicable to a high sensible knitted garment that overcame drawbacks of organic fibers related to shrinkable properties after washing and low color fastness to light.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.22-31
• /
• 2014

This study investigated the physical properties of warm up yarns and their knitted fabrics including the dye affinity and color fastness to washing of these knitted fabrics according to the various dyeing times and temperatures on dyeing process. The results were summarized as follows. The tenacity of Nylon/PP warm-up yarn was 4g/d and breaking strain was 4.5%. The wet and dry thermal shrinkages were higher than those of PET warm-up yarn. The maximum heat flow rate(Qmax) of Nylon/PP warm-up knitted fabric was lower than that of PET warm-up knitted fabric and heat keeping rate(a) of Nylon/PP warm-up knitted fabric was higher as 47% than that of PET warm-up knitted fabric. It was shown that the shape retention and wearing comfort of Nylon/PP warm-up knitted fabric were better than those of PET warm-up knitted fabric. The dye-affinity(K/S) of Nylon/PP warm-up knitted fabric showed maximum value at the dyeing condition of 40minute or 50minute dyeing time with $80^{\circ}C$ dyeing temperature, but PET warm-up knitted fabric showed maximum value at the 30minute or 40minute with $110^{\circ}C$ dyeing temperature. Finally, the color fastness to washing of Nylon/PP warm-up knitted fabric showed good value as between 4 and 5 grade.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.23-32
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional indigo dyeing. Leaf powder colorants were prepared by hot air($50^{\circ}C$) and room temperanrre($25^{\circ}C$) drying methods from fresh leaves. The presence of indigo in the leaf powder colorants was confirmed by UV/Visible absorption spectra. All the powder colorants showed broad absorption at 602 nm as same as synthetic indigo. Dyeing was done by reduction method with sodium hydrosulfite and sodium hydroxide. Leaf powder colorants produced blue color on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants prepared at room temperature drying were more stable for long term storage than that prepared by hot air drying. Thus, the powder colorants prepared by room temperature drying was reduced and dyed in one-step process without sodium hydroxide in the dyebath for further investigate dyeing properties. K/S value of the fabric dyed without sodium hydroxide was much higher than one dyed with sodium hydroxide. Regardless of the addition of sodium hydroxide, rubbing fastness was fairly good showing above 4 rating. Fastness to dry cleaning and light of the fabrics dyed without sodium hydroxide were mote higher than that dyed in alkaline condition.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.175-182
• /
• 2009

Waterborne polyurethanes (WPUs) based on isophorone diisocyanate and mixed polyols of poly(tetramethylene glycol) (PTMG)/polycarbonate diol (PCD) were synthesized. The variation of mechanical and dyeing properties and alkali resistance of the WPU films were analyzed according to the polycarbonate (PC) content. The tensile strength of the films increased and the elongation at break decreased with the PC content in the WPU film. The incorporation of PC component in the WPU film did not affect the alkaline hydrolysis behavior. The synthesized WPU solutions were used as impregnating resins for the production of PET artificial leathers. The prepared WPU resins showed the good color fastness to washing, rubbing, and light of the artificial leather fabrics. The improvement of the properties became greater with the PC content in the WPU resin.