• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.701-704
• /
• 2000

In this paper, we focus on digital watermarking for color images. At first, in order to embed the watermark signal in color image, we converted RGB color space to YCbCr color space which is a world-wide digital component video standard. In addition, we adopted the acceptable degree of color difference in order to keep the invisibility.

• Korean Institute of Interior Design Journal
• /
• no.19
• /
• pp.76-82
• /
• 1999

It is propelled that this study recognizes the significance of environmental color derived from counteraction of learning activities due to the random use of indoor color in elementary school. The purpose of this study is to provide by analysing low the elementary school's indoor color environment is effected upon the child's patterns of activity and consciousness structure, through questionaire survey the data needed for the establishment of the standard indoor color in elementary school.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.150-154
• /
• 2000

Coloring admixture is used for take color inside and outside of mortar and concrete, differently form pigment and spray paint take color limited surface. In our country, Using the coloring admixture is very slight and regulation is not yet about it. But that is expected the increase with raising the standard of living. Especially it is used to civil structure like dam and seawall for the environment harmony. Then we observe, in this experiment, the effect of coloring admixture on the material properties of color concrete and propose the suitable mix-proportion of color concrete.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.37-51
• /
• 2005

The solution way of color difference in display device is using a device profile recorded with color dimension, color properties of each device and is using sRGB color space. The color matching is better sRGB than RGB color space. The sRGB is independent device color space and based on the monitor characteristice. An accurate characterization of the display device is essential for color matching. The calibration and characterization process in display device is needed to transform the device dependent color to the device independent color. The process of characterization performs a linerizaiton and transforms the linearized values into the CIE XYZ tristimulus values. The purposes of this paper is to estimate color reproduction using device profile and to explain the propriety of transformation method using variable.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.42-53
• /
• 1999

Two dimensional flame temperature and KL value distribution from the luminous flame containing soot in a DI diesel engine were measured by the tow-color method using tow different wavelengths of the flame image. The combustion chamber of a DI diesel engine was visualized by elongating the piston and cylinder and the flame in the combustion chamber was photographed on a nega-color film using a high speed camera. In this study, color CCD camera was used to digitize the three color density of the film exposed to the flame and standard lamp . The accuracy of the measuring method depends on the calibration line of film made from a high temperature standard tungsten lamp. The formation and oxidization of soot in the diesel engine were studied by observing measured time history of KL factor and flame temperature . Also , effects of various shapes of combustion chamber and fuel injection on flame temperature. Also, effects of various shapes of combustion chamber and fuel injection on flame temperature and KL value distribution were examined.

• Korean Journal of Oriental Medicine
• /
• v.8 no.1
• /
• pp.105-108
• /
• 2002

To obtain a specific pharamcological effect, herbal medicines are processed based on the principle of traditional korean medicines. The problem in drug processing is the variety of methods, technics, and drug quality. In order to establish the base of standardization of processing methods, some herbal medicines(Evodiae Fructus, Scutellariae Radix, Astragali Radix, Zingiberis Rhizoma, Dioscoreae Radix, Aconiti Radix) were processed and studied the change a color tone of processed and unprocessed herbal medicines. The color tone(value and chroma) of these herbal medicines were changed after processing.

• Journal of Fashion Business
• /
• v.20 no.1
• /
• pp.98-114
• /
• 2016

This research study was performed to compare between Korean traditional color and digital transfer textile printing. This would help to find the new direction to apply Korean traditional colors to modern textile industry. The objective of this study is to digitalize Korean traditional colors to be applied to modern textiles, based on research studies by previous researchers, on the actualization of Korean traditional colors for textiles. The study focused on 21 red colors among others. Digital color palette of graphic program was printed on 6 different polyester textiles by using digital transfer textile printing. Different things to be supplemented were found by comparing the results with the colors of Korean traditional standard color names. After measuring the colors, Munsell color system and CIE $L^*a^*b^*$ value were measured then comparative study was performed on the measured values using 3D graphs. Measured colors of Munsell varied by color but in overall, chroma became low while brightness became high. Color characteristic of warm colors got weakened by turning into cold colors as brightness got high but yellow and red got low due to the characteristics of CIE $L^*a^*b^*$ value. This study has limitations with color analysis of digital transfer textile printing due to standardization of textiles and standardization of traditional colors however it can support to actualize the colors for the design using traditional color names by visualizing the color change of digital transfer textile printing in the future.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.1-6
• /
• 1998

The purpose of this study was to investigate the scope of color perception for Japan standard color. In addition to, we compared the difference in the color perception between the Korean and the Japanese undergraduates. 140 male and 119 female Japanese undergraduates were selected as the random sample. Color perception was made with the naked eyes. Minolta Chroma Metre CR 300 was used for physical measurement of the color. The results were as follows, 1) Japanese students' perceived color perception was classified into four large groups: simple group includes Red, Yellow, Blue, White, Gray and Black, X(-axis)group includes Green, Red Purple, Y(-axis)group includes Green, complex group includes Blue Green, Purple, Purple Blue, Red Purple. 2) There is difference between Korean color perception and Japanese; for Yellow Red, Blue, Blue Green, Red Purple. 3) There is little difference between the values of standard color and mean percept color for Yellow while big difference for Blue. And as for as country was concerned, Korean is more accurate than Japanese in color perception.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.114-124
• /
• 2006

The purpose of this study was to evaluate the tooth color changes of resin bonding sites and their adjacent sites on orthodontic bracket bonding. Sixty extracted sound premolars were used and the tooth color was recorded according to the CIE $L^*a^*b^*$ color system using a spectrophotometer. The tooth colors of the twenty premolars were measured and compared before bracket bonding and after removal. On a further twenty premolars, the tooth color was measured before and after only primer application. In the change of $L^*$ values, according to the bracket bonding and primer application, the lightness was decreased, and in the change of $a^*\;and\;b^*$ values, the color was changed into a more yellowish color The color differences $({\Delta}E^*)$ were calculated from the $L^*a^*b^*$ values and compared with the standard value of clinical detection $({\Delta}E^*=3.7)$. The color differences between before the bracket bonding and after removal noted exceeded the standard value and those of between before and after the primer application were not larger than the standard value. Toothbrushing was performed after application of the primer to evaluate the color changes according to the primer abrasion. As a control, toothbrushing was performed on the last twenty premolars. The color differences noted were larger than the standard value after toothbrushing. Also, to evaluate the color changes of the tooth which is exposed to sun irradiation after bracket removal, additional photoaging was performed and the color was measured for all teeth. The additional color differences after photoaging were smaller than the standard value. The above results suggest that the tooth color changes after fixed orthodontic treatment.

• International Journal of Contents
• /
• v.6 no.3
• /
• pp.25-29
• /
• 2010

Scanners play an important role in digitally reproducing the color and imaging of original documents used in public offices; however, the current system lacks a standard for digitized documents created by scanners, complicating efforts to create a digitized system. In particular, macrography cannot guarantee the accuracy and reliability of digitalized color documents, pictures, and photographs created by scanners. To this end, we develop a standardized evaluation tool and test target to certify digitalized documents created by a scanner in the domestic environment. In this study, we enhance the accuracy and reliability of scanned data to create an advanced standard evaluation tool for scanners. Moreover, to produce a scanner certification standard, we overcome existing problems related to the growing market. We anticipate that this new standard will see a high degree of application in the current environment.