• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.383-389
• /
• 2000

Stabilities to heat, pH, light were investigated about isolated red color pigment from the Korean Lithospermum erythrorhizon. The extracted pigment, acetylshikonin was stable heating at 40∼80$\^{C}$ for 1∼2 hours, hut it was specially unstable on the storage above 55$\^{C}$. The extracted pigment, acetylshikonin was stable on the sunlight under the red and green filters but unstable under the yellow and blue filters. The extracted pigment, acetylshikonin was stable under the pH of 4∼8 but unstable under the pH above 10. The extracted pigment, acetylshikonin was stable under the KCl and NaCl at concentration of 10$\^$-1/Mole. The pigment was very unstable under the CaCl$_2$, FeCl$_3$, CoCl$_2$, AlCl$_3$ and MnCl$_2$ at concentration of 10$\^$-1/Mole. The red pigment, acetylshikonin was stable under citric acid and acetic acid at concentration of 1 Mole. Especially, acetic acid was effective for the stability of the pigment.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.23-29
• /
• 2010

Pigment concentrates with violet-red color and sweet taste were obtained from purple-fleshed sweet potato(PFSP) using ethyl alcohol and water. Extract from general potato(GP) were used as a control. The relative stability of PFSP pigment concentrate(PFSPPC) in a storage test over 15 days was confirmed in the order of dark > fluorescence > sun-light irradiation. The relative stability of GP pigment concentrate(GPPC) in a storage test over 15 days was confirmed in the order of sun-light > fluorescence > dark storage. The RRP of PFSPPC was higher than that of GPPC, but the color strength of GPPC was 1/2 that of PFSPPC. Treatment of PFSPPC with aluminum potassium sulfate(0.2~0.3%, w/w) best improved its stability. The improved RRPs of PFSPPC were 45.16~47.31% in sun light irradiation, 55.91~60.22% in fluorescence irradiation, and 76.34~75.97% in dark storage conditions. In substituting aluminum potassium sulfate for chitosan, an amount of 0.2~0.3%(w/w) was suitable, giving similar results in improving pigment stability for all concentrates tested. Also, freeze-dried PFSPPC powder was manufactured as a substitute for dextrin, and also as a substitute for chitosan to the extent of 0.25%(w/w). The results of storage stabilite for freeze-dried PFSPPC and GPPC powder over 15 days, irradiation were, PRRs of 74.47~89.36% and 61.54~76.92%, respectively. The stability improving effect of freeze dried PFSPPC powder was confirmed by the results of storage experiments at various conditions. The use of freeze-dried PFSPPC powder was therefore confirmed to be an effective treatment for general foods.

• Microbiology and Biotechnology Letters
• /
• v.28 no.2
• /
• pp.111-116
• /
• 2000

Cultural conditions for the production of water-soluble pigment from mycelial culture of Cordyceps scarabaeicola KEFC-C252 and antimutagenic activity of the pigment were investigated. To obtain the maximum productivity of the pigment from mycelial culture of C. scarabaeicola KEFC-C252, the optimized medium was made with 1.5% sucrose, 2.5% yeast extract and initial pH 5.5. C. scarabaeicola KEFC-C252 was cultivated to reach the maximum concentration of the pigment at $26^{\circ}C$ for 108 hrs. C. scarabaeicola KEFC-C252 produced about 1.2 g/liter pigment under the optimized condition. The pigment was isolated from the culture filtrate by ethylacetate extraction, acidic precipitation and crystallization. The isolated pigment was scarlet hexagonal column crystal, and the color of the pigment was changed according to pH of the solution. The pigment showed violet in the alkaline water but showed red color in the acidic water. The pigment showed inhibitory activity against mutagenic activity induced by 4-nitroquinoline N-oxide. Furthermore, the pigment showed inhibitory activity against spontaneous mutation on Salmonella typhimurium TA98 and TAlOO.

• Food Science and Biotechnology
• /
• v.14 no.2
• /
• pp.275-279
• /
• 2005

The objective of this study was to investigate the color development and shelf-life effect of low-fat sausages (LFS) during refrigerated storage according to the additions of sodium lactate (SL), chitosan, and lac pigment. The LFS samples had $73{\sim}76%$ moisture, $3{\sim}4%$ fat, and $13{\sim}16%$ protein with a pH range of 6.4-6.6. The addition of chitosan ($MW\;=\;30{\sim}40\;kDa$) to LFS increased most textural properties. Hunter a (redness) values were increased by the addition of 0.05% lac pigment. The microbial growth of Listeria monocytogenes increased with increasing storage time. The addition of 2% SL and 0.3% chitosan with MW higher than $30{\sim}40\;kDa$ effectively inhibited the growth of L. monocytogenes. The microbial growth of L. monocytogenes was further reduced with increasing chitosan MW. These results indicated that the combination of SL with chitosans (MW > 30 kDa, 0.3%) and lac pigment (0.05%) improved shelf-life and color development in LFS during refrigerated storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1544-1551
• /
• 2004

Effects of pH, sugar, ascorbic acid, organic acids and light sources on the stability of anthocyanin pigment extracted from Korean purple-fleshed potatoes (PL-6, PL-28, PL-31 and Jasim) were studied. The pH had remarkable influence on the color stability of anthocyanin pigment. With increasing pH, the color gradually fades as colorless pseudobases are formed. In acidic pH, anthocyanin was stable, but with increasing pH the color gradually changed to colorless. The addition of sugar decrease in color stability of the pigment during storage period. The most of organic acids, such as a tartaric, citric and succinic acids, were found to improve the stability of the pigment, while malic and malonic acid reduced the stability of the pigment. The addition of ascorbic acid considerable decreased in anthocyanin pigment stability, but the effect was not decreased by adding thiourea. The effect of light sources such as a darkroom, a fluorescent light, and sunlight, reduced gradually the stability of anthocyanin pigment. Therefore the pigment degradation could be minimized by shielding the light from the pigment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.76-81
• /
• 2011

This study was carried out in order to develop a speciality functional coated paper, which can be recognized under a ultraviolet lamp. The special fluorescent whitening agent (FWA) which absorbs ultraviolet light (397~410 nm) and emits it as yellowish light (570~500nm) was used. The special FWA was applied in a coating color in two ways: (1) direct application to a coating color as a FWA; (2) application on pigment surface, drying it and application it as a fluorescence whitening pigments (colored pigments). The effects of the special FWA on coating color properties were tested and the distribution of colored pigments in coated paper was evaluated under a ultraviolet lamp. The results showed that the colored pigments didn't affect on coating color properties. Experimental results showed the possibility of producing a security coated paper using the special FWA. To produce a speciality functional paper, it was found to be proper to apply the special FWA in the form of colored pigment.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.95-100
• /
• 2017

In this study, various Pigment Red 57:1 samples and also their dispersant were prepared in various synthesis conditions via changing parameters such as synthesis time, pH, derivative content and synthesis temperature in order to analyze the pigment particle behaviors and their spectroscopic and physical properties. Each sample was analyzed using Fourier infrared spectroscopy, UV-Vis spectroscopy, particle size analyzer, color spectrophotometer and X-ray diffractometer and their characteristics were compared. As a result, it was possible to control the size of pigment particles by controlling the synthesis conditions.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.838-843
• /
• 2006

The chemical processes involved in the formation of green pigment in crushed garlic cloves were investigated based on the principle of pink pigmentation in macerated onions. Intact greening and non-greening garlic cloves were either left untreated or heated at $90^{\circ}C$ for 3 min to inactivate enzyme activities. First, a colorless ether soluble compound referred to as color developer reacted with glycine (among all free amino acids) in garlic to form a second compound insoluble in ether. The latter compound then reacted with formaldehyde to yield the green colored pigment. Alliinase activity was necessary for the production of color developer and for the development of green pigment. In greening garlic that had been heat treated, green pigmentation did not proceed due to the heat-inactivation of alliinase, but the addition of alliinase solution into the garlic homogenates restored the pigmentation. However, this phenomenon was not observed in non-greening garlic with or without heat treatment. Finally, the mechanism of green pigment formation in crushed garlicis similar to that of pink pigment formation in macerated onions.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.335-344
• /
• 2011

The pearlesent pigment has received attention in a diversity of fields like cosmetics, inks, paints and so on. Ferric Ferrocyanide, one of the nano sized pearlescent pigment, is a kind of surface modification pigment that covers a metal oxidized substance or a coloring agent with uniform thickness. Characteristics of pearlescent pigment are various interference color, intense gloss effect and a three-dimensional effect. We synthesised the pearlesent pigment that ferric ferrocyanide can be deposited on the titania/mica surface by hydrothermal synthesis method. The process parameters are concentration of precursor, controlling pH and reaction temperature. The optimun conditions is that amount of iron(III) chloride hexahydrate is 3.1 wt% and amount of potassim ferrocynide trihydrate is 3.6 wt% in the started pH 4.5 at $70^{\circ}C$. The coating rate and coating efficiency of ferric ferrocyanide was about 1.47 % and 96.7 %, respectively. The synthesised pearlesent pigment was characterized by SEM, XRD, FT-IR and EDS.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.79-86
• /
• 2021

This study investigated the effect of a pigment (C. I. Pigment Red 122) addition on mechanical properties of the epoxy resin, diglycidyl ether of bisphenol F (DGEBF) and G640 curing agent. The K/S value, thermal properties, tensile properties, and fracture toughness of the prepared epoxy samples were evaluated. When the pigment was added to the DGEBF/G640 epoxy system, the color of the epoxy resin changed to red from transparent and yellowish color, and the K/S value in the red region increased as the pigment content increased. When the pigment content was increased up to 0.1 phr, the tensile strength was improved up to 21.8 %, whereas the pigment content was over 0.1 phr, the tensile strength decreased. The fracture toughness was improves up to 23.1 % until the amount of pigment added was up to 0.2 phr, and then decreased when the amount of the pigment added was more than 0.2 phr. This attributed to the aggregation of the pigments in the epoxy resin when the amount of the pigment added was more than 0.2 phr. Therefore, the coloration of the epoxy resin with an organic pigment must be carried out very carefully because the coloration of epoxy resin affects its mechanical properties.