• 정보기술응용연구
• /
• 제3권2호
• /
• pp.133-147
• /
• 2001

본 논문에서는, 문자와 그림을 포함한 컬러 영상에서 낮은 명도의 색상으로 인쇄된 문자를 효율적으로 추출하기 위하여, 컬러 영상에 대한 2치화와 잡음을 제거하는 새로운 방법을 제안하였다. 컬러 영상에 포함된 문자를 추출하기 위한 컬러 영상의 2치화는, 입력영상의 배경후보영역과 문자후보영역의 화소수 비에 따라 이 두 영역간의 컬러 관계성을 구하고, 이 관계성과 예비임계값에 의해 계산된 임계값에 의하여 이루어진다. 예비임계값은 입력 영상에 대한 RGB 히스토그램의 분석에 의하여 구하며, 입력영상의 배경후보영역과 문자후보영역의 기준이 된다. 제안한 임계값은 잡음의 양에 따라 동적으로 계산되므로, 문자정보는 최대한 유지하고, 잡음은 효과적으로 제거할 수 있다. 또, 본 연구에서는 2치화 영상에 포함된 잡음의 효과적 제거를 위하여, 다양한 컬러 영상의 2치화 영상에 포함된 잡음패턴을 분석하여 잡음패턴 테이블을 만들었다. 2치화 영상에 포함된 잡음은 잡음패턴 테이블과 템플릿 매칭을 하여 잡음의 분포도가 계산되고, 이 분포도에 의하여 잡음의 난이도를 3단계로 분류하였다. 잡음의 제거는 분류된 난이도에 따라 별개의 처리 과정을 두어 수행하므로, 잡음제거의 효율을 높였고, 처리시간을 줄였다.

• 복식
• /
• 제38권
• /
• pp.143-157
• /
• 1998

This research is to aim at presenting arrangement of colors, visual and symbolic through combined coupling ofI-Ging and Sackdong. This combined couplings is attempted to be approached by the following 4 conceptual steps :ⅰ) Is it appropriate to even try to coupleI-Ging with Sackdong\ulcorner ⅱ) Is the basic structure of Kwai an object of stripe colorizing\ulcorner ⅲ) What are the fundamental colors for this purpose\ulcorner ⅳ)combined of Kwai and the fundamental colors. Theoretical background for this study is as follows.ⅰ) Color accord and arrangements of existing Sackdong. ⅱ) An attempt to coupleI-Ging with Sackdong The purpose of this research is to expand concrete concept of Sackdong, which is to be utilized not only in costume design, but in the whole realm of design, by presenting feasible application of stripe coloredI-Ging. The summary of conclusion of this research is as follows. A. Is this aforementioned attempt academic\ulcorner B. Standardization of stripe-coloring is essential. Furthurmore we can conclued that the under-standing ofI-Ging and its basic philosophical background and the fundamental mechanism of colors in traditional costumes is necessary condition for standardization of Kwai. Along this path, however, conditions to be satisfied and priorities to be given depend upon the decision of an individual or a group. In my view, sripe-colorizing of 64 Kwais ofI-Ging followed by intuitive matching of colors with the in-terpretation of Kwais seems to be the most appropriate solution.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.1-9
• /
• 2006

Treatment of PET fabrics with alkali, chitosan and Al-mordanting has been carried out and the role of the chitosan coating in the dyeing process was clarified. The pre-treatment was effectively evaluated differences in dyeing behavior between its treated and untreated PET fabrics using wood of Caesalpinia sappan. The pre-treated on PET fabrics has been examined by SEM and evidence for the presence of chitosan sought using a air permeability test. Similar colour fastness by computer color matching(CCM) obtained on both untreated and pre-treated PET fabrics. The pre-treated PET was found to be of a deeper hue to that of its dyed untreated PET and, despite of its better colour depth, the wash fastness of the pre-treated dyeing was comparable to that of its dyed untreated PR. The application of chitosan or mordanting reveled that pre-treatment imparted to the PET additional functional groups that were available for coordination with the Brazilin.

• 대한의용생체공학회:의공학회지
• /
• 제35권2호
• /
• pp.14-18
• /
• 2014

This study is about e-Book program based on human-computer interaction(HCI) system for physically handicapped person. By acquiring background knowledge of HCI, we know that if we use vision-based interface we can replace current computer input devices by extracting any characteristic point and tracing it. We decided betweeneyes as a characteristic point by analyzing facial input image using webcam. But because of three-dimensional structure of glasses, the person who is wearing glasses wasn't suitable for tracing between-eyes. So we changed characteristic point to the bridge of the nose after detecting between-eyes. By using this technique, we could trace rotation of head in real-time regardless of glasses. To test this program's usefulness, we conducted an experiment to analyze the test result on actual application. Consequently, we got 96.5% rate of success for controlling e-Book under proper condition by analyzing the test result of 20 subjects.

• 한국도로학회논문집
• /
• 제13권1호
• /
• pp.177-183
• /
• 2011

VES-LMC(Very-Early Strength Latex Modified Concrete)는 콘크리트의 내구성 향상에 기여하는 SB라텍스를 첨가한 신속개방형 보수보강재로서로 교면재포장 및 콘크리트포장 보수에 적용되고 있다. 그러나 VES-LMC의 밝은 색상은 운전자에게 시각적 부담을 유발하여 주행성을 저하시킬 수 있어, 심리적 안정 도모를 위해 VES-LMC의 색상을 인접한 아스팔트 포장구간과 유사한 흑색으로 개발할 필요성이 대두 되었다. 따라서 본 연구에서는 흑색안료인 카본블랙을 시멘트량 대비 2% 첨가한 흑색 VES-LMC에 대한 현장 적용성 및 공용성을 평가하고자 하였다. 현장 적용결과 흑색 VES-LMC는 기존 VES-LMC와 비교하여 작업성, 슬럼프, 공기량 등에는 변화가 없었으며 양생 4시간에서는 20MPa 이상을 발현하였다. 공용성 평가결과 흑색 VES-LMC는 일반콘크리트와 아스팔트포장 구간에 비하여 온도응력발생량이 가장 적은 것으로 평가되었으며, 이것은 콘크리트의 안정성을 의미한다. 특히 결빙시 영하권에서도 상온을 유지하여 도로결빙을 예방하고 융빙을 촉진할 수 있을 것으로 기대된다.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권4호
• /
• pp.187-194
• /
• 2015

본 논문에서는 RGB-D 입력 영상들로부터 3차원 공간을 움직이는 카메라의 실시간 포즈를 효과적으로 추적할 수 있는 시각 주행 거리측정기를 제안한다. 본 논문에서 제안하는 시각 주행 거리 측정기에서는 컬러 영상과 깊이 영상의 풍부한 정보를 충분히 활용하면서도 실시간 계산량을 줄이기 위해, 특징 기반의 저밀도 주행 거리 계산 방법을 사용한다. 본 시스템에서는 보다 정확한 주행 거리 추정치를 얻기 위해, 카메라 이동 이전과 이동 이후의 영상에서 추출한 특징들을 정합한 뒤, 정합된 특징들에 대한 추가적인 정상 집합 정제 과정과 주행 거리 정제 작업을 반복한다. 또한, 정제 후 잔여 정상 집합의 크기가 충분치 않은 경우에도 잔여 정상 집합의 크기에 비례해 최종 주행 거리를 결정함으로써, 추적 성공률을 크게 향상시켰다. TUM 대학의 벤치마크 데이터 집합을 이용한 실험과 3차원 장면 복원 응용 시스템의 구현을 통해, 본 논문에서 제안하는 시각 주행 거리 측정 방법의 높은 성능을 확인할 수 있었다.

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.869-876
• /
• 2006

파편형태로 출토되는 토기 문화재의 경우 신속하고 정확한 복원이 중요한 과제이다. 기존의 방법은 시행착오법으로 조합하므로 정확하지 않을 뿐만 아니라 많은 시간이 소요되어 왔다. 이를 3차원스캐닝방법으로 쉽게 모델링 할 수 있다면 조각끼리의 조합작업도 매우 효율적으로 할 수 있다. 본 연구에서는 원형(原形)의 토기를 3차원 패턴스캐닝 방법과 사진측량방법으로 모델링하였으며 파손으로 인한 각각의 토기조각을 스캐닝하고 모델링하였다. 사진측량의 영상획득을 위해 Canon EOS 1DS real size 디지털사진기를 검정하여 사용하였다. 형성된 모델의 단면간의 상관성을 분석하여 효율적으로 조합하였으며 잔차와 칼라오차맵을 통해 오차를 분석하였다. 또한 가상박물관을 위한 사용자 중심의 웹기반 3차원 시뮬레이션환경을 구축하였다.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.131-147
• /
• 1986

The purpose of this study was to observe the color matching of lining or filling materials according to the remaining tooth material. Twenty-seven freshly extracted human central incisors were used in this experiments. The teeth were stored in saline solution at room temperature after extraction. All teeth were cut parallel to the tangent to height of contour on labial surface from the lingual surface until the pulp were completely removed. Then 27 teeth were devided into 0.5mm, 1.0mm and 1.5mm reduction groups according to the thickness of cutting the lingual surfaces of teeth. The specimens of control group were three teeth of 27 teeth with cutting the lingual surface same mode as above described. In the specimens of experimental groups, 8 kinds of lining and filling materials; FUJI IONOMER TYPE II (G-C Co. Japan), LINING CEMENT (G-C Co. Japan), Dycal (Caulk, U.S.A.), CLEARFIL F II (Kuraray Co. Japan), Crown Bridge & Inlay Cement (G-C Co. Japan), Copalite (Harry J. Bosworth Co. U.S.A.), HY-BOND (G-C Co. Japan) and LIV-CENERA (G-C Co. Japan); applied on the back of 24 teeth with 0.5mm, 1.0mm and 1.5mm cut thickness of lingual surfaces. Three teeth of control group did not applied linging or filling materials on the back of 3 kinds of different thickness of cutting the lingual surfaces. The absorbances of total 27 specimens were obtained by reflection spectrophotometer. (Cary 17 D, Varian Co, U.S.A.) The following conclusions were drawn from above the results; 1. The absorbance patterns in both experiment and control groups were gradually decreased with increasing wavelength of spectra. 2. The absorbance patterns were not decreased in relation to the kinds of lining or filling materials, but the amount of the remaining tooth materials. 3. In 0.5mm reduction group, FUJI IONOMER TYPE II, LINING CEMENT, LIV-CENERA and Copalite applied on the back of cut lingual surface showed similar absorbance patterns as control group. 4. The specimens which were reduced up to 1.0mm thickness and lined with FUJI IONOMER TYPE II and LINING CEMENT showed the comparable absorbance patterns to the control group. 5. In case of HY-BOND application after 1.5mm reduction were observed the similar absorbance pattern as compared with control group. 6. When Dycal, CLEARFIL and Crown Bridge & Inlay Cement were applied to cut teeth surfaces, there were much differences of absorbance between control groups and experimental groups.

• 박물관보존과학
• /
• 제17권
• /
• pp.101-116
• /
• 2016

기존의 석고복원재로 복원한 문화재는 대기 중의 수분을 반복하여 흡·방출하면서 물성이 약화되어 형태가 변형되고 채색층 박락이 진행된다. 본 논문에서는 이러한 단점을 보완하기 위해 일반석고보다 더 강한 초경석고를 실험대상으로 두었으며 메타카올린(Metakaolin)을 혼합하여 도자기 복원재료로 적합하도록 물성을 개선하였다. 초경석고와 메타카올린 혼합재료의 압축강도(119MPa)는 일반석고(26MPa)보다 월등히 높았으며, 마모율(0.88％)은 일반석고의 마모율 2.53％ 보다 낮게, 흡수율(2.9％)은 일반석고(17.2％) 보다 약 5배 낮게 측정되었다. 특히, 주사전자현미경 관찰결과 혼합재료의 경화치밀도가 단미의 초경석고보다 높았다. 즉, 메타카올린을 첨가함으로써 초경석고의 강도와 수분저항성을 높이고 표면을 치밀하게 하여 도자기 복원재료로서 적합하게 물성을 개선시켰다. 그리고 이 혼합재료를 실재 문화재인 토제수반(신안18892), 분청사기조화문병(접수2034), 분청사기 국문내인화문대접(접수1730)의 결손부 복원에 적용해봄으로써, 혼합재료가 주입 및 적층성형에 유리하고 경화표면이 균질하여 자연스러운 채색이 가능한 재료임을 확인하였다.