• 제목/요약/키워드: Color characterization

검색결과 365건 처리시간 0.032초

ERROR ANALYSIS FOR GOCI RADIOMETRIC CALIBRATION

  • Kang, Gm-Sil;Youn, Heong-Sik
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.187-190
    • /
    • 2007
  • The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. The GOCI has been designed to provide multi-spectral data to detect, monitor, quantify, and predict short term changes of coastal ocean environment for marine science research and application purpose. The target area of GOCI observation covers sea area around the Korean Peninsula. Based on the nonlinear radiometric model, the GOCI calibration method has been derived. The nonlinear radiometric model for GOCI will be validated through ground test. The GOCI radiometric calibration is based on on-board calibration devices; solar diffuser, DAMD (Diffuser Aging Monitoring Device). In this paper, the GOCI radiometric error propagation is analyzed. The radiometric model error due to the dark current nonlinearity is analyzed as a systematic error. Also the offset correction error due to gain/offset instability is considered. The radiometric accuracy depends mainly on the ground characterization accuracies of solar diffuser and DAMD.

  • PDF

Spatial and Temporal Characteristics of LG StudioWorks 500LC (Flat Panel LCD)

  • Park, Seung-Ok;Kim, Hong-Suk;Lim, Yong-Jin;Yang, Jae-Youl
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
    • /
    • pp.165-166
    • /
    • 2000
  • Spatial independence and temporal stability of flat-panel LCD monitor, LG StudioWorks 500LC, were evaluated. The luminance and chromaticity of stimulus color were measured according to the variation of the size, background color, and location on the screen. The spatial independence at center location is very good and not a limiting factor in its colorimetric characterization, however the spatial non-uniformity is a little severe. The warmup time to stabilize after initial power is about 100 minutes and short-term variance of white stimulus is within 0.1 ${\Delta}E^*\;_{ab}$.

  • PDF

Characterization of Cinnamaldehyde-Supplemented Soy Protein Isolate Films

  • Kim, Ki-Myong;Hanna, Milford A.;Weller, Curtis L.;Cho, Sung-Hwan;Choi, Sung-Gil
    • Food Science and Biotechnology
    • /
    • 제15권4호
    • /
    • pp.631-634
    • /
    • 2006
  • Soy protein isolate (SPI) films were supplemented with cinnamaldehyde (CA) at concentrations of 0.1-0.5 mL/5 g SPI. The effects of CA on film color, tensile strength (TS), percent elongation at break (E, %) and water vapor permeability (WVP) of SPI films were investigated. Generally, total color difference (${\Delta}E$), WVP, and TS of SPI films increased gradually, while E and TSM decreased significantly (p<0.05) as the amount of cinnamaldehyde in the SPI films increased. Cinnamaldehyde can be used as a potential cross-linking agent for preparing SPI films by improving mechanical strength and water resistant properties.

암석에 대한 라이다 반사강도의 영향 인자 분석 (Analysis of Parameters Affecting LiDAR Intensity on Rock)

  • 김문주;이수득;전석원
    • 터널과지하공간
    • /
    • 제30권4호
    • /
    • pp.417-431
    • /
    • 2020
  • 이 연구에서는 라이다(LiDAR) 반사강도를 이용하여 암반 풍화도 및 변질도를 산정하는 작업의 기초연구를 진행하였다. 실내 시험을 통하여 라이다 반사강도에 직접적으로 영향을 미치는 인자와 그 영향 정도를 정량적으로 고찰하고자 하였다. 영향 인자로는 주사거리, 입사각, 표면거칠기, 표면색상, 암석물성, 광물조성, 포화도를 선정하였다. 실험에서는 FARO 라이다 장비와 12가지 종류의 시험편을 사용하였다. 실험 결과 반사강도는 표면색상, 입사각, 주사거리, 암석물성, 포화도 혹은 표면습윤상태, 표면거칠기 순으로 영향을 크게 미치는 것으로 나타났다.

Inheritance of Apiculus Color, Awn, and Long Empty Glume in Korean Rice Collection

  • Kang, Hee-Kyoung
    • Plant Resources
    • /
    • 제6권2호
    • /
    • pp.98-101
    • /
    • 2003
  • Colored apiculus, awn, and long empty glume are indicators of wildness and are usually eliminated during rice domestication. Genetic analysis was conducted to clarify the inheritance patterns of awn, apiculus color, and long empty glume in Korean rice collection. Based on individual characterization of F$_2$ progenies derived from crosses between parents with colorless and purple apiculus, two (3 colored: 1 colorless) or three dominant genes (9 purple: 3 red: 4 colorless) are estimated as controlling this character by simultaneous complementary action. Different inheritance systems were detected between S237 and S245 of 'Shareibyeo' which belong to the weedy type. To determine the genes responsible in awning and long empty glume characters, the inheritance of landrace varieties of rice ('Naengdo' and 'Yuna') was investigated. In the crosses of awned land race and awnless cultivar, three dominant genes are supposed to control the awning genetic system by 63 awned: 1 awnless individual. As for long empty glume, one recessive gene, g-l on the chromosome 4, was the one controlling the segregation ratio of 3 normal empty: 1 long empty glume. By analyzing the Korean rice collection, the inheritance systems of these wild characters may lead to a better understanding of rice domestication in the future.

  • PDF

다중회귀분석법을 이용한 스튜디오형 디지털 카메라 칼라 보정 (Studio Digital Camera Characterization by Using Multiple Regression analysis Method)

  • 윤창락;조맹섭
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (2)
    • /
    • pp.395-397
    • /
    • 1999
  • 디지털 카메라에 의해 획득된 RGB 칼라 신호는 디지털 카메라의 하드웨어적인 특성에 따라 서로 다른 값을 가지는 장비 의존적(Device Dependent) 특성을 가지며, 칼라 운영 시스템(CMS; Color Management System)이 프로파일 연결 칼라 공간(PCS:Profile Connection Space)으로 사용하는 CIE XYZ 칼라 공간에 대해 비선형적인 특성을 가진다. 본 논문에서는 디지털 카메라의 RGB 칼라 신호를 장비 독립적(Device Independent)인 CIE XYZ 칼라 공간으로 변환하는 변환 행렬을 구하는 방법을 제안한다. 변환 행렬은 비선형 다항식을 이용하여 3$\times$m의 변환 행렬을 구하고, 실험에 사용되는 칼라 샘플의 수에 따른 일반화(Generalization) 성능을 평가한다.

  • PDF

Electro-optical Characterization of OLED Device

  • Lee Soon-Seok;Kim Ki-Seok;Lim Sung-Kyoo
    • International Journal of Contents
    • /
    • 제2권3호
    • /
    • pp.6-10
    • /
    • 2006
  • Small molecule OLED devices were fabricated and the electro-optical characteristics were analyzed. The luminance and color coordinate of the fabricated OLED device were $24,390cd/m^2$ and (x=0.15, y=0.22), respectively. Current efficiency of 6.8 cd/A and power efficiency of 2.4 lm/W were also obtained under DC operating condition. Transient light intensity was also measured by using Si photodiode.

  • PDF

Synthesis and Characterization of Poly[9,10-diphenylanthracene-4$^\prime$, 4$^\prime^\prime$-ylenevinylene-3,6-(N-2-ethylhexyl)carbazole]

  • 김윤미;박기민;권순기
    • Bulletin of the Korean Chemical Society
    • /
    • 제22권9호
    • /
    • pp.975-978
    • /
    • 2001
  • A novel poly[9,10-diphenylanthracene-4',4"-ylenevinylene-3,6-(N-2-ethyl hexyl)carbazole] containing alternate diphenylanthracene and carbazole unit was synthesized by the Wittig reaction. The obtained polymer was soluble in common organic solvents and thermally stable up to 380 $^{\circ}C.$ The polymer gives rise to bright blue fluorescence both in solution and in thin solid films. The light emitted from the device (ITO/polymer/Al) was greenish-blue in color and clearly visible in daylight.

도재수복물의 표면첨색시 온도에 따른 색조안정성과 표면조도의 평가 (COLOR STABILITY AND SURFACE TEXTURE TO TEMPERATURE AT STASHING OF PORCELAIN RESTORATION)

  • 백은주;배태성;송광엽;박찬운
    • 대한치과보철학회지
    • /
    • 제29권3호
    • /
    • pp.87-99
    • /
    • 1991
  • The effect of oven firing on the color stability and surface texture of extrinsic stains used characterization and color modification of metal cermic restoration were studied by comparing different temperatures and techniques. They were autoglaze technique, applied glaze technique, two step low-fusing glaze technique and one step low-fusing glaze technique. Autoglaze technique and applied glaze technique were air-fired to manufacturer's recommended temperature. Two step low-fusing glaze technique is separated staining and overglazing. Thin slurry of stain powder were air-fired to $1500^{\circ}F$, Overglaze powder powder was then mixed with seam medium and air-fired to $170^{\circ}F$. One step low-fusing glaze technique is combined staining and overglazing. Thin slurry of stain and glaze powder were air-fired to $170^{\circ}F$. The obtained results were as fellows. 1. Slightly significant color differences by colorimeter were found between different stain application and fusion techniques(P<0.05). 2. Two step low-fusing glaze method showed the most rough surface, especially ceramco orage stain(P<0.05). 3. Surface roughness increased gradually in order of autoglaze, applied glaze, one step low-fusing glaze but they were not significantly different(P<0.05). 4. When two step low-fusing glaze was applied, both color measurement and surface texture were sinificantly different from other groups(P<0.05).

  • PDF