• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.187-190
• /
• 2007

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. The GOCI has been designed to provide multi-spectral data to detect, monitor, quantify, and predict short term changes of coastal ocean environment for marine science research and application purpose. The target area of GOCI observation covers sea area around the Korean Peninsula. Based on the nonlinear radiometric model, the GOCI calibration method has been derived. The nonlinear radiometric model for GOCI will be validated through ground test. The GOCI radiometric calibration is based on on-board calibration devices; solar diffuser, DAMD (Diffuser Aging Monitoring Device). In this paper, the GOCI radiometric error propagation is analyzed. The radiometric model error due to the dark current nonlinearity is analyzed as a systematic error. Also the offset correction error due to gain/offset instability is considered. The radiometric accuracy depends mainly on the ground characterization accuracies of solar diffuser and DAMD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.165-166
• /
• 2000

Spatial independence and temporal stability of flat-panel LCD monitor, LG StudioWorks 500LC, were evaluated. The luminance and chromaticity of stimulus color were measured according to the variation of the size, background color, and location on the screen. The spatial independence at center location is very good and not a limiting factor in its colorimetric characterization, however the spatial non-uniformity is a little severe. The warmup time to stabilize after initial power is about 100 minutes and short-term variance of white stimulus is within 0.1 ${\Delta}E^*\;_{ab}$.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.631-634
• /
• 2006

Soy protein isolate (SPI) films were supplemented with cinnamaldehyde (CA) at concentrations of 0.1-0.5 mL/5 g SPI. The effects of CA on film color, tensile strength (TS), percent elongation at break (E, %) and water vapor permeability (WVP) of SPI films were investigated. Generally, total color difference (${\Delta}E$), WVP, and TS of SPI films increased gradually, while E and TSM decreased significantly (p<0.05) as the amount of cinnamaldehyde in the SPI films increased. Cinnamaldehyde can be used as a potential cross-linking agent for preparing SPI films by improving mechanical strength and water resistant properties.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.417-431
• /
• 2020

In this study, a fundamental investigation was made on how to use LiDAR technology to determine the degree of weathering and alteration of rock mass. The purpose of the study was to identify the affecting parameters to LiDAR intensity and to quantitatively assess the relations among them through laboratory-scale experiment. A few potential affecting parameters were selected including scanning distance, incidence angle, surface roughness, surface color, mineral composition, and water saturation. In the experiment, FARO LiDAR unit was used for twelve different types of specimen. It was observed that the intensity was affected by, in the order of importance, surface color, incidence angle, scanning distance, property of rock, water condition, and surface roughness.

• Plant Resources
• /
• v.6 no.2
• /
• pp.98-101
• /
• 2003

Colored apiculus, awn, and long empty glume are indicators of wildness and are usually eliminated during rice domestication. Genetic analysis was conducted to clarify the inheritance patterns of awn, apiculus color, and long empty glume in Korean rice collection. Based on individual characterization of F$_2$ progenies derived from crosses between parents with colorless and purple apiculus, two (3 colored: 1 colorless) or three dominant genes (9 purple: 3 red: 4 colorless) are estimated as controlling this character by simultaneous complementary action. Different inheritance systems were detected between S237 and S245 of 'Shareibyeo' which belong to the weedy type. To determine the genes responsible in awning and long empty glume characters, the inheritance of landrace varieties of rice ('Naengdo' and 'Yuna') was investigated. In the crosses of awned land race and awnless cultivar, three dominant genes are supposed to control the awning genetic system by 63 awned: 1 awnless individual. As for long empty glume, one recessive gene, g-l on the chromosome 4, was the one controlling the segregation ratio of 3 normal empty: 1 long empty glume. By analyzing the Korean rice collection, the inheritance systems of these wild characters may lead to a better understanding of rice domestication in the future.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.395-397
• /
• 1999

디지털 카메라에 의해 획득된 RGB 칼라 신호는 디지털 카메라의 하드웨어적인 특성에 따라 서로 다른 값을 가지는 장비 의존적(Device Dependent) 특성을 가지며, 칼라 운영 시스템(CMS; Color Management System)이 프로파일 연결 칼라 공간(PCS:Profile Connection Space)으로 사용하는 CIE XYZ 칼라 공간에 대해 비선형적인 특성을 가진다. 본 논문에서는 디지털 카메라의 RGB 칼라 신호를 장비 독립적(Device Independent)인 CIE XYZ 칼라 공간으로 변환하는 변환 행렬을 구하는 방법을 제안한다. 변환 행렬은 비선형 다항식을 이용하여 3$\times$m의 변환 행렬을 구하고, 실험에 사용되는 칼라 샘플의 수에 따른 일반화(Generalization) 성능을 평가한다.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.930-934
• /
• 1998

The modified poly(ethylene terephthalate) (PET) was synthesized by copolymerizing dimethyl terephthalate with ethylene glycol, polyethyleneglycol, and dodecylbenzene sulfonate as a surfactant. After characterization of viscosity, color, and contant angle, hydrophilic characteristics of the modified PET depending on additives was discussed.

• International Journal of Contents
• /
• v.2 no.3
• /
• pp.6-10
• /
• 2006

Small molecule OLED devices were fabricated and the electro-optical characteristics were analyzed. The luminance and color coordinate of the fabricated OLED device were $24,390cd/m^2$ and (x=0.15, y=0.22), respectively. Current efficiency of 6.8 cd/A and power efficiency of 2.4 lm/W were also obtained under DC operating condition. Transient light intensity was also measured by using Si photodiode.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.975-978
• /
• 2001

A novel poly[9,10-diphenylanthracene-4',4"-ylenevinylene-3,6-(N-2-ethyl hexyl)carbazole] containing alternate diphenylanthracene and carbazole unit was synthesized by the Wittig reaction. The obtained polymer was soluble in common organic solvents and thermally stable up to 380 $^{\circ}C.$ The polymer gives rise to bright blue fluorescence both in solution and in thin solid films. The light emitted from the device (ITO/polymer/Al) was greenish-blue in color and clearly visible in daylight.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.87-99
• /
• 1991

The effect of oven firing on the color stability and surface texture of extrinsic stains used characterization and color modification of metal cermic restoration were studied by comparing different temperatures and techniques. They were autoglaze technique, applied glaze technique, two step low-fusing glaze technique and one step low-fusing glaze technique. Autoglaze technique and applied glaze technique were air-fired to manufacturer's recommended temperature. Two step low-fusing glaze technique is separated staining and overglazing. Thin slurry of stain powder were air-fired to $1500^{\circ}F$, Overglaze powder powder was then mixed with seam medium and air-fired to $170^{\circ}F$. One step low-fusing glaze technique is combined staining and overglazing. Thin slurry of stain and glaze powder were air-fired to $170^{\circ}F$. The obtained results were as fellows. 1. Slightly significant color differences by colorimeter were found between different stain application and fusion techniques(P<0.05). 2. Two step low-fusing glaze method showed the most rough surface, especially ceramco orage stain(P<0.05). 3. Surface roughness increased gradually in order of autoglaze, applied glaze, one step low-fusing glaze but they were not significantly different(P<0.05). 4. When two step low-fusing glaze was applied, both color measurement and surface texture were sinificantly different from other groups(P<0.05).