• 제목/요약/키워드: Color and material

검색결과 1,948건 처리시간 0.035초

새누리 벼 품종 배경 lipoxygenase-3 결핍 자포니카 근동질계통 개발 (Development of Near-Isogenic Line of japonica Rice Cultivar Saenuri without Lipoxygenase-3)

  • 박현수;이건미;김기영;김정주;신운철;백만기;김춘송;박슬기;이창민;서정필;조영찬
    • 한국육종학회지
    • /
    • 제51권3호
    • /
    • pp.190-200
    • /
    • 2019
  • 벼의 Lipoxygenase-3 (LOX-3) 결핍은 벼의 저장 후 고미취 발생 저감에 효과가 있는 것으로 보고되었다. 우리나라 밥쌀용 품종의 저장 후 품질 향상을 위해 대면적 재배품종인 새누리 유전배경에 LOX-3가 결핍된 자포니카 근동질계통 개발을 위한 육종사업이 수행되었다. 1차 육종단계에서는 다우담을 LOX-3 결핍 수여친으로 활용하여 신동진과 1회 여교배 후 발색반응을 통해 LOX-3 결핍 계통을 선발하였고 약배양을 통해 조기에 고정계통 HR27873-AC12를 육성하였다. 2차 육종단계에서는 HR27873-AC12를 LOX-3 수여친으로 하고 새누리를 반복친으로 하여 1회 여교배 후 분자표지 선발과 농업형질에 대한 표현형 선발을 통해 HR28896-31-3-1-1 (이하 HR28896)를 선발하였다. 1, 2차 단계에서 육성된 HR27873-AC12와 HR28896 계통은 LOX-3가 결핍되어 있으나 재배품종으로 활용하기에는 열악형질이 수반되어 있었다. 3차 육종단계에서 HR28896계통과 새누리를 다시 교배하여 분자표지 선발과 표현형에 대한 강한 선발압을 적용하여 최종적으로 BC2F7세대 HR30960-186-2-1-2-1를 선발하여 전주624호로 계통명을 부여하였다. 분자표지 검정 결과 전주624호는 LOX-3가 결핍된 것으로 확인되었다. 전주624호는 중만생종으로 단간 내도복 직립초형에 벼흰잎마름병 및 줄무늬잎마름병에 저항성 계통으로 새누리와 농업형질 특성이 비슷하였다. 전주624호의 수량구성요소는 새누리와 대부분 같았으나 현미 천립중이 유의하게 감소하였고 수량성은 다소 낮았다. 전주624호의 외관품위는 새누리에 비해 좋았고 식미 특성은 비슷하였다. 406개 KASP 마커를 이용한 유전배경 분석 결과 전주624호는 새누리의 유전배경을 95.8% 회복하여 근동질계통으로 판단되었다. 전주624호는 새누리 품종 배경의 LOX-3가 결핍된 자포니카 근동질계통으로 최초 수여친인 다우담의 열약 형질 수반문제를 극복하였으며 새누리와 비슷한 농업형질 특성과 유전배경을 가지고 있어 저장 후 품질 향상을 위한 실용적인 재배품종, lox-3 도입을 위한 교배모본 및 유전자 효과 구명을 위한 유전재료로 활용될 것으로 기대된다.

천마총 출토 철부(鐵釜)의 제작기법 및 보존처리 (Study on the Manufacturing techniques & Conservation of Iron Pot from Cheonmachong Ancient Tomb)

  • 이승렬;신용비;정원섭
    • 보존과학회지
    • /
    • 제30권3호
    • /
    • pp.263-275
    • /
    • 2014
  • 천마총(황남동 제 155호 고분)에서 출토된 철부(鐵釜)의 제작기법 및 보존처리에 대하여 연구하고자 하였다. 철부의 제작기법을 조사하기 위하여 유물 중 일부를 채취하여 마운팅 후 연마하고, etching을 실시하여 금속조직을 관찰하였고, 비금속개재물부분은 SEM-EDS로 분석을 실시하였다. 금속학적 조직검사와 SEM-EDS분석 결과 철 솥은 백주철 조직이 관찰되었고, 주조 후 상온에서 서서히 건조시킨 것으로 보이며, 취성을 개선하기 위해 별다른 열처리를 시도한 흔적은 보이지 않는다. 몸통 중심부의 폭3cm 두께 1.5cm 전이 확인됨에 따라서 가로식 거푸집을 활용한 이분제작기법을 사용하여 주조한 것으로 추정된다. 이처럼 백주철 조직과 가로식 거푸집을 활용한 제작기법은 비슷한 시기인 식리총과 황남대총에서 출토 된 철 솥에서도 나타나는 것으로, 당시 주조품의 생산기술이 동일하였음을 알 수 있었다. 보존처리는 크게 처리전조사, 이물질제거, 탈염처리, 강화처리, 접합 복원, 색맞춤의 순서로 진행하였으며, 처리과정 중 필요에 따라 세척 및 건조를 실시하였다. 강화처리는 유물의 크기로 인하여 진공함침에 어려움이 있었으므로, 저농도의 Paraloid NAD-10을 2-3차례 붓으로 도포하였고, 보존처리가 완료된 후 15wt.% Paraloid NAD-10용액으로 표면을 재강화하였다. 파손부위의 복원은 섬유강화플라스틱 수지(POLYCOAT FH-245,몰드 적층용)를 사용하여 파손 부위와 유사한 형태의 모형을 만든 후 접합하여 복원하였다. 이번 연구를 통하여 철제유물의 보존처리뿐만 아니라 5-6세기 주조 철솥의 제작기법에 대한 자료를 축적함으로 향후 보다 나은 연구를 위한 발판으로 활용되었으면 한다.

한국인의 상하악 전치부 색조에 관한 연구 (A Study of the shade of between maxillary and mandibular anterior teeth in the Korean)

  • 김태진;권긍록;김형섭;우이형
    • 대한치과보철학회지
    • /
    • 제46권4호
    • /
    • pp.343-350
    • /
    • 2008
  • 연구목적: 본 연구에서는 한국인의 상하악 전치부간의 색조차이를 상하악 치아 순면의 정중부의 색조를 분광측색장치 (Spectrophotometer)를 이용하여 CIE $L^{*}a^{*}b^{*}$ 색체계로 비교분석을 하여, 실제 한국인의 상하악 전치부간의 색조차이에 관하여 알아보고 자 하였다. 연구대상 및 방법: 수복물이 없으며 치주적으로 건강한 정상적인 치관부의 형태의 상하악 12전치를 가진 20대, 30대, 40대, 50대 이상 10명씩 남녀 각 40명씩 총80명을 대상으로 색조 측정을 시행하였다. 연구재료: $SpectroShade^{TM}$ MICRO (MHT S.p.A., Italy) 디지털 색조 분석 기구로서 대상 치아의 디지털 영상을 채득하여 이를 기계 내에 포함된 색조 분석시스템을 통해 shade map의 형태로 입력 분석하여 주는 장치이다. 결론: 1. 전치부 상, 하악 치아간 색조차이는 중절치, 측절치, 견치 모두에서 ${\Delta}E^{*}$가 보다 큰 것으로 나타났다. 2. 상, 하악 견치 간 색조차이는 중절치, 측절치 간의 색조차이보다 더 두드러지고 중절치간 측절치간 색조차이 정도는 유사한 것으로 나타났다. 3. 남녀 성별에 따른 상, 하악 치아 간의 색조차이는 그 정도가 유사한 것으로 나타났다. 4. 각 연령대에 따른 상, 하악 치아간 색조차이의 정도는 연령대와 상관없이 유사한 것으로 나타났다.

중국 소수민족의 복식 연구(1) (The costume culture of China is as old and varied as her long history)

  • 박춘순
    • 복식
    • /
    • 제26권
    • /
    • pp.175-206
    • /
    • 1995
  • The costume culture of China is as old and varied as her long history. As China is a multiracial nation and consists of fifty-six min-ority races including Han race, there are not only fifty-six different costumes in China but each races' costume habit is very different. Therefore, Chinese penninsula can be considered an enor-mous exhibition center of the costumes. This study undertook on the assumption that the costumes' mainstream of Korea and east-northern Asia as well as that of China could be examined by investigating the minority races' costumes in the east-and west-northern areas of China. The process of evolution of the costume of a particular people, country or area is subject not only to constraints related to geography such as climate, topography or local products but is also affected by numorous environmental influences including cultural, economic, social and even pol-itical ones in terms of the selection of material, styling, color and standard of tailoring. In other words, things like philosophy of life, religious be-lief, aesthetic outlook, moral code, class system, degree of affluence, and cultural exchange will all be reflected directly or indirectly by features of a people's or country's style costume. Of course, there are several factors affecting to the style of costume of the minority people in China. However, the only three factors-geo-graphical and environmental, production method, and religious belef-will be touched in this study. First of all, the geograghical and eenviron-mental factor would be the decisive one because the costume should be designed to overcome the constraints of climate and geographical environ-ments. Accordingly, each race has an unique style of costume. The costume of the minority races in the northern parts are loose and wide, and made of warm furs. For instance, Mongolian robe has the quality of anti-wind, anti-cold and warmness, and the width of a sleeve is narrow and long. Secondly, the costume style can be said to be limited by the production pattern, when the geo-graphical environment was affected to decide the costume style, the production pattern was together affected to it . In case of Mongolian robe, they should satisfy the dual condition as the practical function. One is the condition that they should be fitted to the climate, and the other is the condition that they should be suit-able to the nomadic life. Mongolian robes are suitable to the nomadic peoples because they are designed for not only overcoming the cold wind and weather but being used as the bedquit at night. The costumes of Hoche people was made of the skin of the fish and wild animals because of their main means of living being fishing and hunting. Accordingly, their costumes are dur-able, warm and water-proof. Finally, the style of the costume is affected by the religious belief. In other words, the pattern in fashion is closely related with the religious be-lief or ancestor worship and nature worship. Ac-cordingly, the symbols of these worship are often emerged in the decoration of the costume. The design of costume of the people in the northern areas of China is very simple. It is related with their monotheism. On the other hand, the costumes of twen쇼 minority races in the east-northern parts of China can be devided into three racial groups such as the long robes of Man people and Mongols, Tunics of the peoples in the west-northern areas, and the pants and jackets of Hoche people. The minorority races all has not only the unique costume habit but their costumes are also related with their living style and production means.

  • PDF

Modern Paper Quality Control

  • Olavi Komppa
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2000년도 제26회 펄프종이기술 국제세미나
    • /
    • pp.16-23
    • /
    • 2000
  • The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

부식 환경에 따른 출토 청동 유물의 부식 특성 (Corrosion Characteristics of Excavated Bronze Artifacts According to Corrosion Environment)

  • 장준혁;배고운;정광용
    • 헤리티지:역사와 과학
    • /
    • 제53권1호
    • /
    • pp.24-33
    • /
    • 2020
  • 출토 청동 유물에서는 매장 환경 내 공존하는 복합적인 부식 인자로 인해 다양한 형태와 색상의 부식 생성물이 관찰되며, 이러한 부식 생성물은 장기 부식의 정보뿐만 아니라 보존처리 시 중요한 자료가 될 수 있다. 따라서 청동 유물의 부식층 및 부식 생성물에 대한 과학적 분석을 실시하여 부식층 형성 과정 및 부식 생성물의 특성을 규명하고, 노출된 매장 환경의 특성 및 내부 부식 인자와의 연관성을 해석하는 연구가 필수적이다. 본 연구에서는 동일 유적에서 출토된 청동 유물을 합금비와 제작기법에 따라 분류 후, 표면·부식층·부식 생성물에 대한 종합적인 분석을 실시하여 청동 유물의 부식 메커니즘과 부식층 형성 과정, 부식 생성물의 특성에 대해 알아보고자 하였다. 분석 대상으로 선정된 총 5점의 시료는 합금비 및 제작기법 분석 결과에 따라 2개의 그룹으로 구분되는데, Cu-Sn-Pb합금으로 열처리가 진행되지 않은 Group 1은 내·외측 중 일부 또는 양측에 외부 부식층이 형성되어 있으며, 표면은 녹색 또는 청색으로 확인되었다. 소지 금속에서는 α상, α+δ상 선택 부식이 일어나는 것을 알 수 있었으며, α+δ상 선택 부식 후 빈 공간에 순도가 98% 이상인 Cu가 농축되어 있는 현상이 확인되었다. Cu-Sn합금으로 열처리가 진행된 Group 2는 외부 부식층이 형성되지 않았으며, 표면이 어두운 황색으로 관찰되었다. 또한 Group 1과는 다르게 소지 금속 내부에서 α상 선택 부식이 발생한 것을 확인하였다. 연구결과를 종합해 볼 때 동일한 유적에서 출토된 청동 유물에서도 합금비 및 제작기법에 따라 부식층 형성과정 및 부식 생성물의 형태와 색상, 금속이온 이동경로 등 여러 측면에서 차이를 나타냄을 알 수 있다. 또한 동일 유물에서도 부분적으로 서로 다른 부식 특성을 보이기도 하는데 이는 매장 환경 내 노출 환경에 따라 다른 형태의 부식이 발생할 수 있음을 뜻한다. 따라서 동일 유적에서 출토된 청동 유물이라 하더라도 합금비, 제작기법, 노출 환경에 따라 부식 특성이 다를 것이라고 판단된다. 본 연구는 특정 지역 및 유물을 대상으로 한 부식 특성의 일면을 보여주는 것이므로 향후 여러 지역에서 출토되는 청동 유물의 부식층 및 부식 생성물 특성에 대한 연구를 통해 매장 환경에 따른 부식 메커니즘에 대한 심층적인 연구가 필요할 것으로 판단된다.

쌀의 품질평가 현황과 금후 연구방향 (Trend and Further Research of Rice Quality Evaluation)

  • 손종록;김재현;이정일;윤영환;김제규;황흥구;문헌팔
    • 한국작물학회지
    • /
    • 제47권
    • /
    • pp.33-54
    • /
    • 2002
  • Rice quality is much dependent on the pre-and post harvest management. There are many parameters which influence rice or cooked rice qualitys such as cultivars, climate, soil, harvest time, drying, milling, storage, safety, nutritive value, taste, marketing, eating, cooking conditions, and each nations' food culture. Thus, vice evaluation might not be carried out by only some parameters. Physicochemical evaluation of rice deals with amy-lose content, gelatinizing property, and its relation with taste. The amylose content of good vice in Korea is defined at 17 to 20%. Other parameters considered are as follows; ratio of protein body-1 per total protein amount in relation to taste, and oleic/linoleic acid ratio in relation to storage safety. The rice higher Mg/K ratio is considered as high quality. The optimum value is over 1.5 to 1.6. It was reported that the contents of oligosaccharide, glutamic acid or its derivatives and its proportionalities have high corelation with the taste of rice. Major aromatic compounds in rice have been known as hexanal, acetone, pentanal, butanal, octanal, and heptanal. Recently, it was found that muco-polysaccharides are solubilized during cooking. Cooked rice surface is coated by the muco-polysaccharide. The muco-polysaccharide aye contributing to the consistency and collecting free amino acids and vitamins. Thus, these parameters might be regarded as important items for quality and taste evaluation of rice. Ingredients of rice related with the taste are not confined to the total rice grain. In the internal kernel, starch is main component but nitrogen and mineral compounds are localized at the external kernel. The ingredients related with taste are contained in 91 to 86% part of the outside kernel. For safety that is considered an important evaluation item of rice quality, each residual tolerance limit for agricultural chemicals must be adopted in our country. During drying, rice quality can decline by the reasons of high drying temperature, overdrying, and rapid drying. These result in cracked grain or decolored kernel. Intrinsic enzymes react partially during the rice storage. Because of these enzymes, starch, lipid, or protein can be slowly degraded, resulting in the decline of appearance quality, occurrence of aging aroma, and increased hardness of cooked rice. Milling conditions concerned with quality are paddy quality, milling method, and milling machines. To produce high quality rice, head rice must contain over three fourths of the normal rice kernels, and broken, damaged, colored, and immature kernels must be eliminated. In addition to milling equipment, color sorter and length grader must be installed for the production of such rice. Head rice was examined using the 45 brand rices circulating in Korea, Japan, America, Australia, and China. It was found that the head rice rate of brand rice in our country was approximately 57.4% and 80-86% in foreign countries. In order to develop a rice quality evaluation system, evaluation of technics must be further developed : more detailed measure of qualities, search for taste-related components, creation and grade classification of quality evaluation factors at each management stage of treatment after harvest, evaluation of rice as food material as well as for rice cooking, and method development for simple evaluation and establishment of equation for palatability. On policy concerns, the following must be conducted : development of price discrimination in conformity to rice cultivar and grade under the basis of quality evaluation method, fixation of head rice branding, and introduction of low temperature circulation.

에폭시 수지 모르터의 특성에 관한 실험적 연구 (Experimental Studies on the Properties of Epoxy Resin Mortars)

  • 연규석;강신업
    • 한국농공학회지
    • /
    • 제26권1호
    • /
    • pp.52-72
    • /
    • 1984
  • This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

  • PDF

조선 중기 제작된 지자총통의 보존처리와 제작기법 연구 -동아대학교 석당박물관 소장 보물 지자총통을 중심으로- (Conservation Treatment and Study on Manufacturing Techniques of Jija Chongtong Gun in the Middle of Joseon Dynasty)

  • 남도현;박영환;이재성
    • 박물관보존과학
    • /
    • 제30권
    • /
    • pp.23-46
    • /
    • 2023
  • 동아대학교 석당박물관 소장 지자총통은 조선 중기에 사용하던 전장유통식 중화기무기로 천자총통 다음으로 큰 화기류이다. 지자총통의 표면에는 표면 이물질들로 인해 고유의 색상이 가려져 있는 상태로, 보존처리가 필요한 상황으로 판단되었다. 안정적인 보존처리를 위해 감마선(γ선), X선 비파괴 투과조사, 내시경카메라 관찰을 실시하여 내부 구조와 보존상태를 파악하였고, p-XRF 성분분석, SEM-EDS 성분분석, XRD 분석 등을 활용하여 지자총통의 재질 성분과 표면 오염물 등에 관한 성분분석을 진행하였다. 휴대용현미경 관찰과 정밀 3D스캔으로 지자총통 표면 명문의 상태, 새김형태 등을 확인하였다. 감마선, X선 비파괴 투과조사 결과, 지자총통 내부에 다량의 기포가 관찰되었으며, 육안관찰로 확인되는 표면의 채플릿은 비파괴투과조사 결과로는 확인되지 않았다. p-XRF 성분분석 결과 지자총통은 구리(Cu), 주석(Sn), 납(Pb) 합금으로 만들어진 청동으로 확인되었으며, SEM-EDS를 활용한 표면 이물질 성분분석 결과, 백색이물질은 칼슘(Ca), 황(S), 티타늄(Ti)이 주성분으로 확인되었다. 티타늄은 백색수정액의 주성분인 이산화티타늄(TiO2)으로 추정되었으며, 적색이물질은 바륨(Ba)이 주성분으로 확인되어 페인트의 체질안료인 황산바륨(BaSO4)으로 추정되었다. 티타늄과 바륨을 주성분으로 하는 백색과 적색 오염물은 근래에 이르러 표면에 묻은 것으로 추정된다. 황색이물질은 알루미늄(Al), 규소(Si)로 확인되어 토양성분에서 유래한 것으로 추정했다. 백색이물질의 XRD 성분분석결과 황화칼슘(CaS)으로 확인되었고, SEM-EDS와 XRD 성분분석결과로 백색이물질은 석고(CaS)로 확인하였다. 성분분석의 결과를 토대로 표면 이물질 제거, 안정화처리, 강화처리를 진행하였다. 보존처리를 진행하던 중에 휴대용 현미경과 정밀 3D스캔을 통해 알려지지 않았던 명문 우(右), 병(兵), 상(上), 이(二)를 발견하였다. 또한, 명문의 새김방법과 깊이, 너비 등을 측정하였다. 우병상(右兵上)은 창원 합포성 내 위쪽이며, 이(二)는 두 번째 돈대로 파악할 수 있다.

정조대 <서장대야조도(西將臺夜操圖)> 장용영(壯勇營) 하급 군사(軍士)의 군복(軍服) 고증 (Features of the Military Uniforms of the Low-Ranking Soldier Belonging to Jangyongyoung in the King Jeongjo Period Seojangdaeyajodo)

  • 이경희;김영선;이은주
    • 헤리티지:역사와 과학
    • /
    • 제54권4호
    • /
    • pp.90-111
    • /
    • 2021
  • 1795년 윤2월 12일 정조가 친림하여 행한 장용영 외영의 군사 훈련을 그린 <서장대야조도>를 중심으로 장용영 하급 군사들의 위치와 역할, 역할별 군복의 구성과 특징을 고찰하였으며 결과는 다음과 같다. <서장대야조도>에서 정조가 자리한 서장대 앞에 2열로 마주보도록 배치된 등롱군·뇌자·순령수·대기수와, 서장대를 둘러싸고 정조를 호위한 군사들은 모두 장용영 소속 하급 군사들이었다. 정조 앞에 배치된[御前前排] 등롱군의 군복은 전립, 흑색 협수, 홍색 괘자, 남색 전대, 백색 제비행전, 흑혜로 고증하였다. 하급 군사들의 협수는 기존 학계에 알려진 관직자들의 무가 있는 협수와는 달리 소창의형 협수일 가능성을 제시하였다. 등롱군은 칼을 차고 손에는 홍사촉롱을 들었다. 뇌자는 신전수와 주장수가 있었다. 왕 앞에 배치된 뇌자의 군복은 주전립, 흑색 협수, 홍색 괘자, 남색 전대, 백색 제비행전, 흑혜로 고증하였다. 뇌자는 칼을 차고 신전기 또는 주장을 들었다. 왕 앞에 배치된 순령수는 순시기수와 영기수가 있었다. 순령수의 군복은 전건, 흑색 협수, 홍색 괘자, 남색 전대, 백색 제비행전, 흑혜로 고증하였다. 순령수는 칼을 차고 홍순시기 또는 홍령기를 들었다. 왕 앞에 배치된 대기수의 군복은 전건, 흑색 협수, 청색 괘자, 남색 전대, 백색 제비행전, 흑혜로 고증하였다. 왕 앞에 배치되는 다른 군사들과 달리 대기수는 정조대에 와서야 왕 앞에 배치됨으로써 괘자의 색상이 청색인 점이 달랐다. 대기수는 칼을 차고 대기치를 들었다. 서장대를 둘러싼 군사들은 전초군과 좌초군이었고, 성곽을 방어하는 군사들은 좌·우·전·후 초군으로 보았다. 초군의 군복은 전립, 흑색 협수, 호의, 남색 전대, 백색 제비행전, 짚신으로 고증하였다. 호의는 방위에 따른 색을 사용하였기에 좌초군은 청색, 우초군은 백색, 전초군은 홍색, 후초군은 흑색이었다. 초군이 소지하는 무기는 조총과 칼이었다. 성정군들은 조총과 칼 외에도 훈련 상황에 따라 횃불이나 등이 달린 기창을 들기도 하였다. 이상의 고증 결과를 반영한 시각화의 기본 원칙은 3D 콘텐츠 제작뿐만 아니라 실물 제작까지 가능하도록 시대와 신분에 적합한 형태·색상·재질 기준을 제안하였다. 역할별 복식 착장도에 무기와 군기(軍器)를 갖춘 앞·옆·뒤 모습으로 표현하고 색상을 RGB와 CMYK로 제안하였다.