• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.432-436
• /
• 2009

Purpose: Negative pressure therapy has been used in various conditions to promote wound healing. It has also been used to secure a skin graft by improving microcirculation and improving tight adhesion between the graft and the recipient bed. To reduce post burn scar contracture and improve aesthetical result, many types of dermal substitutes have been invented and used widely. The goal of this study was evaluate usefulness of the VAC (Kinetic concepts Inc., San Antonio, TX) in improving the take rate and time to incorporation of Integra$^{(R)}$ in reconstruction of burn scar contracture. Methods: A retrospective study was performed from October, 2006 to December, 2008. The VAC was utilized for 11 patients. The average patient's age was 19.7 years (range 5 - 27) and average surface area was $785cm^2$ (range 24 - 1600). The burn scars were excised deep into normal subcutaneous tissue to achieve complete release of the scar, Integra$^{(R)}$ was sutured in place with skin staple와 Steri - strip$^{(R)}$. Then slit incisions were made on silicone sheet only with No.11 blade for effective drainage. The VAC was used as a bolster dressing over Integra$^{(R)}$. Negative - Pressure ranging from 100 to 125 mm Hg was applied to black polyurethane foam sponge trimmed to the appropriate wound size. An occlusive seal over the black polyurethane foam sponge was maintained by a combination of the occlusive dressing, OP - site$^{(R)}$. The VAC dressing changes were performed every 3 or 4 days until adequate incorporation was obtained. The neodermis appeared slightly yellow to orange color. When the Integra$^{(R)}$ deemed clinically incorporated, The VAC was removed and take was estimated with visual inspection. Very thin STSG(0.006 ~ 0.008 inches) was performed after silicone sheet removal. Result: The mean time for clinically assessed incorporation of Integra$^{(R)}$ was 10.00 days (range 9 - 12). The mean dressing change was 3.5 times until take was obtained. In All patients, Integra$^{(R)}$ had successful incorporation in tissue without serious complications. Conclusion: Integra$^{(R)}$ in combination with Vacuum - Assisted Closure(VAC) may be incorporated earlier than conventional dressing method.

• Journal of Life Science
• /
• v.19 no.12
• /
• pp.1847-1850
• /
• 2009

Bovine tuberculosis is generally detected postmortem because it is a chronic debilitating disease. Since tuberculosis is mainly found in the lungs, clinical signs including coughing, nasal discharge, and difficulty breathing can occur in severe instances. In the present study, specimens were collected from the heart, liver, kidney, lung, pleural cavities, lymph nodes and intestines of carcasses found in an abattoir. According to post-mortem examination and inspection of carcasses, tuberculosis lesions were varied in appearance and size. Tubercles of a white cream color were disseminated throughout the pleural cavity including the lymph nodes, lungs and mesentery containing pus. Gram and Ziehl-Neelsen's acid-fast staining for the lung and lymph nodes revealed a highly positive histochemical reaction. The acid-fast organisms were observed histologically in the lesions under a microscope. This report demonstrated the histopathology of bovine tuberculosis based on the histological findings of Mycobacterium bovis, which is a suspected causative agent.

• Food Science of Animal Resources
• /
• v.24 no.2
• /
• pp.115-120
• /
• 2004

This study was carried out to investigate the effect of the scalding temperature at slaughtering process on meat quality and storage properties of chicken. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature (65-67$^{\circ}C$) and WHC (water holding capacity) increased from 67.04％ at low temperature (53-55$^{\circ}C$) to 69.26％ at high temperature. WBS (Warner-Bratzler Shear force) significantly increased from 1.70kg/0.5inch$^2$ to 2.54kg/0.5inch$^2$ as the scalding temperature increased (p＜0.05). TBARS (Thiobarbituric Acid-Reactive Substance) values were 0.25mgMA/kg at low temperature, 0.24mgMA/kg at middle temperature (59-61$^{\circ}C$) and 0.27mgMA/kg on 3 days of storage. Total aerobic counts (TPC) were 4.99 logCFU/mL at low temperature, 4.88 10gCFU/mL at middle temperature and 4.05 logCFU/mL. Although TPC was decreased as the scalding temperature increased. The detection rate of feather at carcass inspection was low as the scalding temperature increased and the detection rate of large feather (＞lcm) was not significantly different between middle temperature and high temperature. Exposed flesh was severe as the scalding temperature increased. In conclusion, meat color and physical properties of chicken were acceptable when the carcasses were scalded at low temperature, but they were microbiologically susceptible and uneasy to remove the feather. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature, and total aerobic counts (TPC) were decreased as the scalding temperature increased, and easy to remove the feather.

• Journal of The Korean Astronomical Society
• /
• v.47 no.5
• /
• pp.167-178
• /
• 2014

We search for misclassified type 1 AGNs among type 2 AGNs identified with emission line flux ratios, and investigate the properties of the sample. Using 4 113 local type 2 AGNs at 0.02 < z < 0.05 selected from Sloan Digital Sky Survey Data Release 7, we detected a broad component of the $H{\alpha}$ line with a Full-Width at Half-Maximum (FWHM) ranging from 1 700 to $19090km\;s^{-1}$ for 142 objects, based on the spectral decomposition and visual inspection. The fraction of the misclassified type 1 AGNs among type 2 AGN sample is ~3.5%, implying that a large number of missing type 1 AGN population may exist. The misclassified type 1 AGNs have relatively low luminosity with a mean broad $H{\alpha}$ luminosity, log $L_{H\alpha}=40.50{\pm}0.35\;erg\;s^{-1}$, while black hole mass of the sample is comparable to that of the local black hole population, with a mean black hole mass, log $M_{BH}=6.94{\pm}0.51\;M_{\odot}$. The mean Eddington ratio of the sample is log $L_{bol}/L_{Edd}=-2.00{\pm}0.40$, indicating that black hole activity is relatively weak, hence, AGN continuum is too weak to change the host galaxy color. We find that the O III lines show significant velocity offsets, presumably due to outflows in the narrow-line region, while the velocity offset of the narrow component of the $H{\alpha}$ line is not prominent, consistent with the ionized gas kinematics of general type 1 AGN population.

• Microbiology and Biotechnology Letters
• /
• v.40 no.1
• /
• pp.39-42
• /
• 2012

A new method for the high throughput screening of antagonistic substances against rice pathogens using rice leaf explants was developed. This method can be used to confirm the activities of any compound or mixture suppressing rice bacterial blight (BB) before field tests. Xanthomonas oryzae pv. oryzae (Xoo) culture medium was distributed in 96 well plates with equally sized explants and the active compounds were added to the wells. The strength suppressing BB was converted into an area percent of the lesion on the rice explants. The explants under BB suppressing activity remained uninfected maintaining their actual green color, while infected explants exhibited pale yellow-colored lesions. Based on the results, this method seems to be faster and easier, dose-dependent, and can be performed all-at-once with a small amount of unspecified compounds. This method also has the potential to be applied to inspection activities for the suppression of other waterborne crop diseases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4404-4410
• /
• 2010

The purpose of this study is to find out the optimal mixing ratios of three different amount of red ginseng powder(0, 5, 10%), water(12, 16, 20%) and sugar(4, 8, 12%) per weight of glutinous rice powder. The microbial count increased with increasing moisture content. The microbial count has decreased in 10% addition group though the microbial count according to the red ginseng powder addition did not have a difference the having mind in 5% addition group. Control group(the red ginseng powder no addition) showed an exponential increase in the change in hardness according to the amount of the red ginseng powder addition 24 hours after(except the moisture addition amount 20%). However, the change in devotion hardly appeared without the relation in moisture and the amount of the sugar addition in the addition group of the red ginseng powder 5%. Moreover, the change in hardness besides the moisture addition amount 12% hardly appeared also in the addition group of the red ginseng powder 10%. It has been understood that the red ginseng powder addition 5% crowd smells, and the taste and the color are suitable though it was clarified to the red ginseng powder addition 10% crowd that a peculiar smell taste and taste to the red ginseng are very strong by the sensory inspection. In conclusion, according to its microbial count, texture and sensory analyses, the optimal Injulmi formulation consisted of red ginseng powder, water and sugar were 5, 16 and 8%. The results suggested that red ginseng powder is effective in increasing the self life of Injulmi.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.115-126
• /
• 2014

In order to improvement of the perceptive of health state and the motivation, this study suggests the ways and design forms which provide PHR information customizing individual attributes as well as guidelines through a decision support system and services which integrate medical information visualization. Expression methods using the color, form, position in order to visualization based on images improved performance of information awareness by changing radar chart from existing information which provide only numerical figure. The methods providing a graphic figure which seems like beads of blood which shows the result of blood tests would also arise patient's attention. They gives the patient's information which is able to compare their health status and normal status and visualizes the records as a human figure in order to perceiving their status as well. The visualization showing the position of human body figures marks in inspection elements located in position of relevant organs. The method also uses icons represent examination results so they improve attention of the results and shorten recognize times.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.105-112
• /
• 2023

In this paper, we propose a new method for displaying colored defects by measuring the relative density with the wide-area and local densities of X-ray. The relative density of one pixel represents a relative difference from the surrounding pixels, and we also suggest a colorization of X-ray images representing these pixels as normal and defective. The traditional method mainly inspects materials such as plastics and metals, which have large differences in transmittance to the object. Our proposed method can be used to detect defects such as sprouts or holes in images obtained by an inspection machine that detects X-rays. In the experiment, the products that could not be seen with the naked eye were colored with pests or sprouts in a specific color so that they could be used in the agricultural product selection system. Products that are uniformly filled with a single ingredient inside, such as potatoes, carrots, and apples, can be detected effectively. However, it does not work well with bumpy products, such as peppers and paprika. The advantage of this method is that, unlike machine learning, it doesn't require large amounts of data. The proposed method could be applied to a screening system using X-rays and used not only in agricultural product screening systems but also in manufacturing processes such as processed food and parts manufacturing, so that it can be actively used to select defective products.

• Parasites, Hosts and Diseases
• /
• v.28 no.3
• /
• pp.183-194
• /
• 1990

In an attempt to develop prophylactic and therapeutic measures of the intestinal giant-cystic disease caused by Thelohanellus kitauei in the Israel carp, Cyprinus carpio nodus, pathological observations were conducted upon the carps which were hatched in May 1988 and raised in a net cage fish farm at the Soyang lake, managed by Horim Fisheries for the period of 21 months with 1~2 months interval. After a gross inspection of the carps, necropsy was carried out periodically in order to clarify the pathological changes in various internal organs and muscular tissues. Also. the prevalence of the disease was checked during the period from 1988 to 1990. Gross inspections revealed that the infected carps showed some degree of fading in body and gill color, back-emaciation symptoms, reddish anus accompanying erosion and relaxation and pot-belly, as well as discharge of yellowish white mucoid material from the anus. However, most carps died eventually of intestinal obstruction. Other significant necropsy fadings included cyst formation of various size in the intestinal mucosa, ascites, anemic condition through internal organs and muscular tissues, hyperemia and dilation of intestines with decreased tension, thinness and fragility, and full contents of semi-fluid or yellowish white mucoid material in the intestinal canals. Based on the morphological characteristics of the spores found in the cysts, parasitic location in the intestines, macro- and microscopic findings of the lesions, the parasites were identised as Thelohanellus kitauei Egusa os Nakajima, 1981. Although monthly changes of water temperature were distinct, the extrusion rates of the polar filaments of the spores stayed constant throughout the year with an exception of a lower rate in July, The lesions initiated from mucosa and submucosa in early July became large swellings and then complete mature (orms following the peracute course. From late August the upper cysts were gradually opened and most of the spores were dispersed from anus into the surrounding water through December but only a few lasted until next April. The cysts were completely recovered until next September. Comparing the incidence and prevalence of the disease by year tremendous infection and death rates were checked in the first prevalent year, 1988, but the rates were significantly decreased in the second year, and showed an almost normal status in the third year, 1990. As the above summarized results showed, the disease entity might come to an end in three years after the first prevalent year, however, the spores must be strictly prevented because they could be infective in the water for one year.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.