• Journal of the Korean Society of Costume
• /
• v.60 no.5
• /
• pp.88-105
• /
• 2010

The purpose of this study is to grasp the actual wearing conditions, inconvenience and problems with cycle wear. To attain this purpose, a questionnaire was completed by direct observation and by interviewing bicyclists. The questionnaire was given to 273 bicyclists. The questionnaire consisted of items that are related to concerns with dressing appropriately and enhancement of physical performance through dress. Following are the results of this study. According to the survey, many of them purchased imported cycle wear rather than national cycle wear, and the satisfaction according with purchase rate was low. Bicyclists were uneasy with finding right size cycle wear especially for women. It turned out that the area of the knee and elbow are mostly the areas that they get hurt while riding. Even though the knee and elbow are the mostly hurt area, bicyclists do not prefer to wear appropriate protector for the knee and elbow to excel in their performance in cycling. In material related questions, lower dissatisfaction was indicated for the lints caused by fraction. Average satisfaction was indicated for the distortion after washing, changes in color, touch of the fabric, matters with static and sweat. With regard to the areas where the bicyclists felt discomfort was highly indicated with lower-body clothing. Discomfort was highly indicated with crotch area when riding long period of time. Also when riding a cycle, discomfort was indicated with the leggings cuffs when it comes upward with riding motion. Most of the bicyclists felt the tight fitting leggings were embarrassing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.1
• /
• pp.77-87
• /
• 2008

Modern fashion industry creates complex and multiple fashion by amalgamating and mixing all elements that emerged in fashion without limiting them to a specific genre. The results of study are as follows: First, with regard to the conceptual differences among poor look, anti-fashion, and resistance fashion and the background. second, As aesthetic categories of poor beauty, its image with the feeling of poorness, beggar-likeness, worthlessness, poorness, and uncleanness is divided into the beauty of moderation, deconstruction, unfinished beauty, natural beauty, and ostentatious poor beauty based on the formative characteristics and poor look. Third, Oriental and Western poor images are comparatively analyzed. The poor beauty found in Oriental fashion, which is based on Zen aesthetics, seeks loneliness, poorness, and simplicity as an empty origin and features internal meaning that expresses the purity of poor beauty itself and external form that is visualized through no decoration, no color, and asymmetry in material and composition. The poor beauty in the West features non-form of no shape, asymmetry and disharmony and the characteristic in its contents is "distortion", and the characteristic in its expression features external form of "incorrectness" and internal meaning implying modem humans' frustration, resistance to materialism, and skepticism about mechanicalism.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.181-190
• /
• 2006

In the industry, three-dimensional coloring has been needed for a realistic prototype. The Z-corporation developed a 3D printer which provides a three-dimensional colored prototype. However, the process cannot be adopted to models fabricated by other rapid prototyping processes. In addition, time and cost for manufacturing colored prototypes still remain to be improved. In this study, a new coloring process using an ink-jet head is proposed for color printing on a three-dimensional surface. Process parameters such as the angle and the distance between the ink-jet nozzle and the three-dimensional surface should be investigated through experiments. In order to minimize the distortion of a 2D image, the correction matrix according to the sloped angle is proposed and obtained by analysis of printing errors. An image on the doubly curved surface is printed so as to verify the proposed method. As a practical example, a helmet is chosen for printing images on the curved surface. The practical applicability of the correction matrix is then demonstrated by printing the character images on the surface of the helmet.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.836-847
• /
• 2008

Maximalism in modern fashion has emerged as an anti-conception against Minimaslism which dominated the trend of 21st century. Contrary to the traits of Minimalism which are oriented to constraint and editing, Maximalism expresses human sensitivity, concern to tradition and other culture, and instinctive desire for decoration. The trend of Maximalism is reflected in various areas of fashion and shoes design, and its influence is still enlarging. This idea for designing shoes come from analyzing the related documentaries, fashion magazines and internet sites since 2005, when the maximalism was main concepts in worldwide fashion trends. The traits of Maxmalistic trend expressed in shoes are decentralizing, pluralisml, sensitivity, etc. The molding constituents, such as form, material, color, accessary decoration, have been expressed as diversified and differentiated traits of shoes design through molding modes such as exaggeration and concentration, distortion and modification, removal and mixing-up. This study takes advantage of this opportunity to grasp the diversified and colorful trend and molding traits of Maximalim expressed in shoes design, close up the molding value of shoes design, and finally enlarge the realm of aesthetic expression of shoes design.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.80-84
• /
• 2014

Dark channel prior means that, for undistorted outdoor images, at least one color channel of a pixel or its neighbors have values close to 0, and thus the prior can be used to estimate the amount of distortion for given distorted images. In other words, if an image is distorted by blur, its dark channel values are averaged with neighbor pixel values and thus increase. This paper proposes a method that estimates blur strengths by analyzing the variation of dark channel values caused by blur. Through experiments with images distorted by Gaussian and horizontal motion blur with given strengths, the usefulness of the proposed method is verified.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.176-192
• /
• 2014

The realization of Wireless Multimedia Sensor Networks (WMSNs) has been fostered by the availability of low cost and low power CMOS devices. However, the transmission of bulk video data requires adequate bandwidth, which cannot be promised by single path communication on an intrinsically low resourced sensor network. Moreover, the distortion or artifacts in the video data and the adherence to delay threshold adds to the challenge. In this paper, we propose a two stage Quality of Service (QoS) guaranteeing scheme called Prioritized Multipath WMSN (PMW) for transmitting H.264 encoded video. Multipath selection based on QoS metrics is done in the first stage, while the second stage further prioritizes the paths for sending H.264 encoded video frames on the best available path. PMW uses two composite metrics that are comprised of hop-count, path energy, BER, and end-to-end delay. A color-coded assisted network maintenance and failure recovery scheme has also been proposed using (a) smart greedy mode, (b) walking back mode, and (c) path switchover. Moreover, feedback controlled adaptive video encoding can smartly tune the encoding parameters based on the perceived video quality. Computer simulation using OPNET validates that the proposed scheme significantly outperforms the conventional approaches on human eye perception and delay.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.237-246
• /
• 2016

DIBR (Depth Image Based Rendering) is a multimedia technology that generates the virtual multi-view images using a color image and a depth image, and it is used for creating glasses-less 3-dimensional display contents. This research describes the effect of depth accuracy about the objective quality of DIBR-based multi-view images. It first evaluated the minimum depth quantization bit that enables the minimum distortion so that people cannot recognize the quality degradation. It then presented the comparative analysis of non-uniform domain-division quantization versus regular linear quantization to find out how effectively express the accuracy of the depth information in same quantization levels according to scene properties.

• Archives of Craniofacial Surgery
• /
• v.22 no.3
• /
• pp.164-167
• /
• 2021

Reconstruction of lip defects is important because the lips play an important role in maintaining aesthetic facial balance, facial expressions, and speech. There are various methods of lip reconstruction such as primary repair, skin grafting, and utilization of local and free flaps. It is important to select a proper reconstruction method according to the size and location of lip defect. Failure to select an appropriate method may result in distortion, color mismatch, sensory loss, and aesthetic imbalance. Herein we present a case of successful aesthetic reconstruction of the lower vermilion. We removed a venous malformation, which was limited to the lower vermilion and adjacent to the white roll, and repaired the defect using the modified O-Z flap.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.139-147
• /
• 2021

This paper introduces an image decomposition-based deep learning method and loss function to improve low-light images. In order to remove color distortion and halo artifact, illuminance channel of an input image is decomposed into reflectance and luminance channels, and a decomposition-based multiple structural deep learning process is applied to each channel. In addition, a mixed norm-based loss function is described to increase the stability and remove blurring in reconstructed image. Experimental results show that the proposed method effectively improve various low-light images.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.50-55
• /
• 2022

Due to the wavelength shift problem of micro LED caused by the change of current density, the active matrix driving pixel circuit that is used in OLED cannot be applied to micro LED displays. Therefore, we need a gray scale method based on modulation of duration time of light emission. In this study, we propose the PWM-controlled micro LED pixel circuit based on CMOS thin film transistors (TFTs). By adopting CMOS inverter structure, we can reduce the number of storage capacitors from the circuit and make the operating speed of the circuit faster. Most of all, our circuit is designed to make operating speed of PWM circuit faster by adopting feedback effect through double gate TFT structure. As a result, it takes about 4.7ns to turn on the LED and about 5.6ns to turn it off. This operating time is short enough to avoid the color distortion and help the precise control of the gray scale.