• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.335-341
• /
• 2013

Kyungokgos purchased in local markets in Korea vary in their combination and mixing ratios during processing. This study was investigated qualities of Kyungokgos manufactured traditionally to evaluating its qualities. The general components of Kyungokgos were moisture (18.62~49.78%), ash (0.198~1.211%), protein (0.89~3.58%), lipid (0.16~1.14%) and carbohydrates (47.95~77.08%). The color values of L, a, and b were 26.49~73.87, 16.51~38.64, and 45.41~88.94, respectively. The viscosity was classified into three non-Newtonian type groups: high, medium, and non-dilatant, according to the increase of loop execution times. Three extracts (KOG-1, -7, and -8, in a 30-fold dilution) showed no cytotoxicity toward RAW 264.7 cells, while the extracts of KOG-2, -4, and -5 showed a low cytotoxic effect. KOG-1 and -2 extracts with low cytotoxicity markedly inhibited the production of the inflammatory mediators-nitric oxide (NO) and tumor necrosis factor-alpha (TNF-${\alpha}$) in LPS-stimulated RAW 264.7 cells. These results indicate that KOG-1 and -2 extracts have anti-inflammatory activity in LPS-stimulated RAW 264.7 macrophages.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.359-365
• /
• 2013

Chrysanthemum is one of the most popular ornamental plants worldwide. Recently, lots of new and novel chrysanthemum varieties have been developed using mutagenesis. However, there was no study for comparison of tissue culture condition among the mutant varieties derived from one original variety, until now. This study was conducted to compare the efficient regeneration condition of the two chrysanthemum mutant varieties, 'ARTI-purple' and 'ARTI-queen'. Two different flower parts (disk and ray florets) at the unopened and early blooming stages were used for comparison of regeneration condition on MS medium supplemented with combinations of three growth regulators (BA, NAA, and IAA). The highest regeneration rate was identified on the NAA and BA combination when the disk florets at unopened blooming stage are used. The best optimum combinations of growth regulators were identified as NAA $1.0mg{\cdot}L^{-1}$ and BA $0.5mg{\cdot}L^{-1}$ at 'ARTI-purple', which displayed 47.9% regeneration. However, regeneration of 'ARTI-queen' was the highest as 25.6% at NAA $2.0mg{\cdot}L^{-1}$ and BA $1.0mg{\cdot}L^{-1}$. There results indicate that there is a difference for the optimum regeneration condition between the mutant varieties derived from one original variety. These results will be useful for construction of efficient regeneration system of diverse chrysanthemum mutants developed by mutation breeding.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.138-145
• /
• 2007

The effects of amylopectin and hydrocolloid (locust bean gum and guar gum) content on wheat flour dough and noodle properties were investigated. As the amount of amylopectin increased, the water absorption rate (farinograph), the tension (tension test), the gel stability (freeze-thawing treatment), and the springiness and the cohesiveness (TPA) increased, but the pasting temperature (RVA), the lightness and yellowness (color measurement), and the hardness (TPA) tended to decrease. In sensory evaluations, the scores for cohesiveness, springiness, and acceptability of cooked noodle increased as the proportion of amylopectin increased. The proper combination of amylose/amylopectin ratio and hydrocolloids improved the freeze-thaw stability and the sensory acceptability of wheat flour dough and noodle.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.351-356
• /
• 2009

This work was carried out to investigate the effects of CDDGS (corn distillers dried grains with solubles) colors and phytase levels on the amino acid digestibility of broilers for 7 days. One hundred eight Ross broilers were used in 9 treatment groups with a $3\;{\times}\;3$ factorial design as three colors of DDGSs (DDGS1, DDGS2, and DDGS3) in combination with phytase (0, 500, and 1,000 FTU/kg). The $L^*$ values of DDGS1, DDGS2, and DDGS3 were 55.2, 39.8, and 28.3; the $a^*$ values, 8.8, 7.5, and 6.1; and the $b^*$ values, 41.3, 27.1, and 15.4, respectively. The ileal digestibility of amino acids was decreased as DDGS color was dark, and increased as additive phytase level was increased in the diet. Average digestibilities of essential amino acids were 67.6~80.0%, and those of nonessential amino acids 67.4~77.3. Amino acid digestibility was low in the dark DDGS with no phytase in the diet.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.7-12
• /
• 2018

This study was conducted to determine effects of precooling and storage methods on asparagus spears' quality such as changes of fresh weight and color during simulated export distribution. Two types of precooling methods, air cooling and hydrocooling, were applied prior to packaging by comparing with no precooling as a control. Asparagus spears were packed with oxygen transmission rate (OTR) film for modified atmosphere packaging (MAP) and perforated (PF) film for a conventional packaging. All treatments were stored at $8^{\circ}C$ for 20 hours, and subsequently at $4^{\circ}C$ by final storage day, which is simulated distribution temperature condition from Yanggu, Korea to Shimonoseki, Japan. The half cooling time was 12 minutes for air cooling and 15 seconds for the hydrocooling, indicating precooling process of asparagus spears faster with the hydrocooling. Rates of respiration and ethylene production were lowest with hydrocooling. Fresh weight loss was higher, approximately 11%, at the control condition in conventional storage, compared with the MAP, less than 0.5%. Carbon dioxide and oxygen content in the MAP was in the permissible ranges for asparagus spears under recommended CA/MA conditions under both the air cooling and hydrocooling. Ethylene content in the film package was lower with the precooling treatment. Firmness of stems was lowest with the hydrocooling prior to the MAP. Visual quality, off-odor, and hue angle value were best with hydrocooling prior to the MAP. In conclusion, the combination of hydrocooling with the MAP is effective in preserving quality during the export distribution process.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.293-300
• /
• 2011

This study is conducted to develop an efficient transformation system via particle bombardment with PLBs (Protocorm-like bodies) in Cymbidium. For this, pCAMBIA3301 vector which carries a herbicide-resistant bar gene and gus gene as a reporter gene was used for transformation with Cymbidium cultivars 'Youngflower ${\times}$ masako' line. To select transformants, proper concentration of herbicide, PPT (phosphinotricin), should be determined. As a result, 5 mg/l of PPT was selected as a proper concentration. Further, proper conditions for particle bombardment were determined to obtain a high frequency of transformation. Results showed that 1.0 ${\mu}g$ of DNA concentration, 1,100 and 1,350 psi for helium gas pressure, 1.0 ${\mu}m$ of gold particle and 6 cm of target distance showed the best result for the particle bombardment experiment. Also, pre-treatment with combination 0.2 M sorbitol and 0.2 M mannitol for 4 hrs prior to genetic transformation increased the transformation efficiency up to 2.5 times. Using transformation system developed in this study, 3.2 ~ 4.0 transgenic cymbidium plants can be produced from 100 bombarded PLBs on average. Putative transgenic plants produced in this system confirmed the presence of the bar gene by PCR analysis. Also, leaves from randomely selected five transgenic lines were applied for Basta solution (0.5% v/v) to check the resistance to the PPT herbicide. As a result, three of them showed resistance and one of them showed the strongest resistance with the maintenance of green color as non-transformed plants showed. Using this established transformation system, more genes of interests can be introduced into Cymbidium plants by genetic transformation in the future.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.143-150
• /
• 2017

Effects of packaging methods for maintaining the shelf-life and postharvest quality of Korean chive (Allium tuberosum Rotter) usually called buchu in Korea was studied during fall season. Buchu, which has high moisture content and active metabolism after harvest, is characterized by the greater changes in quality during storage and distribution. It is usually packaged in paper box during distribution in domestic channel in Korea where the marketability ends within few days of harvest. In order to maintain the commercial quality of buchu, we tried to use inner film with or without absorbent paper in commercial paper box packaging. The 'Greenbelt' cultivar of buchu was harvested in october and packaged in corrugated paper box (A), in corrugated paper box with micro-perforated high density polyethylene (HDPE) film as inner material (B), a layer of absorbent paper both at the bottom and top of buchu in corrugated paper box (C) and a combination of HDPE film as inner material along with a layer of absorbent paper both at the bottom and top of buchu in corrugated paper box (D), and stored at $5^{\circ}C$ for up to 21 days. Several quality parameters such as fresh weight loss, respiration rate, color, chlorophyll content and sensory qualities were monitored during storage. When buchu was packaged only in paper box, the appearance and quality deteriorated rapidly through decay development thereby sample became unmarketable within 12 days. On the other hand, buchu packaged with inner HDPE film maintained its quality, good visual appearance and exhibited a longer period of marketable life compared to the samples stored in other treatments. However, the use of absorbent paper did not have any significant effect in maintaining quality of buchu. The uses of inner HDPE film was effective in reducing weight loss that resulted better visual appearance of buchu. Results suggest that the use of inner HDPE film in bulk type corrugated paper box packaging and storing at $5^{\circ}C$ could be the optimum condition for commercial storage of buchu. Further investigation on other quality parameters and packaging methods would be useful in maintaining the quality aspects of buchu at postharvest stages.

• Asian Journal of Turfgrass Science
• /
• v.19 no.2
• /
• pp.65-72
• /
• 2005

Creeping bentgrass (Agrostis palustris Huds.) had been the problematic weed for Kentucky bluegrass (Poa pratensis L.) fairway since it shows light green color all year. Experiment was carried out to determine the best herbicides combination to control creeping bentgrass in Kentucky bluegrass. fairway without injury. To investigate the efficacy of herbicides, five post-emergence herbicides of asulam WG ($87.6\%$), imazaquin SL ($20\%$), fenoxaprop-P-ethyl EC ($7\%$), mecoprop SL ($50\%$), triclopyr-TEA SL ($30\%$) and one pre-emergence herbicide pendimethalin EC ($31.7\%$) treated on 21 Sept. and 10 Nov. 2003. Kentucky bluegrass visual quality evaluated 30 and 50 days after application for phytotoxic effects of the herbicides. As a result, asulam WG (0.2g/$m^{2}$) and imazaquin SL (0.3ml/$m^{2}$) showed approximately $90\%$ of control in creeping bentgrass, but visual quality of Kentucky bluegrass significantly decreased from 20 to 50DAT (day after treatment). However, creeping bentgrass was acceptably controlled(over $80\%$) by fenoxaprop-P-ethyl EC (0.4ml/$m^{2}$)+triclopyr-TEA SL(0.3 ml/$m^{2}$) applied twice on 21 Sept. and 1 Oct. 2003 without serious injury on Kentucky bluegrass. Therefore, it is suggested that an application of fenoxaprop-P-ethyl EC (0.4ml/ $m^{2}$)+triclopyr-TEA SL (0.3 ml/$m^{2}$) may be more effective to control creeping bentgrass in Kentucky bluegrass with the least phytotoxicity by herbicides.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.376-382
• /
• 2012

This study examined the effects of acorn (Quercus. acutissima CARR.) jelly powder (0%, 25%, 50%, and 75%) and acorn extract (0%, 0.1%, 0.5%, and 1.0%) addition on the quality characteristics of hardtack. In the sensory test, acorn jelly powder added group scored 50% higher than the other added group. Regarding hardtack color, L (lightness) and b (yellowness) values decreased with increasing acorn powder and acorn extract addition. Hardness of hardtack increased with added acorn jelly powder, but no significant difference was observed with acorn extract. The taste and texture of the hardtack 0.1% acorn extract added group significantly increased. Overall, preferences decreased with increasing acorn extract but not significantly. In conclusion, the results of this study suggest that addition of 50% acorn jelly powder in combination with addition of less than 0.1% acorn extract to hardtack was the most desirable.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.629-635
• /
• 2002

This study was performed to develop low-fat comminuted sausages (LFSs, < 3%) manufactured with 1% single (Konjac flour, KF; kappa-carrageenan, k-CN and Locust bean gum, LBG) or mixed hydrocolloids and to select the best combination which had similar textural characteristics to those with regular-fat (~25% fat) control. In experiment 1, LFSs were formulated with each 1% hydrocolloid, smoked and cooked to an internal temperature of 71.7$^{\circ}C$. The pH range of LFSs was 6.29 to 6.34 and approximately 23~24% of fat was removed in the final products, resulting in the higher moisture and protein contents (%) in LFSs, as compared to regular-fat control. No differences (p>0.05) in cooking loss (CL, %), expressible moisture (EM, %), and hunter color values (L, a, b) were observed with the addition of each 1% hydrocolloid. However, LFSs containing 1% k-CN had textural hardness values similar to those with low-/regular-fat controls, whereas LFSs having either KF or LBG had similar cohesiveness values to those with regular-fat counterpart. Tn experiment 2, two or three mixed hydrocolloids were added to the low-fat sausage formulation. The addition of mixed KF+LBG (KLL) and KF+CN+LBG(KCL) reduced EM and textural hardness values, as compared to low-fat control. Among the treatments, LFSs containing two or three combinations of CN with KF or/and LBG had similar textural characteristics to those with regular-fat control. These results suggested that multiple addition of CN with other hydrocolloids (KF or LBG) for the replacement of fats in LFSs would be recommended for the proper functional and textural properties.