• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.519-522
• /
• 1997

In this study, the collision free path planning method of the articulated manipulator using sequential search is proposed. This method is to find the joint path of the manipulator with many degrees of freedom from the distal joint to the proximal one. To do this, the initial work space of the gantry manipulator, which is a remote maintenance equipment of the radioactive environment, is defined from the condition that the distal joint configuration is determined by the posture of maintenance. Then, 2-dimensional configuration space with the obstacle area is represented and the collision free path of manipulator is searched in the configuration space. And, this method is verified using the graphic simulation in virtual workcell for the spent fuel disassembling processes. The result of this study can be effectively used in implementing the maintenance processes for the hot cell equipment and enhance the reliability of the spent fuel management.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.232-237
• /
• 1998

This paper describes a new method for estimating time-to-collision which exhibits high tolerance to noise contained in camera images. Time to collision (TTC) is one of the most important parameters available from a camera attached to a mobile machine. TTC indirectly stands far the translation speed of the camera and is usually calculated either from successive images or optical flow by using intimate relationship between TTC and flow divergence. In most cases, however, it is not easy to get accurate optical flow, which makes it difficult to calculate TTC. In this study it is proved that if the target has a smooth surface, the average of divergence over any point-symmetric region on the image is equal to the divergence of the center of the region. It means that required divergence can be calculated by integrating optical flow vectors over a symmetric region. It is expected that in the process of the integration, accidental noise is canceled if they are independent of optical flow and the motion of the camera. Experimental results show that TTC can be estimated regardless of the surface condition. It is also shown that influence of noise is eliminated as the area of integration increases.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.34-37
• /
• 2007

The safety of ships is one of the most important concerns in terms of the environment and human life. A ship in bad condition is likely to be subject to accidents, such as collision and grounding. When a ship has minor collision damages in the form of circle or ellipse, its ultimate strength will be reduced. It is important to evaluate the reduction ratio of a ship's ultimate strength that results from damages. The strength reduction of a plate with a cutout in the form of hole has been treated by many researchers. A closed-form formula for the reduction of ultimate strength of a plate, considering the effect of several forms of cutout, has been suggested. However, the structure of ships is composed of plates and stiffeners so-called stiffened plates and it is likely that plates and stiffeners will be damaged together in collisions. This paper investigates the effect of minor collision damages on the ultimate strength of a stiffened plate by using numerical analysis. For this study, the deformed shape of minor collision damages on a stiffened plate was made by using a contact algorithm and was used as the initial shape for ultimate stress analysis. Then, a series of nonlinear FE analyses was conducted to investigate the reduction effects on the ultimate strength of the stiffened plate. The boundary conditions were simply supported at all boundaries, and the tripping of stiffener was neglected. The results are presented in the form of reduction ratio between the ultimate strength of an original, intact stiffened plate and that of a damaged stiffened plate.

• 대한기계학회논문집A
• /
• 제31권6호
• /
• pp.671-678
• /
• 2007

Front-side members of automobile, such as the hat shaped section members, are structures with the greatest energy absorbing capability in a front-end collision of vehicle. This paper was performed to analyze energy absorption characteristics of the hat shaped section members, which are basic shape of side member. The hat shaped section members consisted of the spot welded side member which was utilized to an actual vehicle and CFRP side member for lightweight of vehicle structural member. The members were tested under static axial loading by universal testing machine. Currently, stacking condition related to the collapse characteristics of composite materials is being considered as an issue fer the structural efficiency and safety of automobiles, aerospace vehicles, trains, ships even elevators during collision. So, energy absorption characteristics were analyzed according to stacking condition and shape of section and compared the results of spot welded side member with those of CFRP side member.

• 한국해양환경ㆍ에너지학회지
• /
• 제9권4호
• /
• pp.253-262
• /
• 2006

경제규모의 증대와 더불어 해상물동량이 많아지고 운행하는 선박의 숫자가 증가함에 따라 해상에서의 해난 사고가 빈번하게 발생하고 있다. 선박의 충돌 사고에 대한 연구는 주로 충돌 사고의 원인 분석에 중점을 두어 왔으나 보다 정확한 분석을 위해서는 역학적인 해석이 더 첨가되어야 한다. 본 연구는 FRP 재질의 어선간의 여러 충돌 상황에서의 시간에 따른 변형 거동에 대한 것이다. 선체에 대한 3차원 기하학적인 모델링을 수행 한 후, 유한요소 모델을 구성하고 역학적인 해석 기법인 유한 요소법을 이용하여 동적 해석을 수행하였다. 7.93톤급의 소형어선과 39톤급의 대형어선을사용하고 두 가지의 충돌각도($90^{\circ},\;135^{\circ}$)와 세 가지의 충돌속력(5, 10, 15 노트)의 조건을 조합하여 해석을 수행하였으며 각각의 경우에 대하여 응력분포와 변형상태를 살펴보았다. 전체적으로 $90^{\circ}$ 충돌 각도에서 $135^{\circ}$ 경우보다 응력이 컸으며, 두 선박이 모두 운항 중에 발생하는 충돌에서 더 큰 최대 응력이 발생하였다. $90^{\circ}$ 충돌각도의 경우 소형어선 간 충돌이나 소형 어선과 대형 어선간의 충돌에서도 충돌하는 전체의 선수부보다 충돌당하는 선체의 측면 부위에서 큰 응력이 발생하였다. $135^{\circ}$ 충돌각도로 정지된 소형 어선과 대형어선이 충돌하는 경우에는 대형 어선에서 치대 응력이 발생하였다. 150 ms의 해석시간인 경우 $90^{\circ}$ 충돌각도에서는 10knot, 15knot 모두 충돌하는 선체나 층돌 당하는 선체에서 파단이 발생하는 것으로 나타났다. 해석 결과는 추후에 부분 별 강도를 고려한 선체의 설계나 충돌사고재구성을 위한 기초 데이터로 사용될 수 있다.

• 해양환경안전학회지
• /
• 제22권6호
• /
• pp.593-599
• /
• 2016

인천대교는 인천국제공항과 송도국제도시를 연결하는 길이 13.38 km, 경간 800 m의 대형 교량으로 시간당 73.8(vessel/hour)척의 선박이 통항하고 있다. 본 연구에서는 인천대교 건설 시 설계되었던 인천대교 충돌방지공의 안전기준을 바탕으로 인천대교를 통항하는 선박의 중량에 따른 안전한 통항 속력을 제시하고자 한다. 연구방법은 AASHTO LRFD에서 제시한 선박 충돌에너지와, 선박 충돌 속도, 수리동적질량계수를 고려하여 통항 선박의 안전 속력을 제시하고자 한다. 인천대교의 충돌방지공은 10만DWT급 선박이 10노트로 통항 할 수 있도록 설계되었다. 본 연구에서는 대상선박(30만DWT급)의 선속조건 및 화물 상태의 비교 분석을 통하여 각각의 충돌에너지에 따른 제한 속력을 산정하는 방식으로 통항 선박의 안전 속력을 제시하였다. 또한 해당 수역의 조위에 따른 통항 선박의 안전 속력을 추가적으로 분석하였다. 대상선박(30만DWT급)을 통한 연구 결과 최대 15만DWT급 선박이 평균조위 이상의 수심에서 최대 7노트 속력으로 운항이 가능한 것으로 나타났으며, 경하상태(Ballast condition)에서는 최대 8노트의 속력으로 인천대교를 통항할 수 있는 것으로 분석되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1231-1234
• /
• 2005

For the purpose of objective and scientific inspection, traffic accidents should be appraised and inspected by righteous material evidences, computer simulation, and studies such as automobile engineering, traveling and collision accident dynamics, road and traffic engineering. In this paper, it displays the results of studying cases with the reasons of traffic accidents by analyzing and studying automobile kinetics, real traffic accidents and the results of in scientific and objective ways. In this paper, it is proved that with compared by dry and wet road surface condition, the transient brake time of wet condition is longer than dry road condition. Moreover, compared with unpacked road condition and packed road condition. unpacked road condition is shorter than packed road condition using computer simulation.

• 해양환경안전학회지
• /
• 제28권4호
• /
• pp.601-609
• /
• 2022

잭업드릴링 리그는 해양 석유와 가스 탐사 산업에서 널리 사용되는 모바일 해양 플랫폼이다. 그것은 시추 및 생산을 위한 캔틸레버 시추 장치가 있는 독립적인 3개의 다리가 있는 자체 승강식 장치이다. 전형적인 잭업리그는 삼각형 선체, 타워형 데릭, 캔틸레버, 잭케이스, 거주구와 다리로 구성되며 여기에는 스퍼드캔 구조, 개방형 트러스, X-교차 구조로 구성된다. 일반적으로 잭업리그는 수심 130m~170m에서만 운용이 되고 있다. 최근 들어 개발 유정이 심해로 이동하면서, 깊은 수심과 가혹한 환경조건을 만족해야 한다. 리그의 작업 상태에서 모든 정적, 동적 하중은 레그(Leg)를 통해서 지탱되는 특징이 있다. 이러한 리그의 중요한 이슈는 순간적으로 큰 충격에너지를 발생시키는 충돌에 대한 레그의 안전성이다. 본 연구에서는 LS-Dyna 프로그램을 이용하여 DNV 선급에서 규정하고 있는 충돌에너지 35MJ 요구사항에 대한 수치해석 및 검증을 수행하였다. 충돌 선박은 배수량 7,500톤 작업 지원선을 사용하였고, 5가지 충돌조건을 선정하였다. 해석결과로부터 모든 충돌조건은 선급 기준을 만족하지 못한다. 코드 방향 충돌조건은 충돌에너지 15MJ, 브레이스 충돌조건은 6MJ이 합리적이다. 따라서 충돌시나리오에 따른 합리적인 충돌에너지 기준의 제정이 필요로 하다.

• 한국대기환경학회지
• /
• 제14권5호
• /
• pp.433-442
• /
• 1998

The removal procedure of particles in the atmosphere was simulated in the saturated and dry conditions to know the effect of the saturated atmosphere on the size distributions of particles. The particles were divided into 5 ranges, 0.0mm, 0.0∼0.65mm, 0.65∼2mm, 2∼10mm and more than 10mm, and the gases were classified into the smallest range for calculation. At the dry condition, particles grew only by the collision -coalescence and were removed by gravitation. The particles in the range of 2.0∼10mm fell mostly at the 30 km distance from the pollutant source because of gravitation. The particles larger than 10 pm were removed at the 10 km distance from the pollutant source because of their gravity. But the particles larger than 10pm appeared again at more than 30km distance. It is considered that they have been grown during the smaller particles had been advected and diffused at that distance, and it needed about 1 hour from the moment of release. At the saturated condition, particles grew by both the collision-coalescence and condensation. The model showed that the condensation makes more number of particles larger than 10mm and then the particles were removed due to their large gravity. Only a few particles existed at the range of 0.65∼10mm and larger thats 10mm. It is concluded that the saturated atmosphere is effective on removing PM-10.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.39-47
• /
• 2020

In this study, crash situations of representative bus crash types were elicited by analyzing a total of 1,416 bus repair record which were collected in 2018~2019. K-means clustering was used as a methodology for this study. Bus repair record contain the information of repair term, type of bus operation, responsibility of accident, weather condition, road surface condition, type of accident, other party, type of road and type of location for each data. Also, by checking collision parts of each bus repair record, each record was classified by types of collision regions. From this, 760 record are classified to frontal type, 363 record are classified to middle-frontal type, 374 record are classified to middle-rear type and 331 record are classified to rear type. As mentioned, k-means clustering was performed on each type of collision parts. As a result, this study analyzed the severity of bus crash based on actual bus accident data which are based on bus repair record not the crash data from the TAAS. Also, this study presented crash situation of representative bus crash types. It is expected that this study can be expanded to analyzing hydrogen bus crash and defining indicators of hydrogen bus safety.