• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.2
• /
• pp.9-15
• /
• 2002

Ship operators use anchor dredging for the collision avoidance or safety of ship handling in a harbour or narrow channel. This paper clarifies the technique of the anchor dredging known as a common sense for. the seafarers A mathematical model at low speed range is established for the estimation of ship motion under the assumed environment, simulate the advance speed , and turning ability under the anchor dredging or not. The results shows good agreement with the conventional seamanship and their experiences as follows. Ahead speed used the anchor dredging is slower(speed reduction ratio:40%) than the normal ahead speed and the stopping distance is shorter (distance reduction ratio:40%)than the normal ahead distance without the anchor dredging.. Turning speed used anchor dredging is slower(speed reduction ratio:72%)than the normal ahead speed and the tactical diameter is shorter(distance reduction ratio:24%)than the diameter by the normal turning without the anchor dredging.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.2002-2009
• /
• 2006

This paper is primarily focused on the safe navigation between overtaking and overtaken vessels in restricted waterways under the external forces, such as wind and current. The maneuvering simulation between two ships was conducted to find an appropriate safe speed and distance, which is required to avoid collision. From the viewpoint of marine safety, a greater transverse distance between two ships is more needed for the smaller vessel. Regardless of external forces, the smaller vessel will get a greater effect of hydrodynamic forces than the bigger one. In the case of close navigation between ships under the forces of wind and current, the vessel moving at a lower speed is potentially hazardous because the rudder force of the lower speed vessel is not sufficient for steady-state course-keeping, compared to that of the higher speed vessel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.772-775
• /
• 2002

The remote handling and maintenance devices in the nuclear hot ceil should be checked prior to the hot operation in view of reliability and operability. In this study, the digital mock-up is implemented to analyze and define the process equipment maintenance processes instead of real mock-up, which is very expensive and time consuming. To do this, the parts of equipment and maintenance devices are modeled in 3-D graphics, assembled, and kinematics is assigned. Also, the virtual workcell of the spent fuel management process is implemented in the graphical environment which is the same as the real environment. This simulator has the several functions for verification such as analyses for the manipulator's working area, the collision detection, the path planning and graphic simulation of the processes etc. This graphic simulator of the maintenance devices can be effectively used in designing of the maintenance processes for the hot cell equipment and enhance the reliability of the spent fuel management.

• Proceedings of KOSOMES biannual meeting
• /
• 2002.10a
• /
• pp.127-134
• /
• 2002

Ship operators are used to dredge anchor for the collision avoidance or safety of ship handling in a harbour or narrow channel. This paper clarifies the technique using tile anchor dredging known as a common sense for the seafarers. A mathematical model at low speed range has been established for the estimation of ship motion under the assumed environment , simulate the advance speed , and turning ability under the anchor dredging or not. The results shows good agreement with the conventional seamanship and their experiences as follows. Ahead speed used the anchor dredging is slower(speed reduction ratio:40%) than the normal ahead speed and the stopping distance is shorter (distance reduction ratio:40%)than the normal ahead distance without the anchor dredging. Turning speed used anchor dredging is slower(speed reduction ratio:72%)than the normal ahead speed and the tactical diameter is shorter(distance reduction ratio:24%)than the diameter by the normal turning without the anchor dredging.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.89-93
• /
• 2006

This paper is primarily focused on the safe navigation between overtaking and overtaken vessels in restricted waterways under the external forces, such as wind and current. The maneuvering simulation between two ships was conducted to find an appropriate safe speed and distance, which is required to avoid collision. From the viewpoint of marine safety, a greater transverse distance between two ships is more needed for the smaller vessel. Regardless of external forces, the smaller vessel will get a greater effect of hydrodynamic forces than the bigger one. In the case of close navigation between ships under the forces of wind and current, the vessel moving at a lower speed is potentially hazardous because the rudder force of the lower speed vessel is not sufficient for steady-state course-keeping, compared to that of the higher speed vessel.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.371-374
• /
• 2024

본 논문에서는 PBD(Position-based dynamics)를 이용한 옷감 시뮬레이션에서 페이스(Face) 및 에지(Edge)의 충돌/접촉을 처리할 때 나타나는 표면 떨림 문제를 SDF(Signed Distance Field) 접근법을 통해 안정적으로 해결할 수 있는 기법을 제안한다. 충돌 제약 조건을 이용한 충돌처리에서 나타나는 옷감 시뮬레이션의 떨림 현상을 개선하기 위해 본 논문에서는 페이스 및 에지 내부에 존재하는 충돌 지점의 속도를 충돌 법선 방향과 접선 방향으로 나누어 계산하는 과정을 거치며, 그 운동량을 페이스 및 에지에 포함된 연결된 정점(Vertex)에 전달한다. 본 논문에서 제안하는 기법은 일반적인 SDF 기반 충돌 처리에서 나타나는 충돌 시 떨림 현상을 개선하며, 기존의 방법보다 안정적인 SDF 충돌처리가 가능하기 때문에 다양한 변형체 재질을 시뮬레이션 할 때 활용될 수 있다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.152-161
• /
• 2019

This research carried out a study on the job characteristics of the skipper of the coastal composite fishing vessels in order to find a way to prevent the ship collision caused by the highest human error among the marine casualty of fishing boats. Video observation was used as the research method in which six CCD cameras were installed on the vessel to collect image data and data extracted from the image were analyzed to derive the results of the functional activity of skipper according to the fishing operation process of experimental fishing vessel. The results are as follows. The working process of the experimental fishing vessel consisted of navigation for fishing ground, setting line, waiting for hauling line, hauling line and navigation to homeport. In these processes, the skipper was performing watchkeeping in the wheelhouse in which he carried out a single task, a dual task that performed two tasks simultaneously, and a triple task that performed two or more tasks simultaneously. In addition, one of the risk factors causing the collision was a no watchkeeping in the wheelhouse for navigating for fishing ground, waiting for hauling line, and hauling line at 25.4%, 64.6% and 0.3%, respectively among the marine casualty while drowsiness caused 1.2% of the marine casualty in navigating for fishing ground. Concurrent tasks that simultaneously perform two or more tasks that can overlook any other important duties while carrying out watchkeeping in the wheelhouse include 51.3% of navigation for fishing ground, 81.9% of setting line, 19.0% of waiting for hauling line, 87.9% of hauling, and 88.7% of navigation to homeport. The above concurrent tasks yielded an average of 66.1%. Experimental fishing vessels are required to focus on ship handling operations related to fishery operations, and the skipper is assigned more activities and attention to fishery related tasks. Therefore, it is considered desirable to build a collision prevention system that is appropriate to the characteristics of the skipper's work, escaping from transferring the responsibility of ship collision to the skipper completely.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.888-897
• /
• 2015

A flight capability to take a terrain following flight near the ground is required to reduce the probability that a fighter aircraft can be detected by foe's radar fence in the battlefield. The success rate for mission flight has increased by adopting TFS (Terrain Following System) to enable the modern advanced fighter to fly safely near the ground at the low altitude. This system has applied to the state-of-the-art fighter and bomber, such as B-1, F-111, F-16 E/F and F-15, since the research begins from 1960's. In this paper, the terrain following system and GCAS (Ground Collision Avoidance System) was developed, based on a digital database with UTAS's TERPRROM (TERrain PROfile Matching) equipment. This system calculates the relative location of the aircraft in the terrain database by using the aircraft status information provided by the radar altimeter and the INS (Inertial Navigation System), based on the digital terrain database loaded previously in the DTC (Data Transfer Cartridge), and figures out terrain features around. And, the system is a manual terrain following system which makes a steering command cue refer to flight path marker, on the HUD (Head Up Display), for vertical acceleration essential for terrain following flight and enables a pilot to follow it. The cue is based on the recognized terrain features and TCH (Target Clearance Height) set by a pilot in advance. The developed terrain following system was verified in the real-time pilot evaluation in FA-50 HQS (Handling Quality Simulator) environment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.95-97
• /
• 2015

Automatic Collision Prevention Training and RADAR Simulation Training, designated educations by the STCW Convention, are essential for officers to complete in order to board a ship. Recently, designated education institution standard based curriculum and requirements of the necessary facilities have been placed as a regulatory advisory requiring each institutions to match this and introduce equipment for simulation education, the FMSS(Full Mission Simulator System). Since the introduction of this research until today, a survey has been executed in order to find out the effect of utilizing the FMSS in ARPA/RADRA/Simulation Training for a period of 1 year. The result showed that 2.13times have been more effective. In addition, based on the results, identifying problems that occur during the education period and providing solutions to these problems have been proposed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.55-64
• /
• 2003

In this study, the maintenance process by the servo manipulator has been developed for the parts of the equipment, which we unable to reach out by the Master-Slave Manipulator(MSM) in a hot cell. To do this, a virtual mock-up is implemented using the iか prototyping technology. Using this mock-up, the workspace of the manipulators in the hot cell and the operator's view through the wall-mounted lead glass have been analyzed. In addition, the path planning of the servo manipulator using the collision detection function of the virtual mock-up has been established. From these, the maintenance process for the parts of the equipment, which are located at the outside of the MSM's workspace using the servo manipulator has been proposed and verified through the graphic simulation. It is revealed that the proposed remote maintenance process of the equipment can effectively be used in the real hot cell operation. It is also believed that the implemented virtual mock-up of the hot cell can effectively be applied in analyzing the various hot cell operation and enhancing the reliability and safety in a hot cell remote handling for the spent fuel management.