• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2919-2924
• /
• 2011

The automatic drawer is used to absorb the movement shock and adjust its velocity when it opens and closes. The tube in shock-absorber is the cylindrical case which surrounds its parts and is made of acetal. The purpose of this study is to determine the quality stability of the tube in the shock-absorber in injection molding process. The tube which had been manufactured in the process with 4 cavity cooling unit was used. In this study, the analysis and test are carried out to determine its quality stability. Which are the quality analysis with numerical simulation and performance tests of the tube compared with one of foreign make. It is calculated that the injection press is 87.6 MPa and the deflections in X, Y, Z directions are ranged in 0.07~1.00 mm. When the researched tube is compared with the foreign made tube, the maximum bending compressive load is 231 kgf higher, average axial compressive load is 0.05 kgf higher, and the roughness(Ra) on the inner surface is $0.02\;{\mu}m$. lower. In the result, it is known that the quality of researched tube in injection mold process is stable and its performance is superior.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.434-439
• /
• 2019

Recently, interest in urban temperature change and ground surface temperature change has been increasing due to weather phenomenon due to global warming, heat island phenomenon caused by urbanization in urban areas. In Korea, weather data such as temperature and precipitation have been collected since 1904. In recent years, there are 96 ASOS stations and 494 AWS weather observation stations. However, in the case of terrestrial networks, terrestrial meteorological data except measurement points are predicted through interpolation because they provide point data for each installation point. In this study, to improve the resolution of ground surface temperature measurement, the surface temperature using satellite image was calculated and its applicability was analyzed. For this purpose, the satellite images of Landsat 8 OLI TIRS were obtained for Seoul Metropolitan City by seasons and transformed to surface temperature by applying NASA equation to the thermal bands. The ground measurement data was based on the temperature data measured by AWS. Since the AWS temperature data is station based point data, interpolation is performed by Kriging interpolation method for comparison with Landsat image. As a result of comparing the satellite image base surface temperature with the AWS temperature data, the temperature difference according to the season was calculated as fall, winter, summer, based on the RMSE value, Spring, in order of applicability of Landsat satellite image. The use of that attribute and AWS support starts at $2.11^{\circ}C$ and RMSE ${\pm}3.84^{\circ}C$, which reflects information from the extended NASA.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.27-35
• /
• 2019

The existing middle-long span railway bridge has been mainly applied to steel box girder bridges. However, the steel box girder bridges have disadvantages in securing the space under the bridge, and the main girder is made of a thin plate box shape, resulting in a ringing noise due to the vibration. Many complaints about noise have been raised. For this reason, there is a need for the development of long railway bridges that can replace steel box girder bridges. In this paper, the characteristics of the steel composite railway bridge currently developed were introduced and a time history analysis was conducted using MIDAS Civil reflecting the speed of KTX load for 40m and 50m bridges. In addition, from the analysis results, the dynamic behavior of target bridges were verified and it was examined whether they meet the dynamic performance criteria proposed in the railway design standards. As a result, all of the bridges under review satisfied the dynamic safety criteria, however, in case of 40m of span, the vertical acceleration value was very large. In order to solve this problem, authors proposed the improvement plan and corrected the cross section to confirm that the vertical acceleration decreased.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.1
• /
• pp.35-47
• /
• 2022

Objective : In this study, we conducted a questionnaire survey of occupational therapists to examine their perceptions on and willingness to provide telerehabilitation dementia prevention education. Methods : From March 13 to 19, 2021, a questionnaire survey targeting occupational therapists in Busan, Ulsan, and Gyeongnam was conducted. 100 questionnaires were distributed but only 70 were collected. The collected data were subjected to frequency analysis and descriptive statistics using the statistical program SPSS version 23.0. Results : The average scores by region were as follows. The average compatibility score was highest at 3.92 score, intention to providing education, doctors 3.89 score, community-centric rehabilitation awareness 3.81 score, cost saving 3.78 score, perceiver usefulness 3.75 score, accessibility 3.62 score, the quality of telerehabilitation service was in order of 3.49 score. Conclusion : All items asking whether occupational therapists participate in community-centered rehabilitation and non-face-to-face dementia prevention education programs showed high scores, indicating the willingness to participate actively. In the future, in addition to follow-up research on the implementation of telerehabilitation dementia prevention education, measures for improving accessibility within the local and national government should be discussed.

• Educational Technology International
• /
• v.8 no.1
• /
• pp.17-39
• /
• 2007

The purpose of this study was to identify the relationships among organizational commitment, job satisfaction, and learning organization culture. This study was conducted in five sub-organizations of one Korean conglomerate company. One thousand employees were randomly and proportionately selected, with 669 useable cases obtained, for a response rate of 67%. The organizational commitment instrument used from the "affective, continuance, and normative commitment" scale (ACNCS) of Allen and Meyer (1990). The "Dimensions of Learning Organization Questionnaire" of Watkins and Marsick (1997) was used to measure learning organization culture. The short form MSQ (Minnesota Satisfaction Questionnaire), developed by Weiss, Dawis, England, and Lofquist (1967), was the third instrument used. Descriptive statistics, correlational statistics, and inferential statistics (ANOVA and t-tests) were used. Organizational commitment (except for continuance) is moderately and positively related to job satisfaction and moderately and positively related to learning organization culture. In addition, learning organization culture is weakly to moderately and positively related to job satisfaction. No differences by age were found. Four-year college graduates are more likely to have higher creating continuous learning opportunities in learning organization culture than graduate school degree holders. Males are likely to have higher affective and continuance organizational commitment than females. Employees working in R&D, Engineering, and Manufacturing (REM) are likely to have higher continuance organizational commitment than do other types of jobs. Employees are more likely to have higher learning organization culture and job satisfaction than assistant managers. Assistant managers have higher continuance organizational commitment than managers. Managers generally have higher organizational commitment, learning organization culture, job satisfaction than assistant managers. They also have higher learning organization culture than employees. Employees who had worked for less than four years in their current job and organization have higher promoting inquiry and dialogue in learning organization culture than those who have worked for ten years or more. Employees in the insurance organization have higher affective organizational commitment, learning organization culture, and job satisfaction than those of the other organizations. Finally, employees of the electronic company have higher continuance organizational commitment in learning organization culture than those of other companies. In summary, this research enables CEOs and HRD and HRM practitioners to view organizational commitment, learning organization culture, and job satisfaction as important variables in exploring diverse ranges of topics related to the workplace. And then, they can diversely apply their management, interventions and practices to fit these diverse characteristics.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.6
• /
• pp.1454-1463
• /
• 2023

Evaluating the antioxidant efficacy using Potentillae Chinensis Herba extract, the anti-inflammatory efficacy was tested in respiratory mucosal epithelium, RAW264.7 cells, and zebrafish. As a result, antioxidant activity increased in a concentration-dependent manner in DPPH free radical scavenging and ABTS+ cation radical activities. As a result of MTT assay for cell experiments, the survival rate of NCI-H292 cells was reduced to less than 70% when treated at each concentration of 100 ㎍/ml, subsequent experiments were conducted at 50 ㎍/ml. Anti-inflammatory efficacy evaluation, NO production, TNF-𝛼, IL-1𝛽, and PGE₂ decreased, and COX-2 also decreased significantly at 50 ㎍/ml. The mucin protein expression of Potentillae Chinensis Herba extract and bioconverted extract, it was observed that MUC5AC expression was significantly reduced. In the zebrafish toxicity evaluation, concentrations below 50 ㎍/ml did not show embryotoxicity and showed anti-inflammatory efficacy by reducing NO production due to LPS. The above results are valid to be valuable for use as a functional material that suppresses inflammation by helping the expression of Potentillae Chinensis Herba's respiratory mucus proteins.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.677-684
• /
• 2012

Injection molding process is a popular polymer processing involving plasticizing and enforcing the material flow into the mold. A polymer material shrinks according to temperature variations during the shaping process, and subsequently molding shrinkage developed. Developed deflections or warpages after molding process in part are caused by residual stress relaxation contained in the part. Adding inorganic materials or fibers such as glass and carbon to control shrinkage and enhance warpage resistance are common. In this study, warpages according to part design have been investigated through experiment. Warpages for molding conditions and mold designs such as gate locations were measured. Warpages along flow direction and perpendicular to the flow direction were also measured. Warpages near gate and far from gate were compared. Glass fiber reinforced crystalline polymers, PP and PA66 have been used in this experiment. Glass fiber reinforced crystalline polymers showed large warpage compared with glass reinforced amorphous polymers. Warpages in crystalline polymers were less influenced by molding conditions compared with amorphous polymers, however warpages of crystalline polymers significantly depend on part design.

• The Journal of Society for e-Business Studies
• /
• v.20 no.4
• /
• pp.193-208
• /
• 2015

In knowledge based society, information technology (IT) has been playing a key role in economic growth. In recent years, it is surprisingly notable that the source of value creation moved from hardware to software in IT industry. Especially, among many kinds of software products, the economic potential of open source was realized by many government agencies. Open source means software codes made by voluntary and open participation of worldwide IT developers, and many policies to promote open source activities were implemented for the purpose of fast growth in IT industry. But in many cases, especially in Korea, the policies promoting open source industry and its ecosystem were not considered successful. Therefore, this study provides the practical reasons for the low performance of Korean open source industry and suggests the pragmatic requisites for effective open source policy. For this purpose, this study applies soft system model (SSM) which is frequently used in academy and industry as a methodology for problem-solving and we link the problems with corresponding policy solutions based on SSM. Given concerns which Korean open source faces now, this study suggests needs for the three different kinds of government policies promoting multiple dimensions of industry: research and development (R&D)-side, supply-side, and computing environment-side. The implications suggested by this research will contribute to implement the practical policy solutions to boost open source industry in Korea.

• Composites Research
• /
• v.16 no.4
• /
• pp.66-73
• /
• 2003

The importance of understanding the response of structural composites to impact and CAI cannot be overstated to develop analytical models for impact damage and CAI strength predictions. This paper presents experimental findings observed from quasi-static lateral load tests, low velocity impact tests. CAI strength and open hole compressive strength tests using 3 mm thick composite plates($[45/-45/0/90]_{3s}$- IM7/8552). The conclusion is drawn that damage areas for both quasi-static lateral load and impact tests are similar and the curves of several drop weight impacts with varying energy levels(between 5.4 J and 18.7 J) follow the static curve well. In addition, at a given energy the peak force is in good agreement between the static and impact cases. It is identified that the failure behaviour of the specimens from the CAI strength tests was very similar to that observed in laminated plates with open holes under compression loading. The residual strengths art: in good agreement with the measured open hole compressive strengths. considering the impact damage site area, an equivalent hole. The experimental findings suggest that simple analytical models for the prediction of impact damage area and CAI strength can be developed on the basis of the failure mechanism observed from the experimental tests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.22-27
• /
• 2020

In this paper, we study the methodology to improve productivity and transportation efficiency simultaneously in the manufacturing environment of injection plants which has multiple injection machines arranged in parallel. In general, the post-processes such as finishing are continuously arranged in the injection machine located in the lower level of the injection plants, and one or two workers in charge of post-processing are always arranged. Therefore injection plants have low productivity due to post-processing and the front of the injection machine is very crowded due to various logistics flows. In this paper, we propose the designing methodology of conveyor structure for integrating the post-processes arranged at each injection machine and transporting the injection products to the integrated post-process automatically. Specifically, we propose the models for computing the number of conveyor units into the integrated processes, and for finding the optimal combinations to connect each machines and the conveyors. The proposed model is for the total productivity improvement, which are productivity and transportation efficiency. By applying the proposed model to companies that produce injection parts used for the home appliances, we verify the applicability and the effect of improving productivity and transportation efficiency, which more than 40%.