• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.64-64
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.3
• /
• pp.118-123
• /
• 2000

Food waste results in various problems such as decay, odors and leachate in collection, transportation and landfill due to the high volatile solids and moisture content. Acidogenic fermentation of food waste is influenced by the environmental conditions such as pH, retention time, etc. Each component of food waste is degraded under the different environmental conditions. Starch, cellulose and protein have their own optimum pHs and retention times for degradation. The degradation of starch increases at low pH, cellulose with increasing retention time, and protein with increasing retention time as well as approaching neutral pH. These mean that the degradation of food waste can be enhanced by adjusting the environmental conditions of acidogenic fermentation. The efficiency of acidification increased from 71.2 to 81.1% by controlling dilution(D) rate from 3.0 to $1.0d^{-1}$ depending on the state of the fermentation. The main component of the acidified product was shifted from butyric to acetic acid, indicating that the increase of acidification was mainly caused by the enhanced degradation of vegetables and meats.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.39-48
• /
• 2016

An information management system for a solid waste landfill site was developed, in this study, to optimize the operation and management of solid waste landfill in real time in addition to provide the information of landfill status to the landfill operator, public official concerned and local residents. The landfill information management system is composed of two systems (Solid waste landfill history management system and landfill operation and performance management system). The solid waste landfill history management system based on automated RFID/LPR system allows landfill operators to provide information of waste collection vehicles and received waste. In addition, the system aids in the identification of 3-dimensional (3D) position for landfilled solid wastes. Using the landfill operation and performance management system based on 3D laser scanner delivers information about landfill volume, settlement, landfill density, and current landfill capacity to landfill operators in real time, resulting in optimum space utilization. Ultimately, this system would dramatically reduce exposure of landfill operators to hazardous materials and improve the productivity of landfill operations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.79-93
• /
• 1984

The dissolved air flotation(DAF) has been shown to be efficient process for the removal of algae ftom water. The efficiency of DAF can be affected by the volume ratio of pressurized liquid to sample, the pressure pressurized liquid, the contact time, the appropriate coagulant and its amount, the water temperature, the turbulence of reactor, the bubble size and rising velocity etc. The purpose of this paper is to compare the practical bubble rising velocity with the theoretical one, to investigate the adhesion phenomenon of bubbles and floc, and the influence of bubble size and velocity upon the process. The results through theoretical review and experimental investigation are as follows: Ives' equation is more suitable than Stokes' equation in computation of the bubble rising velocity. The collection of bubble and algae floc is convective collection type and resulted from absorption than adhesion or collision. The treatment efficiency is excellent when the bubble sizes are smaller than $l00{\mu}m$, and the turbulence of reactor is small. In the optimum condition of continuous type DAF the volume ratio of pressurized liquid to sample is 15%, the contact time in reactor is 15 minutes, the pressure of pressurized liquid is $4kg/cm^2$ and the distance from jet needle to inlet is 30cm.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.453-457
• /
• 2016

This study investigates the hatching periods and hatchability of the eggs of Pochazia shantungensis at different collection times from 2011 to 2014, and the effect of temperature on the growth of P. shantungensis nymphs in an area of its outbreak. The hatchability of P. shantungensis eggs varies with their collection time; their hatchability in late November was higher than that in March of the next year, but no difference was observed in their hatching periods. The hatching periods of the eggs were 51.2, 31.3, 24.8, 19.4, 17.1, and 19.4 days at 15, 18, 21, 24, 27, and $30^{\circ}C$, respectively. The hatchability was above 70% at temperatures ranging from 18 to $27^{\circ}C$. The hatching time of the overwintered eggs in the Gurye region in Korea was reduced by 9 days from 2011 to 2014. The hatching rate was relatively higher when the average temperature in the winter season was relatively warmer. The dvelopmental periods of the first to fifth nymphs were 82.8, 58.0, 45.8, and 39.6 days at 18, 21, 24, and $27^{\circ}C$, respectively, at the relative humidity of 40~70%, and a photoperiod off 14 h light:10 h dark. The higher the temperature, the shorter the developmental period. At $30^{\circ}C$, all life stages after the fourth nymph died. Thus, the optimum growth temperature was estimated to be $27^{\circ}C$. For all life stages from the egg to the fourth nymph, the relationship between the temperature and developmental rate was expressed by the linear equation Y = 0.0015 X - 0.014. The lower developmental threshold was $9.3^{\circ}C$ and the effective cumulative temperature was 693.3 degree-days. The lower developmental threshold of approximately $3.8^{\circ}C$ was the lowest at the fourth nymph stage.

• Korean Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.264-272
• /
• 2007

Runoff of non-point pollutants has affected bad influence to water quality of river as reaching within short time. For this reason, reducing them prior to reaching aquatic systems or treating them after collection from discharge process of pollutants are desirable for efficient treatment of pollutants. This study was carried out to develop an ecotechnological method to prevent further aggravation of water quality by non-point source through vegetation filter strips. This study has placed a focus on improving infiltration capacity of soil for the optimum condition of vegetation filter strips. Therefore, we used titled soil filter strips instead of vegetation filter strips in this study. The three types of soil tilter strips were used in a bench scale experiment before applying to the field. The reduction efficiency of pollutants in soil filter strips (SS $84.5{\sim}92.5%$, BOD $67.9{\sim}80.6%$, T-N $43.4{\sim}76.6%$, T-P $40.6{\sim}87.4%$, Cu $28.3{\sim}48.1%$ Fe $92.1{\sim}97.7%$, Pb $81.4{\sim}97.3%$) was much higher than that of the controled group. And non-point pollutants reduction efficiency by soil filter strip's forms was estimated to be distinguishing in order of bio material, mixture of sand and gravel and lastly the whole gravel. In the event, the whole reduction efficiency of pollutants on the soil filter strips disclosed good results.

• The Korean Journal of Ecology
• /
• v.25 no.2
• /
• pp.93-100
• /
• 2002

In order to analyze the life cycle of A. artemisiifolia var. elation dormancy and some environmental factors inducing germination of the seeds were examined. The results were as follows : Dormancy of fertile seeds was broken in part within a month after seed collection in case of adequate moisture and alternating temperature was also effective in breaking dormancy. The temperature range, which allow germination was 12℃ ∼ 32℃. Optimum temperature for germination was 24℃. The seed of A. artemisiifolia var. elatior was light-independent. The difference of storage period appeared to have no particular effect on the viability of seeds at any time during the 9-month storage period. In the increasing temperature(IT) regime, A artemisiifolia var. elatior seeds started to germinate at 16℃, showing the higher temperature the greater germination rate, the final germination percentage was 99.34%. On the other hand, in the decresing temperature(DT) regime, seeds began to germinate at 20℃ with the 1.34% germination. An induced dormancy occurred at 12℃ making the 5.34% fecal germination in the DT regime. Low temperature was more effective to break dormancy than higher temperature Seeds of A. artemisiifolia var. elatior seems to be germinated in mid to late autumn or germination delayed until following spring. The above results suggest these variation of germination response in diverse environmental factors seems to be a physiological strategy to maintain their existence and to reproduce in the extreme thermal variation.

• Environmental and Resource Economics Review
• /
• v.26 no.3
• /
• pp.399-416
• /
• 2017

This study examines the problem of efficient scheduling of waste collection in isolated regions like islands when the waste accumulated amount surpasses the standard ceiling by effectively tracking the accumulating trends based on the optimum checking model of Keller (1974). To grasp whether the waste accumulated amount in isolated regions exceeds the standard ceiling, the relevant authorities can tightly check during a set period, but this entails higher monitoring costs. On the other hand, if the accumulated waste over the ceiling is not immediately checked and collected, and continues for a set period of time, innovative efforts for waste management may be highly demanded. As such, the tradeoffs are considered to draw the optimal checking schedule. This study shows that the authorities get to check less frequently the waste accumulation trends if the monitoring costs increase or when the failure rate of waste management systems drops. On the other hand, they get to check more frequently if the accumulated waste amount in isolated regions exceeds the standard ceiling and welfare loss grows as a result. It also shows that frequent checking is the optimal choice if the social marginal benefits enjoyed from innovative efforts made to keep accumulated waste below the standard ceiling, are not significant.

• The Korean Journal of Archival Studies
• /
• no.1
• /
• pp.23-76
• /
• 2000

In this paper, I examined what have been researched and determined about preservation strategy and selection of preservation media in the western archival community. Archivists have primarily been concerned with 'preservation' and 'use' of archival materials worth of being preserved permanently. In the new information era, preservation and use of archival materials were faced with new challenge. Life expectancy of paper records was shortened due to acidification and brittleness of the modem papers. Also emergence of information technology affects the traditional way of preservation and use of archival materials. User expectations are becoming so high technology-oriented and so complicated as to make archivists act like information managers using computer technology rather than traditional archival handicraft. Preservation strategy plays an important role in archival management as well as information management. For a cost-effective management of archives and archival institutions, preservation strategy is a must. The preservation strategy encompasses all aspects of archival preservation process and practices, from selection of archives, appraisal, inventorying, arrangement, description, conservation, microfilming or digitization, archival buildings, and access service. Those archival functions should be considered in their relations to each other to ensure proper preservation of archival materials. In the integrated preservation strategy, 'preservation' and 'use' should be combined and fulfilled without sacrificing the other. Preservation strategy planning is essential to determine the policies of archives to preserve their holdings safe and provide people with a maximum access in most effective ways. Preservation microfilming is to ensure permanent preservation of information held in important archival materials. To do this, a detailed standardization has been developed to guarantee the permanence of microfilm as well as its product quality. Silver gelatin film can last up to 500 years in the optimum storage environment and the most viable option for permanent preservation media. ISO and ANIS developed such standards for the quality of microfilms and microfilming technology. Preservation microfilming guidelines was also developed to ensure effective archival management and picture quality of microfilms. It is essential to assess the need of preservation microfilming. Limit in resources always put a restraint on preservation management. Appraisal (and selection) of what to be preserved was the most important part of preservation microfilming. In addition, microfilms with standard quality can be scanned to produce quality digital images for instant use through internet. As information technology develops, archivists began to utilize information technology to make preservation easier and more economical, and to promote use of archival materials through computer communication network. Digitization was introduced to provide easy and universal access to unique archives, and its large capacity of preserving archival data seems very promising. However, digitization, i.e., transferring images of records to electronic codes, still, needs to be standardized. Digitized data are electronic records, and st present electronic records are very unstable and not to be preserved permanently. Digital media including optical disks materials have not been proved as reliable media for permanent preservation. Due to their chemical coating and physical character using light, they are not stable and can be preserved at best 100 years in the optimum storage environment. Most CD-R can last only 20 years. Furthermore, obsolescence of hardware and software makes hard to reproduce digital images made from earlier versions. Even if when reformatting is possible, the cost of refreshing or upgrading of digital images is very expensive and the very process has to be done at least every five to ten years. No standard for this obsolescence of hardware and software has come into being yet. In short, digital permanence is not a fact, but remains to be uncertain possibility. Archivists must consider in their preservation planning both risk of introducing new technology and promising possibility of new technology at the same time. In planning digitization of historical materials, archivists should incorporate planning for maintaining digitized images and reformatting them in the coming generations of new applications. Without the comprehensive planning, future use of the expensive digital images will become unavailable. And that is a loss of information, and a final failure of both 'preservation' and 'use' of archival materials. As peter Adelstein said, it is wise to be conservative when considerations of conservations are involved.

• Management & Information Systems Review
• /
• v.3
• /
• pp.287-316
• /
• 1999

Cyberspace permits us to more beyond traditional face-to-face, mail and telephone surveys, yet still to examine basic issues regarding the quality of data collection: sampling, questionnaire design, survey distribution, means of response, and database creation. This article address each of these issues by contrasting and comparing traditional survey methods(Paper-and-Pencil) with Internet or Personal Computer networks-mediated (Screen-and-Keyboard) survey methods also introduces researchers to this revolutionary and innovative tool and outlines a variety of practical methods for using the Internet or Personal Computer Networks. The revolution in telecommunications technology has fostered the rapid growth of the Internet all over the world. The Internet is a massive global network and comprising many national and international networks of interconnected computers. The Internet or Personal Computer Networks could be the comprehensive interactive tool that will facilitate the development of the skills. The Internet or Personal Computer Networks provides a virtual frontier to expand our access to information and to increase our knowledge and understanding of public opinion, political behavior, social trends and lifestyles through survey research. Comparable to other technological advancements, the Internet or Personal Computer Networks presents opportunities that will impact significantly on the process and quality of survey research now and in the twenty-first century. There are trade-offs between traditional and the Internet or Personal Computer Networks survey. The Internet or Personal Computer Networks is an important channel for obtaining information for target participants. The cost savings in time, efforts, and material were substantial. The use of the Internet or Personal Computer Networks survey tool will increase the quality of research environment. There are several limitations to the Internet or Personal Computer Network survey approach. It requires the researcher to be familiar with Internet navigation and E-mail, it is essential for this process. The use of Listserv and Newsgroup result in a biased sample of the population of corporate trainers. However, it is this group that participates in technology and is in the fore front of shaping the new organizations of interest, and therefore it consists of appropriate participants. If this survey method becomes popular and is too frequently used, potential respondents may become as annoyed with E-mail as the sometimes are with mail survey and junk mail. Being a member of the Listserv of Newsgroup may moderate that reaction. There is a need to determine efficient, effective ways for the researcher to strip identifiers from E-mail, so that respondents remain anonymous, while simultaneously blocking a respondent from responding to a particular survey instrument more than once. The optimum process would be on that is initiated by the researcher : simple, fast and inexpensive to administer and has credibility with respondents. This would protect the legitimacy of the sample and anonymity. Creating attractive Internet or Personal Computer Networks survey formats that build on the strengths of standardized structures but also capitalize on the dynamic and interactive capability of the medium. Without such innovations in survey design, it is difficult to imagine why potential survey respondents would use their time to answer questions. More must be done to create diverse and exciting ways of building an credibility between respondents and researchers on the Internet or Personal Computer Networks. We believe that the future of much exciting research is based in the Electronic survey research. The ability to communicate across distance, time, and national boundaries offers great possibilities for studying the ways in which technology and technological discourse are shaped. used, and disseminated ; the many recent doctoral dissertations that treat some aspect of electronic survey research testify to the increase focus on the Internet or Personal Computer Networks. Thus, scholars should begin a serious conversation about the methodological issues of conducting research In cyberspace. Of all the disciplines, Internet or Personal Computer Networks, emphasis on the relationship between technology and human communication, should take the lead in considering research in the cyberspace.