• 제목/요약/키워드: Collection Analysis

검색결과 4,619건 처리시간 0.03초

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁;김용운
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.65-83
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

  • PDF

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.64-64
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

국내 유기와 관행 재배 인삼의 토양화학성과 생육 특성 조사 (Research of Chemical Properties of Soil and Growth Characteristics of Panax ginseng under Organic and Conventional Cultivation Systems in Korea)

  • 임진수
    • 한국유기농업학회지
    • /
    • 제24권3호
    • /
    • pp.435-451
    • /
    • 2016
  • 본 연구는 유기재배와 관행재배지의 토양화학성 및 인삼의 생육특성을 비교 분석하기 위하여 수행하였다. 유기재배 인삼과 관행재배 인삼 시료 채취는 전국 14개 지역 52개 포장에서 4, 5, 6년근을 대상으로 2013년부터 2015년까지 3년에 걸쳐 10월부터 11월까지 2개월 동안 이루어졌다. 인삼 유기재배에서는 수량을 높이기 위해 관행재배지와 비슷하게 양분의 함량이 높아지고 있어 토양화학성기준에 맞는 적합한 관리가 요구된다. 유기재배 인삼은 관행재배 인삼보다 생육기간이 60일 이상 짧은 특징을 보였으며 1 ha당 평균 수량도 관행 수량의 60% 수준이었다. 근중은 유기재배 인삼이 관행재배 인삼의 54% 정도였다. 동직경 및 체형계수도 유기재배 인삼이 관행재배보다 더 작아 유기재배 인삼이 가늘고 긴 특징을 보였다. 근장은 답전윤환지의 비율이 낮은 관행재배 인삼 5년근에서 길었다. 지근의 수는 직파재배의 비율이 높은 유기재배 인삼 5, 6년근에서 적었다. 건물중은 관행재배보다 조기낙엽이 발생된 유기재배 인삼의 5, 6년근에서 뚜렷하게 낮았다. 동할과 뿌리썩음병은 관행재배에서 많은 경향이었는데 동할은 4, 6년근에서 뚜렷하게 많았으며 뿌리썩음병은 5, 6년근에서 많이 발생되었다. 토양수분의 영향을 많이 받는 적변과 선충의 피해는 유기재배 4년근에서 많았다. 즉 유기재배 인삼은 관행재배보다 조기낙엽 현상이 뚜렷하여 수량 및 근중이 낮은 반면 생리장해는 적었다. 유기재배 인삼의 수량을 높이기 위해서는 조기낙엽의 문제를 극복할 수 있는 재배 기술적인 연구가 필요하며 생리장해를 줄일 수 있는 토양 수분관리가 필요하다.

이른 여름 동중국해 대륙사면의 해양환경과 소형 식물플랑크톤 군집의 연직분포 특성 (Vertical Profiles of Marine Environments and Micro-phytoplankton Community in the Continental Slope Area of the East China Sea in Early Summer 2009)

  • 윤양호
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제16권3호
    • /
    • pp.151-162
    • /
    • 2013
  • 2009년 이른 여름 동중국해 동부의 대륙사면을 대상으로 해양환경과 소형 식물플랑크톤 군집을 조사하였다. 수온약층은 뚜렷하지 않고 수심에 따라 완만하게 감소하였다, 염분은 표층에서 낮고 비교적 깊은 수심까지 균일한 분포를 보이나, 중간 수층이하에서는 수심과 비례하여 150~200 m에서 최댓값을 보인 다음 감소하였으나, 변화 폭은 크지 않았다. sigma-t의 변화는 수온에 의해 지배되어, 표층에서 수심과 함께 완만히 증가하여 약 500 m에서 표층보다 약 3 $kg/m^3$ 높은 값을 나타내었다. 광량은 해수 표층에서 급격히 감소하여, 보상심도는 약 100 m 수심에 위치하였다. 엽록소 a의 연직분포는 수온이나 염분보다 광량에 더욱 영향을 받는 것으로 나타났으며, 보상심도에서 최댓값을 나타내었다. 소형 식물플랑크톤 군집은 56속 103종으로 비교적 다양하였고, 세포밀도 역시 엽록소 a가 최댓값을 나타내는 수심에서 112.0~470.0 cells/L로 가장 높게 나타났다. 우점종에서 극우점하는 종은 없고, 낮은 점유율로 다양한 종이 출현하지만, 일부 정점에서 규질편모조류인 Octactis octonaria나 규조류인 Leptocylindrus mediterraneus에 의해 26%의 우점율은 나타내는 것은 이례적이다. 본 연구의 결과는 개방된 빈영양 해역의 식물플랑크톤 등 미소생물의 군집 해석은 표층, 중층 및 저층과 같은 일정 수심 간격의 조사가 아닌, 해양환경의 연직분포나 엽록소 최대층의 파악과 같은 연속관측의 결과와 연계된 생태연구가 필수적임을 지적하고 있다.

일 병원직원들의 호스피스 프로그램에 대한 인식 (Attitude of Hospital Staff toward Hospice Care - The Program at Wonju Christian Hospital -)

  • 최상순;허혜경;박소미;김대란;김기경;노병선
    • Journal of Hospice and Palliative Care
    • /
    • 제4권2호
    • /
    • pp.145-153
    • /
    • 2001
  • 목적 : 본 연구는 자원봉사자에 의해서만 호스피스 활동이 이루어지고 있는 W병원의 호스피스 활동을 확대시키고 체계화시키기 위한 목적으로 1단계 호스피스 자원봉사자의 활동분석에 이은 2단계 연구로서 직원들의 호스피스 프로그램에 대한 태도를 조사한 서술연구이다. 방법 : 연구대상자는 W병원의 의사, 간호사, 의료 관련기사, 사무직 등 전체 1200여명의 직원에서 각 직종별 층화표집법을 이용하여 임의표출된 430명이다. 자료수집은 본 연구자들이 개발한 질문지를 이용한 자가보고법에 의하여 수행되었으며, 자료분석은 SPSS를 이용한 서술통계와 내용분석법을 이용하였다. 결과 : 1) 호스피스 개념에 대한 이해를 조사한 결과 대상자의 97% (n=417)가 호스피스에 대해 알고 있었고, 97.4%(n=419)가 죽음을 앞둔 환자들은 존귀한 대접을 받아야한다고 응답한다. 또한 호스피스팀 구성요원에 대한 의견조사 결과 가족(57%), 의사(17.9%), 성직자(9.5%), 간호사(7.9%)가 포함되어야 한다고 응답하였으며 이외에도 사회사업가, 자원봉사자, 물리치료사등 다양하게 응답하였다. 2) 호스피스 프로그램 운영에 대한 태도를 조사한 결과 W병원의 체계적인 호스피스 프로그램 운영을 위하여 최우선적으로 이루어져야 할 활동은 "호스피스 전담부서를 만든다"가 31.4%(n=135)로 가장 높았으며, 다음은 "호스피스 전담병동을 만든다"로 28.6%(n=123)였다. 또한 현재 자원봉사자에 의한 W 병원의 호스피스활동 인지도는 대상자의 67.2%(n=289)만이 알고 있었으며, 반면에 호스피스 서비스 이용 의도는 85.3%(n=367)로 나타났다. 호스피스 프로그램 운영시 장점은 '기독교 정신을 바탕으로 한 인간존중의 병원사명 구현'이 45%로 가장 높은 분포를 보였다. 3) 말기환자에 대한 태도를 조사한 결과 죽음에 대한 태도(4점척도)를 조사한 결과 평균 2.84점(SD=.471) 이었으며, 말기환자들의 병원입원 치료이외에 필요로 되는 서비스는 '종교, 가족, 환자간 지지체계의 구축'이 28.3%로 가장 높은 분포를 나타냈다. 결론 : 본 연구결과 W병원 직원 대부분은 체계적인 호스피스 활동의 필요성을 인식하고 있으며 이를 위하여 최우선으로 필요한 것은 호스피스 활동을 위한 행정구조적 지원임을 알 수 있다. 그러므로 본 연구결과는 W병원의 호스피스 프로그램을 계획하고 추진하는데 기초자료로 활용될수 있을 것으로 기대된다.

  • PDF

토픽모델링을 활용한 국내 문헌정보학 연구동향 분석 (A Study on the Research Trends in Library & Information Science in Korea using Topic Modeling)

  • 박자현;송민
    • 정보관리학회지
    • /
    • 제30권1호
    • /
    • pp.7-32
    • /
    • 2013
  • 본 연구는 국내 문헌정보학 분야의 연구동향을 규명하기 위하여 문헌정보학 주요 학술지인, 정보관리학회지, 한국문헌정보학회지, 한국도서관 정보학회지, 한국비블리아학회지의 1970년도부터 2012년도까지 발표 논문 초록을 수집하여 LDA(Latent Dirichlet Allocation)기반의 토픽 모델링 실험을 수행하였다. 그 결과를 종합하면 다음과 같다. 첫째, 토픽모델링 실험에서 도출된 연구주제를 문헌정보학 주제분류표와 비교 분석한 결과, '정보학'영역의 디지털도서관, 이용연구, 인터넷, 전문가시스템, 계량정보학, 자동화, 정보검색, 정보시스템, '도서관 서비스'영역의 정보서비스, 도서관 유형별 서비스, 이용자 교육/정보리터러시, 서비스 평가, '문헌정보학 기초'영역의 도서관과 사회, 전문성, '자료조직'영역의 분류, 편목, 메타데이터, '도서관 경영'영역의 도서관 평가, 장서개발/관리, '서지학'영역의 고서지, '도서관 체제'영역의 도서관 및 정보정책, '출판'영역의 도서/출판, '기록관리학'영역의 하위주제 등과 연결할 수 있었다. 또한 가장 많은 연구주제가 발견된 학문영역은 정보학과 도서관서비스로 나타났다. 둘째, 문헌정보학의 주요 연구주제에서 도서관 유형별 서비스 및 평가, 인터넷, 메타데이터의 연구주제는 상승세를 보였으나, 도서, 분류, 편목, 고서지에 관한 연구주제는 하강세를 보였다. 셋째, 학술지를 구분하여 비교 분석한 결과, 정보관리학회지는 도서관에 관한 연구주제보다 정보학에 관한 연구주제가 많이 출현하였고, 한국문헌정보학회지와 한국도서관 정보학회지, 한국비블리아학회지는 도서관에 관한 연구주제가 정보학에 관한 주제보다 많이 나타났다.

농산물 소매유통환경 변화에 따른 국내 산지유통조직 개선방안에 관한 연구: 조직화·규모화·전문화를 중심으로 (A Study 0n the Improvement of the domestic in producing area organizations According to the change retail environment: Focused on organized, scaled, Specialization.)

  • 김대윤
    • 산경연구논집
    • /
    • 제2권2호
    • /
    • pp.5-14
    • /
    • 2011
  • 1996년도의 유통시장개방을 계기로 소매유통 환경이 급변하기 시작하였으며, 이러한 소매유통 환경변화에 대한 대응력을 강화하기 위해 조직화를 통한 규모화가 산지의 중요한 과제로 대두되고 있다. 이에 산지에서는 여건변화에 대응하기 위하여 소규모 개별농가가 조직화를 통해 전문화·대규모화 되어 가고 있고, 품목별·지역별로 특화되어 가는 양상을 보이고 있다. 하지만 소비지 시장에 대한 경쟁력 강화라는 관점에서는 여전히 문제점을 보이고 있는 것이 사실이다. 이러한 문제점의 가장 대표적인 경우가 시장대응상의 산지유통조직의 조직화·규모화 문제이다. 본 연구에서는 선행연구들을 통한 농산물 유통환경 변화에 따른 산지 조직화 배경 및 필요성, 국내 산지유통조직의 현황 및 문제점, 국내·외 산지유통조직 우수사례를 살펴보고, 조직화·규모화를 중심으로 향후 산지유통조직 경쟁력 제고방안을 위한 개선방안에 대해 제시하였다. 연구 결과, 농산물 소매유통환경 변화에 따라 산지유통조직의 경쟁력을 제고하기 위한 개선방안으로 1) 원물수집 체계 다양화를 통한 가동률 향상 및 조직화 강화, 2) 전문화된 품목의 광역연합마케팅 추구를 통한 규모화 실현, 3) 국외 산지유통조직 우수사례인 프랑스 "브레따뉴 청과물 경제위원회"와 같은 관리 운영조직 설치 및 운영, 4) 국내에 적합한 산지유통조직모델 개발을 위한 지원체계 확립 등의 4가지를 제시하였다. 특히 국내 산지의 경우 산지조직화·규모화에 성공한 각종 사례분석을 통해, 조직적 규모화의 과정 속에서 생겨나는 각종 어려움과 그에 대한 극복방식 등을 일반화 시켜가는 노력이 요구된다.

  • PDF

대학생의 건강지각, 자기효능감, 사회적 지지가 건강증진행위에 미치는 영향 (Effects of Health Perception, Self-efficacy and Social Support of College Students on the Health Promotion Behaviors)

  • 우복진;이혜경
    • 한국응용과학기술학회지
    • /
    • 제36권4호
    • /
    • pp.1290-1302
    • /
    • 2019
  • 본 연구는 대학생의 건강지각, 자기효능감, 사회적 지지가 건강증진행위에 미치는 영향을 확인하기 위한 서술적 조사연구이다. 본 연구대상자는 충남 일개 대학에 재학 중인 대학생 196명을 대상으로 하였으며, 자료 수집은 2018년 9월 10일부터 10월 5일까지 이루어졌다. 연구결과 대학생의 일반적 특성에 따른 건강증진행위의 차이에 대한 분석 결과 거주형태(F=8.56, p<.001), 주관적 건강상태(F=7.23, p=.001), 대학생활 만족도(F=8.50, p<.001), 운동여부(t=6.62, p<.001), 주당 아침식사 횟수(F=14.13, p<.001)에 따라 통계적으로 유의한 수준에서 차이가 있었다. 건강증진행위와 건강지각(r=.44, p<.001), 자기효능감(r=.57, p<.001), 사회적 지지(r=.49, p<.001)가 서로 유의미한 양의 상관관계를 보였다. 대학생의 건강증진행위에 영향을 미치는 요인(F=34.921, p<.001)은 자기효능감, 사회적 지지, 주당 아침식사 횟수(5회 이상), 운동여부(한다), 주당 아침식사 횟수(2~4회), 거주형태는 자취·하숙, 학년은 4학년이었으며, 설명력은 총 56.9%이었다. 건강증진행위를 향상시키기 위해서는 자기효능감과 사회적 지지 체계를 고려하고 적절한 운동과 올바른 식습관에 대한 중요성을 포함한 세대별 맞춤형 건강증진프로그램 개발 및 중재가 필요하다.

사례기반추론을 이용한 사무지식 추천시스템 (A Study on the Design of Case-based Reasoning Office Knowledge Recommender System for Office Professionals)

  • 김명옥;나정아
    • 지능정보연구
    • /
    • 제17권3호
    • /
    • pp.131-146
    • /
    • 2011
  • 오늘의 글로벌 네트워크 비즈니스 환경에서 비서직 종사자들에게 신속 정확한 정보수집 능력과 올바른 판단력은 그 어느 때보다 필요한 역량으로 중시되고 있다. 비서직 업무 수행에 필요한 대부분의 지식은 체험지 혹은 경험지이기 때문에 비서가 주어진 문제를 해결하기 위해서 과거의 비슷한 사례를 참고하는 방법은 매우 타당한 것이며, 경험이나 선례를 적용함으로서 실패할 요인을 줄이고 문제 해결의 질을 높이는 동시에 시간을 단축시킬 수 있다. 본 연구에서는 비서 업무 수행 시 특정 문제 해결에 필요한 정보를 사례기반 추론에 근거하여 현재 문제와 가장 유사한 과거의 사례를 추천하는 시스템(COKRS : Case-based reasoning Office Knowledge Recommender System, 이하 COKRS)을 설계하고 프로토타입을 구축함을 목적으로 한다. 본 연구 결과인 COKRS는 비서직에서 뿐만 아니라 일반 사무영역에서의 지식관리 목적으로도 확대 이용 될 수 있을 것이다.

설비공학 분야의 최근 연구 동향 : 2010년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2010)

  • 한화택;이대영;김서영;최종민;김수민;권영철;백용규
    • 설비공학논문집
    • /
    • 제23권6호
    • /
    • pp.449-469
    • /
    • 2011
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.