• 한국환경과학회지
• /
• 제25권1호
• /
• pp.127-134
• /
• 2016

This study is conducted to get current state of data collection and utilization of the trees damaged by pine wilt disease, and to efficiently collect and utilize of the trees damaged by the pine wilt disease and abandoned fumigation-treated trees at forecasts. The method to control pine wilt disease damaged area is mostly fumigation treatment system, and there is no collection and utilization of damaged trees because of absence of efficient collection system, lack of collection cost, and absence of policy, etc. A survey is conducted that asked about the satisfaction degree for the trees damaged by pine wilt disease collection and use divided into 6 topics. It was positively recognized that the need and problem of the trees damaged by pine wilt disease, and results and satisfaction of forestry mechanization while it was mostly negatively recognized that the policy satisfaction for prevention and collection, satisfaction of collection and use, collection and forestry mechanization, and satisfaction of foundation equipment for forestry mechanization, etc. As a result of path analysis, it is necessary to promote a high-tech forestry mechanization to improve satisfaction level of results and satisfaction of forestry mechanization for the trees damaged by pine wilt disease collection and utilization, it is also need to make an effort in various ways for improve satisfaction level of satisfaction of collection and utilization.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.723-728
• /
• 2009

The response property of the CZT detector ($5{\times}5{\times}5\;mm^3$), widely used in photon spectroscopy, was evaluated by considering the charge collection efficiency, which depends on the interaction position of incident radiation, A quantitative analysis of the energy spectra obtained from the CZT detector was also performed to investigate the tail effect at the low energy side of the full energy peak. The collection efficiency of electrons and holes to the two electrodes (i.e., cathode and anode) was calculated from the Hecht equation, and radiation transport analysis was performed by two Monte Carlo codes, Geant4 and MCNPX. The radiation source was assumed to be 59.5 keV gamma rays emitted from a $^{241}Am$ source into the cathode surface of this detector, and the detector was assumed to be biased to 500 V between the two electrodes. Through the comparison of the results between the Geant4 calculation considering the charge collection efficiency and the ideal case from MCNPX, an pronounced difference of 4 keV was found in the full energy peak position. The tail effect at the low energy side of the full energy peak was confirmed to be caused by the collection efficiency of electrons and holes. In more detail, it was shown that the tail height caused by the charge collection efficiency went up to 1000 times the pulse height in the same energy bin at the calculation without considering the charge collection efficiency. It is, therefore, apparent that research considering the charge collection efficiency is necessary in order to properly analyze the characteristics of CZT detectors.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 춘계학술대회
• /
• pp.47-47
• /
• 2020

The Korean National Agrobiodiversity Center holds the more than 1300 accessions of proso millet, but a large portion of accessions are landrace of Korea that has very similar traits. To comprehend the maximum genetic diversity of this crop, a core collection with minimum number of accessions will facilitate easy access to genetic material. Here we assessed the genetic diversity and population structure in a germplasm collection of 830 accessions by employing EST-SSR markers and morphological traits. A total of 107 alleles were detected with an average allele number of 4.9 per locus among the 830 accessions based on 37 EST-SSR markers. The number of alleles per locus ranged from 2 to 7. Polymorphism information content and expected heterozygosity ranged from 0.06 to 0.68 (mean = 0.21) and 0.06 to 0.73 (mean = 0.23), respectively. The germplasm collection was separated into two groups based on population structure analysis, whereas principal coordinate analysis (PCoA) could not cluster accessions according to their geographic origin. Subsequently, a preliminarily developed core collection with a total of 141 accessions (17%) was selected from the whole set of germplasm by combining allelic variations of EST-SSR markers and eight different phenotypic traits. The core collection optimally represented the whole germplasm collection and displayed a similar level of PCoA value and genetic variation from the initial collection. The results obtained here provide a primary resource for further genetic analysis and establish a reference for further development of appropriate genetic breeding strategies.

• 농촌계획
• /
• 제25권3호
• /
• pp.11-18
• /
• 2019

It is widely known that agricultural plastic waste incineration by farmers may cause big forest fire or fine dust in rural areas. Hence, how to increase the rate of collection and recycling of the agricultural plastic waste is of concern to policy makers especially for rural environment. The purpose of this study is to find the determinants of the collection rate of agricultural plastic waste. This study used the data from 'Research on Agricultural Waste' by the Korea Environment Corporation from year 2012 to 2015 for 163 regions. This study found that the compensation rate for collection, the frequency of collecting services, and the quality of waste are important to increase the collection rate. And the regions with more elderly and low income people are more likely to have higher collection rate. Finally, the chief producing regions that are specialized in a certain crop shows higher collection rate.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.573-576
• /
• 2013

In this paper, analysis method for current collection performance based on real-time current of catenary system is proposed. An innovative method based on track-side of railway system is used for measurement of currents for overhead contact line during the collection with pantograph. The evaluation of a qualitative ratio for current collection performance were conducted using proposed algorithm under various conditions such as laboratory and track-side. To check the validity of our approach, we compared between calculation results from current of contact wire and measurement results from arcing of pantograph using simulator in laboratory conditions. The results show that the behavior of current collection performance were analysis from currents of overhead contact line in AC electric railway system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
• /
• pp.142-147
• /
• 1995

Dynamic characteristics of current collection system is one of the major factors which decide the performance of high speed train. To find good design parameters of the current collection system design guide is prepared through the engineering analysis in this study. The analysis starts from the statics of catenary system which results in the sinusoidal variation of stiffness, which is inherently nonlinear Mathieu equation. Simple physical models of rigid trolley wire and Mathieu equation are considered. To simulate the dynamic response of current collection system, numerical integration based on central difference method and modal analysis are presented. The calculated results of central difference method show superior to those of Euler based algorithm.

• Journal of Preventive Medicine and Public Health
• /
• 제24권2호
• /
• pp.211-220
• /
• 1991

Finances of health insurance can be explained by factors determining benefit expense and premium collection. This study was conducted to analyze factors contributing to the financial status of rural health Insurance. Nationwide 134 health insurance associations except the six pilot project counties were analyzed and obtained the followings. 1. In univariate analysis, statistically significant variables that explain 1) outpatient benefit expenditures include public health center utilization, proportion of pregnant women. premium and collection rate of premium 2) inpatient benefit expenditures include public health center utilization, Proportion of old age, proportion of pregnant women, premium and collection rate of premium 3) profits include public health center utilization, proportion of old age, proportion of pregnant women and collection rate of premium. 2. In multiple regression analysis, statistically significant determinants in 1) outpatient benefit include premium and public health utilization 2) inpatient benefit include premium 3) profit include public health center utilization, premium and collection rate of premium.

• 한국비블리아학회지
• /
• 제24권4호
• /
• pp.115-131
• /
• 2013

본 연구의 목적은 대학도서관 이용자들의 대출기록을 이용하여 자료이용행태를 분석하는데 있다. 이를 위하여, A대학도서관의 2012년 3월부터 2013년 2월말 사이에 발생한 264,804건의 대출관련 데이터를 수집하여 사용하였다. 자료의 주제별 그리고 이용자 유형에 따른 자료이용행태 분석을 위해, 전체 주제를 16개군으로 구분하였으며, 이용자 유형은 5개 집단(학부생, 대학원생, 교수, 직원, 기타이용자)으로 구분하였다. 이를 통해 대학도서관 이용자들의 주제별 자료이용 정도, 이용자 유형에 따른 주제별 자료이용 정도, 최신자료에 대한 주제별 선호도, 이용자 유형에 따른 최신자료의 선호도 등을 분석하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.121-128
• /
• 2021

In order to design a real time big data collection and analysis system of manufacturing data in a smart factory, it is important to establish an appropriate wired/wireless communication system and protocol. This paper introduces the latest communication protocol, OPC-UA (Open Platform Communication Unified Architecture) based client/server function, applied user interface technology to configure a network for real-time data collection through IoT Integration. Then, Database is designed in MES (Manufacturing Execution System) based on the analysis table that reflects the user's requirements among the data extracted from the new cutting process automation process, bush inner diameter indentation measurement system and tool monitoring/inspection system. In summary, big data analysis system introduced in this paper performs SPC (statistical Process Control) analysis and visualization analysis with interface of OPC-UA-based wired/wireless communication. Through AI learning modeling with XGBoost (eXtream Gradient Boosting) and LR (Linear Regression) algorithm, quality and visualization analysis is carried out the storage and connection to the cloud.

• Advances in Computational Design
• /
• 제5권3호
• /
• pp.261-276
• /
• 2020

The reasonable layout of vacuum cleaner can effectively improve the collection efficiency of iron filings generated in the process of steel production. Therefore, in this study, the CFD-DEM coupling model and two-fluid model are used to calculate the iron filings collection efficiency of vacuum cleaner with different inclination/cross-sectional area, pressure drop and inlet angle. The results are as follows: The CFD-DEM coupling method can truly reflect the motion mode of iron filings in pneumatic conveying. Considering the instability and the decline of the growth rate of iron filings collection efficiency caused by high pressure drop, the layout of 75° inclination is suggested, and the optimal pressure drop is 100Pa. The optimal simulation results based on two-fluid model show that when the inlet angle and pressure drop are in the range of 45°~65° and 70Pa~100Pa, larger mass flow rate of iron filings can be obtained. It is hoped that the simulation results can offer some suggestion to the layout of vacuum cleaner in the rolling mill.