• 유기물자원화
• /
• 제6권2호
• /
• pp.113-129
• /
• 1998

본 연구에서는 가정에서의 음식물찌꺼기 분리 수거 방안을 구체적으로 제시하는 것을 목적으로 실질적으로 분리 수거의 주체가 될 각 가정의 배출자들을 대상으로 이들의 분리 수거에 대한 의식과 성향을 조사하였다. 설문 응답자들의 음식물찌꺼기 보관/배출/수거 주기에 대한 의견을 종합하면 음식물찌꺼기로 인한 냄새 발생 등을 최소하기 위해서는 매일 음식물찌꺼기를 버려야 하지만 자주 버리는 것으로 인한 번거로움도 있으므로 집안에서 2-3일간의 음식물찌꺼기를 현행 종량제 봉투와는 크기가 다른 비닐 봉투 등 별도의 음식물찌꺼기 용기에 모아 두었다 집밖의 분리 수거통에 배출하면 수거하는 쪽에서는 매일 분리 수거통에 모아진 음식물찌꺼기를 수거해가는 것으로 요약된다. 그리고 이때 사용되는 보관 및 배출 용기는 크기를 이틀 발생분(1.87L, 약 2L) 또는 3일 발생분(2.8L, 약 3L)의 두가지로 제작하는 것이 타당한 것으로 분석되었다. 또한 음식물찌꺼기의 보관 및 배출에 적당한 용기는 비닐 봉투가 좋다는 의견이 가장 많았으며 비닐 봉투는 일회용이라는 점이 응답자들의 선택에 큰 영향을 미친 것으로 판단되었다. 봉투의 적정 가격에 대한 조사결과 전용 봉투의 가격은 싸게 하면 분리수거에 효과가 있겠으나 발생량 감소에는 그 효과가 미지수이며 비싸게 하면 발생량 감소에 효과있는 반면 분리수거에는 역효과가 일어나는 문제가 있는 것으로 나타났으며 대안으로서 봉투를 2가지 형태로 판매하는 방식이 제시되었다.

• 한국대기환경학회지
• /
• 제27권3호
• /
• pp.272-280
• /
• 2011

A novel particle removal system for air handling unit (AHU) of subway station was evaluated experimentally. The novel system was designed in order to minimize the maintenance cost by applying axial-flow cyclones. The system consists of multiple cyclone units and dust trap. Based on our previous numerical study, it was found to be effective for removal $1\sim10{\mu}m$ sized dust particles. In this study, we manufactured the mock-up model and evaluated the model experimentally. Liquid and solid test particles were generated for evaluating collection efficiency of the system and the pressure drop was monitored. The collection efficiency was varied from 41.2% to 85.9% with increasing the sizes of particle from 1 to $6.5{\mu}m$ by particle count ratio of inlet and outlet. The pressure drop was maintained constant less than $20mmH_2O$. In addition, the collection efficiency was estimated by total mass for solid test particles. It was found that the collection efficiency was 65.7% by particle mass ratio of inlet and outlet. It shows that present system can replace current pre-filters used in subway HVAC system for removing particulate matters with minimal operational cost.

• Journal of Information Technology Applications and Management
• /
• 제26권5호
• /
• pp.13-25
• /
• 2019

Recently, as evaluation of information security (IS) management become more diverse and complicated, the contents and procedure of the evidence to prepare for actual assessment are rapidly increasing. As a result, the actual assessment is a burden for both evaluation agencies and institutions receiving assessments. However, most of them reflect the evaluation system used by foreign government agencies, standard organizations, and commercial companies. It is necessary to consider the evaluation system suitable for the domestic environment instead of reflecting the overseas evaluation system as it is. The purpose of this study is as follows. First, we will present the problems of the existing information security assessment system and the improvement direction of the information security assessment system through analysis of existing information security assessment system. Second, it analyzes the technical guidance for information security testing and assessment and the evaluation of information security management in the Special Publication 800-115 'Technical Guide to Information Security Testing and Assessment' of the National Institute of Standards and Technology (NIST). Third, we will build a framework to implement the evidence collection system and present a system implementation method for the '6. Information System Security' of 'information security management actual condition evaluation index'. The implications of the framework development through this study are as follows. It can be expected that the security status of the enterprises will be improved by constructing the evidence collection system that can collect the collected evidence from the existing situation assessment. In addition, it is possible to systematically assess the actual status of information security through the establishment of the evidence collection system and to improve the efficiency of the evaluation. Therefore, the management system for evaluating the actual situation can reduce the work burden and improve the efficiency of evaluation.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.26-32
• /
• 2015

This paper describes performance evaluation of design parameters, air velocity inside a pipeline and pressure along a pipeline, using experimental measurements in an automated vacuum waste collection system. Automatic robot having six cameras is introduced to analyze the internal pipeline conditions whether waste accumulates at the bottom of the pipeline or not. Throughout the experimental measurements of the pipeline having the various shapes, it is found that pressure and internal air velocity linearly increase along the pipeline from a waste inlet to a waste collection station while air density decreases due to the air compression effect with high pressure. Although air velocity inside the pipeline at a waste inlet keeps design velocity range between 20 m/s and 30 m/s, it is noted that air velocity near the waste collection station exceeds maximum design velocity of 30 m/s. Pressure increase per unit length is changed from 17.6 Pa/m to 18.9 Pa/m, which depends on the air velocity inside the pipeline. From the investigation inside the pipeline with CCTV loaded on an automated robot, waste accumulated at the bottom of the pipeline is mainly found at the downstream of a circular curved pipe, an inclined pipe and a bended pipe.

• 설비공학논문집
• /
• 제6권3호
• /
• pp.237-246
• /
• 1994

Experimental data are reported for charging and collection of NaCl aerosols in the 0.03- to $0.2{\mu}m$-geometric-mean-diameter range in 2-stage parallel-plate electrostatic precipitators. The NaCl aerosols are generated with geometric standard deviation of about 1.74 and particle generation rate of about 10^9 particles/see by the constant output atomizer and injected into the air flow in the clean wind-tunnel. The 2-stage parallel-plate electrostatic precipitator installed in the test section of the wind-tunnel is operated with a positive corona discharge. The NaCl aerosols in the channel flow are sampled and transported to the aerosol particle number concentration measurement system by using the isoaxial sampling and transport system constructed based on the Okazaki and Willeke design. The aerosol particle number concentration measurement system measures the size distribution of submicrometer aerosols by an electrical mobility detection technique. It is confirmed from comparing the measured collection efficiencies in this study and the predicted ones by our previous theoretical analysis that the predicted collection efficiencies agree well with the experimental ones. It is also found from the comparison that below about $0.02{\mu}m$ all particles are not charged and the uncharged particles are not collected, and consequently 2-stage parallel-plate electrostatic precipitators are not suitable for that particle size range.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권6호
• /
• pp.463-475
• /
• 2009

플래시 메모리는 일관된 성능, 저전력 및 내구성 등의 특징으로 인해 실시간 시스템에 적합한 저장장치로 주목 받고 있다. 하지만 플래시 메모리는 무효화된 페이지의 가비지 컬렉션 수행을 위한 정체 시간(blocking time)을 필요로 하는데, 기존의 플래시 메모리 관리 기법에서는 가비지 컬렉션을 위한 최대 정체 시간(worst case blocking time)과 최소 정체 시간(best case blocking time)의 차가 크다는 문제점이 있다. 본 논문에서는 KAST라 불리는 FTL(Flash Translation Layer)을 제안하며, 제안 시스템에서 사용자는 가비지 컬렉션에 따른 최대 정체 시간을 설정할 수 있도록 한다. 실험을 통해 KAST는 사용자가 설정한 시간 내 가비지 컬렉션을 완료하며, 기존 FTL 보다 10~15% 성능 향상을 보임을 확인한다.

• Mycobiology
• /
• 제44권4호
• /
• pp.269-276
• /
• 2016

Aspergillus luchuensis is known as an industrially important fungal species used for making fermented foods such as awamori and shochu in Japan, makgeolli and Meju in Korea, and Pu-erh tea in China. Nonetheless, this species has not yet been widely studied regarding mating-type genes. In this study, we examined the MAT1-1 and MAT1-2 gene ratio in black koji molds (A. luchuensis, Aspergillus niger, and Aspergillus tubingensis) and in Aspergillus welwitschiae isolated from Meju, a fermented soybean starting material for traditional soy sauce and soybean paste in Korea. The number of strains with the MAT1-1 locus was 2 of 23 (A. luchuensis), 6 of 13 (A. tubingensis), 21 of 28 (A. niger), and 5 of 10 (A. welwitschiae). Fungal species A. tubingensis and A. welwitschiae showed a 1 : 1 ratio of MAT1-1 and MAT1-2 mating-type loci. In contrast, A. luchuensis revealed predominance of MAT1-2 (91.3%) and A. niger of MAT1-1 (75%). We isolated and identified 2 A. luchuensis MAT1-1 strains from Meju, although all strains for making shochu in Japan are of the MAT1-2 type. These strains may be a good resource for breeding of A. luchuensis to be used in the Asian fermented-food industry.

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.277-287
• /
• 2019

This study analyzes the online issues of design innovation by a fashion creative director. The study selected fashion house Gucci as the main subject and analyzed social media posts. As for study methods, a social matrix program Textom 2.0 collected 13,014 nouns and adjectives using 'Gucci Collection' as a search keyword from Naver Blogs from March to August 2014 and from March to August 2016. Design related issues were derived through semantic network analysis using Ucinet6 and the NetDraw program. The results of the keyword frequency analysis showed that social media user interest for the Gucci collection increased based on the rapid increase in the number of posts from 1,064 to 2,126 after changing the fashion creative director. The results of visualization of semantic network analysis and content analysis also showed that the main issues related to the Gucci collection design changed after the replacement of the fashion creative director. The study found that issues formed around the product information worn by celebrities for promotion purposes during the 2014 period; however, during the 2016 period, issues were formed around 'vintage' and 'retro' runway concepts with design styles related to Alessandro Michele, the new creative director.

• 대한수학회지
• /
• 제40권6호
• /
• pp.921-932
• /
• 2003

A number of variants of Hofstadter's original sequence have been investigated. Here we investigate a collection of similarly defined such sequences which give rise to intriguingly different results.

• 대한설비공학회지:설비저널
• /
• 제22권6호
• /
• pp.411-416
• /
• 1993