• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.327-330
• /
• 2003

In this paper, a viscoelastic structural analysis for the spent pressurized water reactor(PWR) nuclear fuel disposal canister is carried out to predict the collapse of the canister while the canister is stored in a deep repository for long time. There may exist some subterranean heat in a deep repository while the nuclear fuel disposal canister is stored for long time. Then, a time-dependent viscoelastic structural deformation may occur in the canister due to the subterrnean heat Hence, the viscoelastic stress variation according to time should be computed to predict the structural strength of the canister. A viscoelastic material model is adopted. Analysis results show that even though some subterrnean heat may exist for quite a long time, the canister structure still endures stresses below the yield strength of the canister. Hence, some subterranean heat cannot seriously affect the structural strength of the canister.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1139-1146
• /
• 2009

Collapse of cut slope includes many uncertainties in view of the reason and time. So, in the past, risky cut slopes have been dealt after they've been collapsed through post-management measures. But recently, advanced disaster prevention system is required, and as a part of that RTMS(Real-Time Monitoring System) was developed. In this study, stability of risky cut slope was evaluated by site investigation. To grasp deformation behavior characteristics of slope, numerical analysis based on FEM was performed and using results of that, specific standards for installation of Real-Time Monitoring System were suggested.

• 한국지진공학회논문집
• /
• 제22권3호
• /
• pp.149-160
• /
• 2018

This study experimentally and analytically examines the seismic vulnerability of steel rack storage frames subjected to Korea earthquakes (2016 Gyeongju earthquake and 2017 Pohang earthquake). To achieve this aim, this study selects a three-story, one-bay steel rack frame with a typical configuration of rack frame in Korea. Firstly, the local behavior for frame components is examined by performing monotonic and/or cyclic load tests and the global response and dynamic characteristics of the subject rack frame are investigated by conducting a shaking table test. The analytical model of the rack frame is then created based on the experimental results and is used to perform nonlinear time history analyses with recorded Korea earthquakes. The seismic demand of the rack frame is considerably affected by the spectral acceleration response, instead of peak ground accelerations (peak floor accelerations). Moreover, the collapse fragility curve of the rack frame is developed using incremental dynamic analyses for the Gyeongju and Pohang earthquakes. Fragility results indicate that the ground motion characteristics of these earthquakes do not significantly affect the frame vulnerability at the collapse state.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1113-1118
• /
• 2010

차량의 내장부품 설계에 있어 내장 부품의 탑승자 보호를 위한 FMVSS 201 법규에 따른 FMH 충격성능 만족을 위한 충격흡수구조 설계 방법이 필요하다. 충격흡수구조 설계 과정에 있어 FMH 충격 성능은 헤드라이닝의 타격 위치 및 헤드폼의 접근각에 따라 위치별로 각각 다르게 설정되며, FMH 충격 흡수부재는 위치에 따른 차체의 강성 및 상관부품을 고려하여 각 타격 위치에 따른 적절한 충격 흡수 성능을 가져야 하며 차체 강성의 변화를 고려한 효율적인 설계 방법이 필요하다. 본 연구에서는 충격 흡수구조 설계 과정에 있어 초기 설계안에 대한 충격 강도 검토의 시간을 줄이기 위해 전차량 시뮬레이션에서 수행하던 FMH 충격흡수부재 설계를 단위 모델의 압궤 시뮬레이션을 통해 진행함으로써 보다 빠르고 효율적으로 타격 위치별 적합한 충격 흡수구조를 설계하는 방법을 검토하였다.

• 한국지반환경공학회 논문집
• /
• 제2권1호
• /
• pp.57-65
• /
• 2001

본 연구에서는 증축하천제방의 침투거동과 안정성을 평가하기 위하여, 증축부의 투수계수와 홍수시 강우로 인한 수위상승속도를 3가지 경우로 변화시켜 가면서 평행흐름조건에서 침투모형실험과 유한요소해석을 통한 침윤선 변화와 홍수직후의 수위급상승시 제체사면의 안정성을 분석하여 제체침식에 대한 사면의 불안정성을 검토하였다. 침투모형실험은 평행흐름조건에서 서로 다른 증축재료의 투수계수 $k_1$, $k_2$, $k_3$와 홍수시 발생 가능한 수위상승속도 $v_1$, $v_2$, $v_3$를 각각 변화시키며 수행되었다. 증축체제의 침투거동은 증축부의 투수계수가 클수록 초기 침투거리가 길고, 제체하류사면에 유출점이 점차로 상승하며 시간에 따른 안전율이 감소하면서 국부적인 붕괴로 이어지는 불안정한 침투거동을 보여준다. 또한, 제체사면의 붕괴양상은 수위상승속도가 증가할수록 붕괴발생높이와 붕괴깊이가 증가함을 보여준다.

• Structural Engineering and Mechanics
• /
• 제83권3호
• /
• pp.327-340
• /
• 2022

The Collapse Margin Ratio (CMR) is a notable index used for seismic assessment of the structures. As proposed by FEMA P695, a set of analyses including the Nonlinear Static Analysis (NSA), Incremental Dynamic Analysis (IDA), together with Fragility Analysis, which are typically time-taking and computationally unaffordable, need to be conducted, so that the CMR could be obtained. To address this issue and to achieve a quick and efficient method to estimate the CMR, the Artificial Neural Network (ANN), Response Surface Method (RSM), and Adaptive Neuro-Fuzzy Inference System (ANFIS) will be introduced in the current research. Accordingly, using the NSA results, an attempt was made to find a fast and efficient approach to derive the CMR. To this end, 5016 IDA analyses based on FEMA P695 methodology on 114 various Reinforced Concrete (RC) frames with 1 to 12 stories have been carried out. In this respect, five parameters have been used as the independent and desired inputs of the systems. On the other hand, the CMR is regarded as the output of the systems. Accordingly, a double hidden layer neural network with Levenberg-Marquardt training and learning algorithm was taken into account. Moreover, in the RSM approach, the quadratic system incorporating 20 parameters was implemented. Correspondingly, the Analysis of Variance (ANOVA) has been employed to discuss the results taken from the developed model. Additionally, the essential parameters and interactions are extracted, and input parameters are sorted according to their importance. Moreover, the ANFIS using Takagi-Sugeno fuzzy system was employed. Finally, all methods were compared, and the effective parameters and associated relationships were extracted. In contrast to the other approaches, the ANFIS provided the best efficiency and high accuracy with the minimum desired errors. Comparatively, it was obtained that the ANN method is more effective than the RSM and has a higher regression coefficient and lower statistical errors.

• Journal of Korea Trade
• /
• 제23권8호
• /
• pp.1-26
• /
• 2019

Purpose - This paper investigates the recent trade collapse, recovery, and prolonged slowdown to shed light on the discussions about whether the current slowdown is structural or cyclical. I examine structural, cyclical, and heterogeneous aspects of the recent trade trends using detailed statistics of a small open economy, South Korea, whose economic success and growth have been heavily dependent on exports. Design/methodology - I use both aggregated and disaggregated trade statistics of South Korea. I apply the following methodologies: 1) I decompose the trade growth into the extensive and the intensive margin and observe the effect of prices over time. 2) I estimate the trade-income elasticities focusing on the world's import demand, separately for goods from the world and from Korea. 3) I compare the drop in goods exports in slowdown and trade collapse, which are the two unusual periods in the recent history when world trade has substantially dropped altogether. Findings - I show that while the last drop of trade after 2015 has cyclical aspects, there is evidence that the continued slowdown from 2012 is structural: 1) the so-called 'China factor' is found in the analysis of trade-income elasticity of the world and China for imports from Korea. 2) The bilateral trade barriers between Korea and its principal trading partners are universally tightening. 3) Firm sizes, destination countries, and the mode of transactions affect disaggregated trade flows during the slowdown periods. Originality/value - This paper contributes to the debate regarding whether the current trade slowdown is structural or cyclical. I provide two concrete evidence that the export drop in 2015 stems from low oil prices: one is the divergence of Korean export value index from its export quantity index, which started in late 2014 when oil prices plunged. I also contribute to the literature by providing evidence that Korea's trade barriers with important trading partners are steadily increasing since 2012 as the protectionist measures toward Korea's export products are steeply increasing after the global financial crisis.

• Geomechanics and Engineering
• /
• 제36권3호
• /
• pp.303-316
• /
• 2024

Seismic records are composed of mainshock and a series of aftershocks which often result in the incremental damage to underground structures and bring great challenges to the rescue of post-disaster and the repair of post-earthquake. In this paper, the repetition method was used to construct the mainshock-aftershocks sequence which was used as the input ground motion for the analysis of dynamic time history. Based on the Daikai station, the two-dimensional finite element model of soil-station was established to explore the failure process of station under different seismic precautionary intensities, and the concept of incremental damage of station was introduced to quantitatively analyze the damage condition of structure under the action of mainshock and two aftershocks. An arc rubber bearing was proposed for the shock absorption. With the arc rubber bearing, the mode of the traditional column end connection was changed from "fixed connection" to "hinged joint", and the ductility of the structure was significantly improved. The results show that the damage condition of the subway station is closely related to the magnitude of the mainshock. When the magnitude of the mainshock is low, the incremental damage to the structure caused by the subsequent aftershocks is little. When the magnitude of the mainshock is high, the subsequent aftershocks will cause serious incremental damage to the structure, and may even lead to the collapse of the station. The arc rubber bearing can reduce the damage to the station. The results can offer a reference for the seismic design of subway stations under the action of mainshock-aftershocks.

• 한국농공학회지
• /
• 제44권3호
• /
• pp.92-100
• /
• 2002

The advent or high-strength steel has enabled the arch structures to be relatively light, durable and long-spanned by reducing the cross sectional area. On the other hand, the possibility of collapse may be increased due to the slender members which may cause the stability problems. The limit analysis to estimate the ultimate load is based on the concept of collapse mechanism that forms the plastic zone through the full transverse sections. So, it is not appropriate to apply it directly to the instability analysis of arch structures that are composed with compressive members. The objective of this study is to evaluate the ultimate load carrying capacity of the parabolic arch by using the elasto-plastic finite element model. As the rise to span ratio (h/L) varies from 0.0 to 0.5 with the increment of 0.05, the ultimate load has been calculated fur arch structures subjected to uniformly distributed vertical loads. Also, the disco-elasto-plastic analysis has been carried out to find the duration time until the behavior of arch begins to show the stable state when the estimated ultimate load is applied. It may be noted that the maximum ultimate lead of the parabolic arch occurs at h/L=0.2, and the appropriate ratio can be recommended between 0.2 and 0.3. Moreover, it is shown that the circular arch may be more suitable when the h/L ratio is less than 0.2, however, the parabolic arch can be suggested when the h/L ratio is greater than 0.3. The ultimate load carrying capacity of parabolic arch can be estimated by the well-known formula of kEI/L$^3$where the values of k have been reported in this study. In addition, there is no general tendency to obtain the duration time of arch structures subjected to the ultimate load in order to reach the steady state. Merely, it is observed that the duration time is the shortest when the h/L ratio is 0.1, and the longest when the h/L ratio is 0.2.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.745-748
• /
• 2008

과거 건설 구조물은 사용 하중을 견딜만한 성능과 사용성, 부식에 대한 저항성 정도만이 요구되었다. 그러나 9.11 사건 이후 이러한 관점은 바뀌어, 폭발에 의한 충격 하중 및 그와 동시에 발생할 수있는 화재로 인한 열에 견딜 수 있는 구조물의 저항 성능이 기본적인 요구 조건으로써 중요시되고있다. 전 세계가 연일 테러의 위협 아래 놓여있는 현 시점에서 구조물의 내폭 성능은 매우 중요한 부분이라 할 수 있다. 이에 본 연구에서는 기존의 건설 재료로써 폭넓게 사용되고 있는 시멘트 복합체 혹은 콘크리트에인장 강도 및 연성이 뛰어난 FRP composite을 결합시켜 내폭 성능이 우수하고 기존 구조물 및 신설구조물에 모두 시공이 가능한 최적화된 분절 복합체(Segmented Composite) 및 층 구조(Layered Structure)를 개발하고, 그 성능을 평가하고자 한다. 이러한 내폭 성능의 향상을 통해, 열과 충격 하중, 동하중 및 high strain에 의한 구조물의 붕괴를 줄이고 붕괴 시점을 보다 늦출 수 있다면, 이로인해 발생되는 인명 피해 및 경제적 손실을 최소화시킬 수 있을 것이다.