• 대한통합의학회지
• /
• 제1권2호
• /
• pp.13-22
• /
• 2013

Purpose : The purpose of the research is that get a cut above clinical practice effect through satisfaction of clinical training, practical training, content, oversight of training and evaluation system. Clinical training consists of part of university in Gwang Ju and Jeon nam. Method : The target of training student was studying at physiotherapy a tree or four-year-course collage in Gwang ju and Jean nam. Data collection period is from 21 November 2012 to 1 February. We explained how to do a means of collecting data and get students consent fill in questionnaire. Data collection prossed by using spss 10.1 program also independent proofs, descriptive statistics, crosstabulation, regression analysis and frequency analysis. Results : The subjects average age is 24 in general characteristic. A school system of subjects was a tree-year-course students. They were 58people(39.1%). A school system of subjects was a four-year-course students. They were 90people(60.9%).The male was 72(48.6%) and the female was 76(51.4%). We researched to know about satisfaction of clinical training, practical training, content, environment of practical establishment, trainee manage and evaluation method. All-round satisfaction of clinical training average was 1.90 Satisfaction of clinical training period and content average was 1.83Satisfaction of environment of practical establishment average was 1.88 Satisfaction of clinical training establishments' trainee manage and evaluation average was 1.94 Conclusion : It is important that student can get specific their future and can do at clinical throught clinical training after their graduation improving satisfaction of clinical training would give to impact a physical therapist reserve.

• 패션비즈니스
• /
• 제22권2호
• /
• pp.51-60
• /
• 2018

This research focuses on the development of upcycled denim fashion designs, whichis a more specific category within general upcycled fashion design. Characteristics of upcycled fashion design, which has been identified previously by researchers, include the following traits: environmentality, uniqueness, aesthetic appeal, availability, convertibility, and deconstructivity. The expression principles include recycling, substitution, recombination, and reduction. The result of the analysis of the denim fashion design characteristics, which is based on the theoretical analysis, has found. The external expression pattern consists of the deconstruction and reconstitution of materials, the avant-garde style and convertibility, the ability to mix and match materials and techniques, the production of zero waste, and the use of layering. The expression techniques used included decomposition, depaysement, weaving, cut-off, collage, assemblage, overlapping, connecting, attaching, and stitching. The inner meanings were identified as economicality through recycling, convertibility through rearranging, and the rarity and value of hand-made products. The result of the research applying the identified characteristics are as follows. First, developing and creating designs using modified denim and sub-materials with various expression patterns and techniques could provide completely new images unlike existing denim products. Second, modifying the details while maintaining the basic format of denim clothing could provide unique and new possibilities for upcycled denim fashion design. Third, environment-friendly models with creative designs were developed by recycling used denim materials. This reduced waste and energy while maximizing the use of resources. This study expects contribute to upcycled fashion design research by recognizing the unique characteristics and value of denim material.

• 한국표면공학회지
• /
• 제47권3호
• /
• pp.128-136
• /
• 2014

In the present study, we successfully developed an eco-friendly chemical etching solution and proper condition for plating on ABS material. The mechanism of forming Ni plating layer on ABS substrate is known as following. In general, the etching solution used for the etching process is a solution of chromic acid and sulfuric acid. The etching solution is given to the surface resulting in elution of butadiene group, so-called anchor effect. Such a rough surface can easily adsorb catalyst resulting in the increase of adhesion between ABS substrate and Ni plating layer. However a use of chromic acid is harmful to environment. It is, therefore, essential to develop a new alternative solution. In the present study, we proposed an eco-friendly etching solution composed of potassium permanganate, sulfuric acid and phosphoric acid. This solution was testified to observe the surface microstructure and the pore size of electrical Ni plating layer, and the adhesive correlation between deposited layers fabricated by electro Ni plating was confirmed. The result of the present study, the newly developed, eco-friendly etching solution, which is a mixture of potassium permanganate 25 g/L, sulfuric acid 650ml/L and phosphoric acid 250ml/L, has a similar etching effect and adhesion property, compared with the commercially used chromium acid solution in the condition at $70^{\circ}C$ for 5 min.

• 한국주조공학회지
• /
• 제6권1호
• /
• pp.12-19
• /
• 1986

This study was undertaken to understand the formation mechanism of the hard spots in high strength brass. To investigate the behavior of the hard spots in the isothermal liquid state with varying silicon content, the rapidly quenched specimens were obtained by suctioning the melt into the silica tube and water quenching. To examine the growth process of the hard spots with holding time, the unidirectional solidification technique was used. The results of this study are summarized as follows: 1) With the addition of Fe in order to get the effects of grain refinement in high strength brass, the two different type of Fe-rich phases are occurred, which are defined as dendritic and globular phase. The chemical composition of the globular phase was different from that of the dendritic phase in that the globular phase contained Si. 2) With increasing Si content, the Fe-rich phase had a tendency to form globular phase. 3) As the holding time increased in the liquid state, globular was also prone to coalesce. The further growth of globular phase to large size was due to reducing the interfacial energy. 4) The primary phase of copper alloy was nucleated preferentially on the dendritic phase. It was noticeable that the dendritic phase acted as a grain refiner. However, the agglomerate (hard spots) which was composed of the globular phase decreased the mechanical properties of high strength brass. 5) Once the hard spots formed in the high strength brass casting, it was very difficult to remove them. This is due to the fact that their meting temperature is higher than the pouring temperature of high strength brass.

• 한국주조공학회지
• /
• 제15권3호
• /
• pp.272-282
• /
• 1995

Iron-based metal matrix composites have been recently investigated for the use of inexpensive abrasion resistance material. This paper carried out to investigate the in-situ reaction effects on the microstructural characteristics and the formation mechanism of tungsten carbides in a white cast iron matrix. The specimens of Fe-3.2%C-2.8%Si alloy cast-bonded with tungsten wire were cast in the metal mold and isothermally heat treated at $950^{\circ}C$ up to 48 hours. The typical microstructure of heat treated specimens showed the reaction layer of WC at the interface of tungsten wire and the carbon depletion zone between the WC layer and the matrix. During the formation of WC layer, if the carbon supply is insufficient due to the decarburization of matrix or the isolation of matrix by cast-bonded W wires, the reaction layer develops coarse hexagonal crystalline WC. From the microstructural investigation, it was found that the volume of WC layer and the carbon depletion zone increased linearly with the isothermal heat treating time. This results supported that the formation rate of WC in the white cast iron matrix is controlled by the interfacial reaction with a constant reaction rate.

• 한국게임학회 논문지
• /
• 제5권4호
• /
• pp.3-12
• /
• 2005

미디어 영상, 예술 분야에서의 표현 특징들 중 초현실주의의 표현 기법을 이용한 많은 작품이 출시되고 있으며 이에 대한 연구가 시작 진행되고 있다. 그러나 아직 게임 캐릭터의 표현 특징 중 초현실주의의 표현 특징에 관한 연구는 거의 전무한 상태이다. 따라서 본 논문에서는 초현실주의에서의 표현 기법을 중심으로 판타지 게임 캐릭터의 표현 특징을 분석하였다. 그 결과, 초현실주의에서는 신체의 일부와 동물 또는 다른 사물을 꼴라쥬 하는 형태와 변형, 그리고 왜곡을 이용하여 현실에 존재하지 않는 이미지들을 표현하였는데 이러한 방법들은 판타지를 기반으로 한 온라인 게임 캐릭터에서도 유사하게 사용되었다. 본 논문은 미학적 맥락 속에서 판타지 게임 캐릭터들의 특징을 분석하여 현 시대 문화적 배경 속에 게이머들의 심리를 이해하여 보다 호감 있고 창조적인 게임 캐릭터 제작에 도움을 주며, 예술 기법 활용의 가능성을 증가시켜 창의적인 게임 그래픽 제작의 가능성을 여는데 의미가 있다.

• 한국지반공학회지:지반
• /
• 제5권4호
• /
• pp.37-46
• /
• 1989

본 논문은 반복하중을 받는 과추밀 실트질 점토의 일반적 특성에 관한 연구로서 재성형 시료를 과압밀 상태로 제작하여 일련의 변형-제어 반복 삼축시험을 수행하였다. 일반적으로 단일하중의 경우에 과압밀점토의 축차응력-축변형률 관계는 그 형태에 있어 정규압밀점토의 결과와 흡사하지만, 반복하중을 받게 쾨면 시료 내의 간극수압 거동은 시료의 압밀리력 과 반복응력의 크기에 따라 변화하게 된다. 그러므로 서로 다른 과압밀비를 가진 시료에 대한 반복 하중시험 결과를 통하여 나타난 일반적 응력-변형 특성에 관하여 상호 비교 분석하고,이들의 종합적인 관계로부터 변형 및 강도 특성을 찾고자 하였다. 또한 시료가 평형상웅로 존재할 수 있는 반복응력의 한계치를 의미하는 직선 혹은 곡선형태의 평형상태선을 결정하고 과압밀비 의 변화에 따른평형상태선의 경향을 관찰하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권5호
• /
• pp.241-248
• /
• 1999

Recently, many linear motion generators and motors are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic cone type loudspeakers to stirling engine driven linear reciprocating alternators, compressors, textile machines etc. The stroke-length may go up to 2m, and the maximum speed is in the range of 5 to 10m/s with oscillating frequency as high as 15 kHz. Therefore, the linear oscillating actuators(LOAs) may be considered as variable speed drivers of precise controller with stoke-length and reversal periods during the reciprocating motion. In this paper, the design, fabrication, experiments, and extraction of control parameters of a moving coil type LOA for driving of linear reciprocating motion control systems, are treated. The actuator consists of the NdFeB permanent magnets with high specific energy as the stator produced magnetic field, a coil-wrapped nonmagnetic hollow rectangular bobbin structure, and an iron core as a pathway for magnetic flux. Actually, the design is accomplished by using FEM analysis for the basic configuration of a magnetic circuit, and characteristic equations for coil design. In order to apply as the drivers of a linear motion reciprocating control system, the control parameters and circuit parameters, such as input voltage-stoke, exciting frequency-stoke, coil inductance and so on, are extracted from the analysis and experiments on concerning a fabricating LOA.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.27-32
• /
• 2004

Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A method for determining the dielectric relaxation time ${\tau}$ of floating 'monolayers on the water surface is presented. MDC floing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time ${\tau}$ of monolayers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area Am. Compression speed a was about 30,40,50mm/min. LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film.The physicochemical properties of the LB films were examined by UV absorption spectrum, SEM and AFM. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 3~9. Also, we then examined of the MIM device by means of I-V characteristic of the device is measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• 한국수자원학회논문집
• /
• 제30권2호
• /
• pp.143-154
• /
• 1997

이송항에는 5차 보간다항식을 사용하는 Holly-Pressmann 기법을, 확산항에는 Hobson 등이 제안한 양해법을 사용하는 연산자 분리기법을 사용하여 1차원 이송-확산방정식의 수치모형을 제안하였다. 제안된 모형을 검정하기 위하여 일정한 유속과 종확산계수를 갖는 순간적으로 부하된 오염원의 경우와 상류단에 연속적인 오염원을 갖는 경우에 대하여 본 모형의 해를 해석해와 기존의 모형으로부터 구한 해를 비교검토하였다. Courant 수와 Peclet 수를 가진 경우에 대한 수치해석을 통하여, 본 모형이 Courant 수가 1보다 큰 경우에 대해서도 안정된 해를 제공함을 알 수 있었으며, 해석해가 존재하는 경우에 본 모형을 적용하여 얻은 수치해와 비교한 바 전반적으로 잘 일치하였다. 본 모형의 확산항에 사용된 양해법에서는 일반적인 양해법의 단점인 계산시간간격의 제약이 상당히 완화되어 상대적으로 큰 계산시간간격에 대해서도 양호한 결과를 보였다.