• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.314-319
• /
• 2007

The aims of this work were to compare the effects of dehairing methods and sex on pork quality and cold storage stability. For this study, one half of40 pigs were dehaired by scalding in the same abattoir, and the other half by dehiding. Each treatment consisted of one half gilts and one half castrated male pigs. Meat quality traits were measured at 24 hr after slaughter, and thiobarbituric acid (TBA), metmyoglobin contents and total plate counts (TPC) were evaluated at 1, 7, 14 and 21 days of cold storage. The carcass weight and backfat thickness of pigs dehaired by scalding were significantly higher than those dehided (p<0.05). Compared to scalded carcasses, dehided carcasses had a lower longissimus dorsi muscle temperature (p<0.05). Furthermore, dehided carcasses had significantly lower drip loss than scalded carcasses (p<0.05). However, meat color parameters were not affected by the dehairing method. During cold storage, TBA values of scalded carcasses were slightly higher initially, whereas the dehided carcasses had higher TBA values at 21 days (p<0.05). The total plate counts (TPC) associated with scalding and dehiding treatment were not significantly different at any point during cold storage. The TPC exponentially increased in both scalded and dehided carcasses from 7 to 14 days of cold storage.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.672-679
• /
• 2006

Postharvest nut quality, and changes of soluble solids content and kernel hardness during cold storage in 13 Korean prevailing chestnut cultivars were investigated to establish the chestnut grading and standardization for marketing and processing industry. Chestnut quality attributes such as nut weight, soluble solids content, kernel hardness, % with the pericarp split, and % of polyembryonic nuts were measured from 2001 to 2005. There were significant difference among cultivars in quality characteristics, and also annual variation within same cultivar, corresponded to the high genetic and environmental variability. During cold storage at $2^{\circ}C$ for 16 weeks, remarkable changes in soluble solids content were observed, and Isseumo showed the highest increase of 8% at 16 weeks of cold storage compared with postharvest. In case of most cultivars except early ripening cultivars, soluble solids content of chestnut increased until 12 weeks during cold storage, followed by decreased gradually thereafter. Kernel hardness of most cultivars except lshizuchi during cold storage increased slightly, but it was not statistically significant. This work would be a useful reference to the quality of each chestnut cultivar for the growers and breeders alike.

• Development and Reproduction
• /
• v.7 no.1
• /
• pp.9-13
• /
• 2003

A series of experiments were conducted to compare the effects of various diluents in cold storage on the sea urchin, Hemicentrotus pulcherimus sperm. Various diluents of glucose solutions, artificial sea water(ASW) and 50% ASW were used to store the sperm at 4$^{\circ}C$. The storage effect was evaluated using sperm activity index(SAI), survival rate of sperm and fertilization rate to egg. ASW and 1.2 M glucose were found to be better diluents which maintained high motility and survival rate of sperm f3r a storage period of 30 days. Optimal pH of diluent to store the sperm at 4$^{\circ}C$ is 7.0∼8.0. In order to keep high SAI and survival rate of sperm, addition of 400 ppm neomycin into the diluent revealed the best storage results.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.990-995
• /
• 2009

Experimental basic study was performed to understand the characteristics of sub-cooled refrigerant using a cold heat storage system. This system was made up general vapor-compression refrigeration cycle added sub-cooler and ice storage tank. The purpose of this study are to application use of cold-heat storage systems multiplicity of fields and to understand of sub-cooling system. At the condition using ice storage system, the ice making process was operated during night time by electric power. And then, the refrigerant was sub-cooled using stored cold-heat after being discharged from the air cooling condenser during the day time. Comparing the result at general operation with the operation using sub-cooling system. This study showed the effects of the sub-cooled degree. The cooling performance was increased owing to the sub-cooling of refrigerant during day time, and the compressor consume power was a little decreased. Thus the COP was also increased owing to the sub-cooling of refrigerant.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.517-522
• /
• 2005

A cold storage refrigerator using phase change material(PCM) has been developed and its performance test results are provided here. The inner temperature of the refrigerator is controlled with forced convection driven by a fan using a DC battery. At the first, to freeze all the PCM of the ambient temperature by a built-in refrigerating machine, it took about 8 and 10 hours respectively at the refrigerator and the freezer mode. Then, without external power supply, the inner temperature of the cold storage refrigerator has been maintained at $-18{\pm}1^{\circ}C$ during 14 hours at the freezer mode and maintained at $3{\pm}^{\circ}C$ during 34 hours at the refrigerator mode. Just after the end of its valid usage as a refrigerator or a freezer, it took about 6 hours to refreeze the PCM for its reuse. During the test, the ambient temperature was kept at $30^{\circ}C$.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1261-1266
• /
• 2008

Experimental study was performed to understand the operations of a showcase working in a discount store. Temperatures of evaporation, condenser were measured and also electric power consumption of compressor were measured. The purpose of this study is to application use of cold-heat storage systems operated the showcase. At the condition using ice storage system, the ice making process was operated during midnight being not needed the cooling of the showcase through the continuous running of the condenser unit. And then, the refrigerant was sub-cooled using stored cold-heat after being discharged from the air cooling condenser during the day time. The cooling performance was increased owing to the sub-cooling of refrigerant during day time, hence the running time of the compressor was effectively decreased. In other words, this study showed that power consumption during daytime can be transferred to the midnight for making use of the refrigerant sub-cooling. So the operating characteristics of the showcase system under various working conditions were analyzed and discussed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.205-214
• /
• 1999

The objective of this paper is to investigate the thermal properties of TMA clathrate compound applicable to cold storage system for building air-conditioning. Especially, the test tube experiments are performed by comparing and analyzing the temperature of phase change, specific heat and subcooling characteristic according to the variation of density, temperature of heat source and charging quantity in TMA clathrate compound. The results are summarized as follows:1) $-15^{\circ}C$ is not proper as the temperature of heat source because the temperature of subcooling is above $8.3^{\circ}C$ 2) temperature of phase change is dropped as the temperature of heat source is lower, 3) the effect of subcooling suppression with about 8$^{\circ}C$ is confirmed when the temperature of heat source is $-10^{\circ}C$ in case of 26, 27, and 30wt%, while the temperature of subcooling is about $0^{\circ}C$ when the temperature of heat source is $-15^{\circ}C$ in case of 25, 26 and 30wt%. Thus, the effect of subcooling suppression is greater as the temperature of heat source is lower. Additionally, the concentrative study is needed on mass concentration causing the phase change without subcooling phenomenon when the temperature of heat source is $-15^{\circ}C$. Thus, it is concluded that TMA clathrate compound has enough thermal properties as the cold storage medium for building air-conditioning.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.8
• /
• pp.725-734
• /
• 2000

The objective of this paper is to investigate the thermal properties of TMA clathrate applicable to cold storage system for building air-conditioning. Especially, the test tube experiments are peformed by comparing and analyzing the temperature of phase change, specific heat and subcooling characteristic according to the variation of concentrations and temperature of heat source in TMA clathrate. The results are summarized as follows; 1) temperature of phase change is dropped as the temperature of heat source is lower, 2) the effect of subcooling suppression with about $9.3^{\circ}C$ is confirmed when the temperature of heat source is $-10^{\circ}C$ in case of 30wt%, while the temperature of subcooling is about $0^{\circ}C$ when the temperature of heat source is $-15^{\circ}C$ in case of 25, 29wt% and 30wt% . Thus, the effect of subcooling suppression is greater as the temperature of heat source is lower. Additionally, the concentrative study is needed on mass concentration causing the phase change without subcooling phenomenon when the temperature of heat source is $-15^{\circ}C$ Thus, it is concluded that TMA clathrate has proper properties as the cold storage medium for building air-conditioning.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.221-232
• /
• 2023

Recently, due to the expansion of the logistics industry, demand for logistics automation equipment is increasing. The modern logistics industry is a high-tech industry that combines various technologies. In general, as various technologies are grafted, the complexity of the system increases, and the occurrence rate of defects and failures also increases. As such, it is time for a predictive maintenance model specialized for logistics automation equipment. In this paper, in order to secure the operational reliability of the ICT/Cold-Chain Unmanned Storage, a predictive maintenance system was implemented based on the LSTM model. In this paper, a server for data management, such as collection and monitoring, and an analysis server that notifies the monitoring server through data-based failure and defect analysis are separately distinguished. The predictive maintenance platform presented in this paper works by collecting data and receiving data based on RabbitMQ, loading data in an InMemory method using Redis, and managing snapshot data DB in real time. The predictive maintenance platform can contribute to securing reliability by identifying potential failures and defects that may occur in the operation of the ICT/Cold-Chain Unmanned Storage in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.109-117
• /
• 2014

A cold storage is a warehouse of a insulated building with cooling installations. It has many different types of cold rooms with temperatures below 0 degrees Celsius, and the sequential workflow such as receiving, picking and packing runs in that rooms. Recently, the cold storages have adopted RFID technology, and consequently, warehouse product management in them are becoming intelligent and network. However, information inconsistency in warehouses caused by physical and logical errors reduces reliability in the RFID cold storage management system and worsens their work efficiency. Therefore, it is necessary to develop an early detection system to identify errors. In this paper, we suggest a supervisory system detecting logical errors on business processes of the RFID cold storage. It is composed of a master supervisor and mobile supervisor. In the master supervisor, the manager can set the constraints conditions and get alerts, and in the mobile supervisor, the workers confirm and deal with these faults directly. The supervisory system improve reliability of the RFID cold storage management system by recognizing a failure to identify physically and logically using these constraint conditions. This paper shows that the supervisory system can reduce the average recovery time to improve reliability by decreasing the time for detecting and analyzing errors in the RFID cold storage management system.