• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.496-499
• /
• 2014

Xe Gas is moved to Target from GPM. It is Used to feasible nuclear reaction from proton of 30MeV Cyclotron being investigated by the Xe-124 Gas target System. This system is divided into four parts. Hardware was constructed by solidworks and Helium Supply is to cool the Havor Foil. Water has the job of cooling down the temperature when Xe Gas is being investigated in the target. Temperature and pressure gauges are attached to be checked easily. GPM(Gas Process Manifold) has the part that prepares to transport Xe Gas. There are Storage Vessel that stores Xe Gas, the cold trap that filters humidity and impurity and lastly storage vessel that temporarily stores Xe Gas. HCS(Helium Circulation System) using the Helium to cleaning and cooling. these parts are used to SIEMENS PLC and Pcvue Program. Because It is more comfortable and easy maintenance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1528-1539
• /
• 2019

Objective: To evaluate the effects on microbial diversity and biochemical parameters of gradually increasing temperatures, from $5^{\circ}C$ to $25^{\circ}C$ on corn silage which was previously fermented at ambient or low temperature. Methods: Whole-plant corn silage was fermented in vacuum bag mini-silos at either $10^{\circ}C$ or $20^{\circ}C$ for two months and stored at $5^{\circ}C$ for two months. The mini-silos were then subjected to additional incubation from $5^{\circ}C$ to $25^{\circ}C$ in $5^{\circ}C$ increments. Bacterial and fungal diversity was assessed by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) profiling and biochemical analysis from mini-silos collected at each temperature. Results: A temperature of $10^{\circ}C$ during fermentation restricted silage fermentation compared to fermentation temperature of $20^{\circ}C$. As storage temperature increased from $5^{\circ}C$ to $25^{\circ}C$, little changes occurred in silages fermented at $20^{\circ}C$, in terms of most biochemical parameters as well as bacterial and fungal populations. However, a high number of enterobacteria and yeasts (4 to $5\;log_{10}$ colony forming unit/g fresh materials) were detected at $15^{\circ}C$ and above. PCR-DGGE profile showed that Candida humilis predominated the fungi flora. For silage fermented at $10^{\circ}C$, no significant changes were observed in most silage characteristics when temperature was increased from $5^{\circ}C$ to $20^{\circ}C$. However, above $20^{\circ}C$, silage fermentation resumed as observed from the significantly increased number of lactic acid bacteria colonies, acetic acid content, and the rapid decline in pH and water-soluble carbohydrates concentration. DGGE results showed that Lactobacillus buchneri started to dominate the bacterial flora as temperature increased from $20^{\circ}C$ to $25^{\circ}C$. Conclusion: Temperature during fermentation as well as temperature during storage modulates microorganism population development and fermentation patterns. Silage fermented at $20^{\circ}C$ indicated that these silages should have lower aerobic stability at opening because of better survival of yeasts and enterobacteria.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.596-602
• /
• 2020

Blending process of adhesive production has a cooling process to cool down the temperature of the solution which was heated up to 76 ℃ with a mineral insulated (MI) cable by 30 ℃ at room temperature. Using a MI cable in the adhesive production process makes the production inefficient because it takes about 10 h for the cooling process. If a jacketed vessel is used instead of the MI cable, it would shorten the cooling downtime without any additional cooling system by using cold water. However, there are various types of jacketed vessels, and thus the most suitable type should be found before set up. In this study, we designed the optimized jacketed vessel for the adhesive production process by calculating the cooling downtime, which impacts production efficiency, as a function of the jacket types using computational fluid dynamics. As a result, the cooling performance of the plain jacket was 32.7% superior to that of the half-pipe coil jacket with the same height. In addition, the plain jacket with 60% spiral baffle reduced the cooling downtime and operating time by 80.4% and 25.1%, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.79-88
• /
• 2011

Adfreeze bond strength develops upon freezing of pore water within soil and at foundation surface. It has been reported that various factors like temperature, soil type, and pile surface roughness affect adfreeze bond strength. Especially, pile surface roughness has been considered as a primary factor to design pile foundation in frozen ground. It has usually been estimated with fixed correction factors for pile materials. However, even if the pile foundation material is the same, the surface roughness could vary depending on the production circumstances. In this study, laboratory test was carried out to quantitatively analyze the effects of surface roughness on the adfreeze bond strength, and fractal dimension was used as a measure for surface roughness. Test results showed that adfreeze bond strength increased with decreasing temperature, increasing vertical stress and surface roughness. The adfreeze bond strength varies sensitively with surface roughness in the early freezing section of $-2^{\circ}C$, but its sensitivity decreased in the temperature ranging between $-2^{\circ}C$ to $-5^{\circ}C$. The results conclude that the roughness highly affects the frictional resistance of pile surface in frozen ground; however, the roughness does not affect considerably when the temperature drops below about $-2^{\circ}C$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.135-144
• /
• 2021

In this study, we investigated the characteristics of the process of hydrogen production using boil-of gas (BOG) generated from an LNG-fueled ship and the application of hydrogen fuel cell systems as auxiliary engines. In this study, the BOG steam reformer process was designed using the UniSim R410 program, and the reformer outlet temperature, pressure, and the fraction and consumption of the product according to the steam/carbon ratio (SCR) were calculated. According to the study, the conversion rate of methane was 100 % when the temperature of the reformer was 890 ℃, and maximum hydrogen production was observed. In addition, the lower the pressure, the higher is the reaction activity. However, higher temperatures have led to a decrease in hydrogen production owing to the preponderance of adverse reactions and increased amounts of water and carbon dioxide. As SCR increased, hydrogen production increased, but the required energy consumption also increased proportionally. Although the hydrogen fraction was the highest when the SCR was 1.8, it was confirmed that the optimal operation range was for SCR to operate at 3 to prevent cocking. In addition, the lower the pressure, the higher is the amount of carbon dioxide generated. Furthermore, 42.5 % of the LNG cold energy based on carbon dioxide generation was required for cooling and liquefaction.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.23-29
• /
• 2022

Although tropical cyclones with wind speeds weaker than 17 ms^-1 (weak tropical cyclones: WTCs) can cause significant damage, particularly over the Seoul metropolitan area, only a few studies have focused on WTC activity over South Korea. In this study, we found that WTC activity is likely associated with the Pacific Decadal Oscillation (PDO). During the negative phases of the PDO, landfall frequency of WTCs increased significantly compared to the positive phases at 95% confidence level. When related to the negative phases of the PDO, a positive relative vorticity anomaly is found in the northern sector of the western North Pacific while a negative relative vorticity anomaly and enhanced vertical wind shear prevail in the southern sector of the WNP. These factors are favorable for the northward shift of the genesis location of tropical cyclones on average, thereby reducing the total lifetime of WTCs. Moreover, a high-pressure anomaly over the Japanese islands would shift a tropical cyclone track westward in addition to the landfall location. Consequently, the effects of the topographical friction and the Yellow Sea Bottom Cold Water on a tropical cyclone may increase. These conditions could result in a weaker lifetime maximum intensity and landfall intensity, ultimately resulting in WTCs becoming more frequent over South Korea during the negative phases of the PDO.

• Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.277-286
• /
• 2021

Background: As trade increases, the influx of various alien species and their spread to new regions are prevalent and no longer a special problem. Anthropogenic activities and climate changes have made the distribution of alien species out of their native range common. As a result, alien species can be easily found anywhere, and they have nothing but only a few differences in intensity. The prevalent distribution of alien species adversely affects the ecosystem, and a strategic management plan must be established to control them effectively. To this end, hot spots and cold spots were analyzed according to the degree of distribution of invasive alien plants, and major environmental factors related to hot spots were found. We analyzed the 10,287 distribution points of 126 species of alien plants collected through the national survey of alien species by the hierarchical model of species communities (HMSC) framework. Results: The explanatory and fourfold cross-validation predictive power of the model were 0.91 and 0.75 as AUC values, respectively. The hot spots of invasive plants were found in the Seoul metropolitan area, Daegu metropolitan city, Chungcheongbuk-do Province, southwest shore, and Jeju island. Generally, the hot spots were found where the higher maximum temperature of summer, precipitation of winter, and road density are observed, but temperature seasonality, annual temperature range, precipitation of the summer, and distance to river and sea were negatively related to the hot spots. According to the model, the functional traits accounted for 55% of the variance explained by the environmental factors. The species with higher specific leaf areas were more found where temperature seasonality was low. Taller species preferred the bigger annual temperature range. The heavier seed mass was only preferred when the max temperature of summer exceeded 29 ℃. Conclusions: In this study, hot spots were places where 2.1 times more alien plants were distributed on average than non-hot spots (33.5 vs 15.7 species). The hot spots of invasive plants were expected to appear in less stressful climate conditions, such as low fluctuation of temperature and precipitation. Also, the disturbance by anthropogenic factors or water flow had positive influences on the hot spots. These results were consistent with the previous reports about the ruderal or competitive strategies of invasive plants instead of the stress-tolerant strategy. The functional traits are closely related to the ecological strategies of plants by shaping the response of species to various environmental filters, and our result confirmed this. Therefore, in order to effectively control alien plants, it is judged that the occurrence of disturbed sites in which alien plants can grow in large quantities is minimized, and the river management of waterfronts is required.

• Herbal Formula Science
• /
• v.30 no.2
• /
• pp.45-57
• /
• 2022

Objectives : Yukil-san (YIS, 六一散; Liu yi san) is composed of Talcum and Glycyrrhizae Radix, the name is said to be derived from the proportion of the two herbal components of the formula. The YIS originated from 'Formulas from the discussion illuminating the Yellow Emperor's Basic Question'(黃帝素問宣明論方; Huang di su wen xuan ming lun fang) written by Liu Wan-Su (劉完素). YIS could clear summerheat, resolve dampness, and augment the qi. This formula may be used to treat the common cold, influenza, acute gastroenteritis, cystitis, urethritis and bacillary dysentery. But, there is insufficient of study about the effects of YIS on the anti-inflammatory activities. The present study evaluated the anti-inflammatory effects of YIS on lipopolysaccharide (LPS)-activated RAW 264.7 cells. Methods : Cell viability was assessed by MTT assay and nitric oxide (NO) was evaluated by measuring the nitrite content in culture medium. Pro-inflammatory cytokines such as tumor necrosis factor-α, interleukin-1β and IL-6 were quantified by ELISA kit. The expression of proteins related with nuclear factor-κB (NF-κB) pathway and inducible NO synthase (iNOS) were assessed by western blot analysis. Results : YIS significantly inhibited the expression of iNOS increased by LPS, and thus significantly inhibited the production of NO. In addition, YIS significantly inhibited pro-inflammatory cytokines. In the regulation of inflammation, NF-κB pathway plays a crucial role. YIS inhibited the expression of p-IκBα and thus inhibited the translocation of NF-κB to the nucleus. Conclusions : These results suggest that YIS ameliorates inflammatory response in LPS-activated RAW 264.7 cells through the inhibition of inflammatory mediators, via suppression of the NF-κB pathway. Therefore, this study provides objective evidence for the anti-inflammatory effect of YIS including the underlying mechanisms.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.137-146
• /
• 2022

Seed disinfection is a necessary process to decrease Bakanae disease in rice and is carried out at 30℃ to increase disinfection efficiency. However, the length of sprout after seed disinfection is not suitable for sowing, so additional processes such as seed soaking is needed. For this reason, this study was conducted to develop the efficient and effective seed disinfection method. When the seed disinfection finished after soaking seeds in cold water for 2 days, length of sprout was about 1.0 mm and sowing can be done without additional processes. In addition, the incidence of Bakanae disease was greatly reduced by 64% compared to conventional method. In order to find out why the newly developed method (disinfection after soaking) is more efficient than conventional method, soaked and not soaked seeds were stained using methylene blue staining. It was found that soaked seeds were more easily stained with about 50% of internal and external endosperm stained. Therefore, pesticide can be absorbed easily into internal endosperm of soaked seeds and efficiently destroy the spore of pathogen. As a results of this study, newly developed method will be useful as it can improve efficiency of agricultural work and also effectively decrease Bakanae disease compared to conventional method.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.77-83
• /
• 2023

Energy consumption is increased by rapid industrialization. As a result, climate change is accelerating due to the increase in CO₂ concentration in the atmosphere. Therefore, a shift in the energy paradigm is required. Hydrogen is in the spotlight as a part of that. Currently 95% of hydrogen is fossil fuel-based reforming hydrogen which is accompanied by CO₂ emissions. This is called gray hydrogen, if the CO₂ is captured and emission of CO₂ is reduced, it can be converted into blue hydrogen. There are 3 technologies to capture CO₂: absorption, adsorption and membrane technology. In order to select CO₂ capture technology, the analysis of the exhaust gas should be carried out. The concentration of CO₂ in the flue gas from the hydrogen production process is higher than 20%if water is removed as well as the emission scale is classified as small and medium. So, the application of the membrane technology is more advantageous than the absorption. In addition, if LNG cold energy can be used for low temperature CO₂ capture system, the CO₂/N₂ selectivity of the membrane is higher than room temperature CO₂ capture and enabling an efficient CO₂ capture process. In this study, we will analyze the flue gas from hydrogen production process and discuss suitable CO₂ capture technology for it.