• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.108-113
• /
• 1998

In order to investigate the characteristics of top ring groove deposit formation in diesel engine, engine test and simulation test were performed. From component analysis of used oils sampled from actual running engines, soot content in engine oil was selected as a main parameter for evaluating oil degradation. Deposit formation is highly related to soot content in lubricating oils. And high soot content oil accelerates deposit formation even in low temperature region below 26$0^{\circ}C$. In low temperature region below 26$0^{\circ}C$, deposit formation rate is mainly affected by top ring groove temperature. However, in high temperature region above 26$0^{\circ}C$, deposit formation rate is affected by soot content as well as top ring groove temperature. Therefore, soot content as well as top ring groove temperature should be kept a certain level in order to prevent troubles due to carbon deposit formation.

• 에너지공학
• /
• 제6권2호
• /
• pp.152-161
• /
• 1997

석탄을 건류하여 코크스를 제조 시, 사용되는 석탄의 특성에 따른 적정 노온 관리를 통해서 에너지비용을 절감할 수 있을 뿐만 아니라 코크스로의 수명을 연장시킬 수 있다. 따라서 본 연구에서는 원료탄의 배합과 성상에 따른 코크스로 내의 열전달 및 온도 분포를 예측하기 위해서 Merrick의 모델을 배경으로 수학적 모델과 프로그램을 개발하였다. 본 연구에서 개발한 전산 모델을 광양 제철소의 코크스로에 적용하여 신뢰성을 확인함으로써 실제 공정의 조업 기준 설정과 기존 시설에 대한 개선 가능성을 판단할 수 있을 것으로 기대된다.

• Carbon letters
• /
• 제15권3호
• /
• pp.162-170
• /
• 2014

Pitch is an attractive raw material for carbon fiber precursors due to its low cost stemming from its availability as a residue of coking and petroleum processes. Ford Motor Company reported a carbon fiber target price of $11.0/kg by using a fast cycle-time manufacturing method with carbon fiber in an inexpensive format, allowing for an average retail price of gasoline of $3.58/gallon. They also recommended the use of carbon fiber with strength of 1700 MPa, modulus of 170 GPa, and 1.5% elongation. This study introduced a ca. $5.5{\mu}m$ carbon fiber with 2000 MPa tensile strength obtained from a precursor through simple distillation of petroleum residue. Petroleum pitch based carbon nanofibers prepared via electrospinning were characterized and potential applications were introduced on the basis of their large specific surface area and relatively high electrical conductivity.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2000년도 춘계임시총회 및 제16회 학술발표대회, 용융소각기술 특별심포지움
• /
• pp.19-144
• /
• 2000

막대한 에너지원을 갖고 있는 고분자 폐기물은 열분해에 의하여 오일화가 가능하며 이 오일은 대체 연료유로서 사용이 가능하다. 그러나 이 연료유를 생산하기 위해서는 폐플라스틱 및 폐타이어의 경우는 공정을 서로 달리하여야 이용이 가능하며 생성유의 유질에서도 다소 차이가 있다. 올레핀계가 함유된 폐플라스틱을 열분해 오일화 하기 위해서는 분해 촉매를 사용하여야 하며 열분해유는 경유분과 d사한 성상을 갖고 있으며 폐타이어의 열분해유는 유황성분 및 BTX 분을 상당량 함유하고 있어서 경유분과는 다소 다른 성상을 갖고 있다. 또한 폐타이어 및 폐플라스틱의 열분해 기술이 사용화되기 위해서는 열분해시 발생하는 Coking 문제 극복 및 시스템에 대한 설계기술이 뒷받침되어야 한다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.141-145
• /
• 1995

석탄액화반응의 촉진을 위하여 기존에 사용되어 온 담지촉매는 coking, metal deposition, pore plugging의 문제로 인하여 촉매의 활성을 지속적으로 유지할 수 없으며 고가이기때문에 최근에는 이러한 문제점을 보완할 수 있는 고분산 균일촉매에 관한 연구가 집중적으로 수행되고 있다. 그러나 분산촉매 중에서도 고활성을 나타내는 Mo, Ni, Co 성분은 고가이므로 이를 대체할 수 있는 촉매로서 값이 싼 Fe 성분에 관심이 모아지고 있지만 현재로서는 자체활성이 상대적으로 낮으므로 퍼센트단위의 많은 양을 사용해야하는 문제점을 안고 있다고 할 수 있다.

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.860-864
• /
• 2005

In this study, we fabricated honeycomb type Mixed-Gas Fuel Cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-shaped anode with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites and the others were filled with partial oxidation (POX) catalyst to increase fuel conversion. Furthermore we employed the sol-gel technique which can increase cell performance and decrease carbon coking.

• 항공우주시스템공학회지
• /
• 제14권4호
• /
• pp.32-39
• /
• 2020

A technological review and analysis were performed on thermal cracking of aviation hydrocarbon fuels that circulate as coolants in regenerative cooling systems of hypersonic flights. Liquid hydrocarbons decompose into low-carbon-number hydrocarbons when they absorb a considerable amount of energy at extremely high temperatures, and these thermal cracking behaviors are represented by heat sink capacity, conversion ratio, reaction products, and coking propensity. These parameters are closely interrelated, and thus, they must be considered for optimum performance in terms of the overall heat absorption in the regenerative cooling system and supersonic combustion in the scramjet engine.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.306-309
• /
• 2005

One of the most critical issues in sol id oxide fuel cell (SOFC)running on hydrocarbon fuels is the risk of carbon formation from the fuel gas. The simple method to reduce the risk of carbon formation from the reactions is to add steam to the fuel stream, leading to the carbon gasification react ion. However, the addition of steam to fuel is not appropriate for the auxiliary power unit (APU) and potable power generation (PPG) systems due to an increase of complexity and bulkiness. In this regard, many researchers have focused on so-called 'direct methane' operation of SOFC, which works with dry methane without coking. However, coking can be suppressed only by the operation with a high current density, which may be a drawback especially for the APU and PPG systems. The single chamber fuel cell (SC-SOFC) is a novel simplification of the conventional SOFC into which a premixed fuel/air mixture is introduced. It relies on the selectivity of the anode and cathode catalysts to generate a chemical potential gradient across the cell. Moreover it allows compact and seal-free stack design. In this study, we fabricated honeycomb type mixed-gas fuel cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-structured SOFC with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites. We will discuss that the anode supported honeycomb type cell running on mixed gas condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.115.2-115.2
• /
• 2010

Autothermal reforming(ATR) processes of hydrocarbon liquids such as diesel fuels are spotlighted as methods to produce hydrogen for Fuel cell. However, the use of heavy hydrocarbons as feedstocks for hydrogen production causes some problems which increase the catalyst deactivation by the carbon deposition. Coking can be inhibited by increasing the water dissociation on the catalyst surface. This results in catastrophic failure of whole system. Performance degradation of diesel autothermal reforming leads to increase of undesirable hydrocarbons at reformed gases and subsequently decrease the performance. In this study, perovskite-based catalysts were investigated as alternatives to substitute the noble metal catalyst for the ATR of diesel. The investigated perovskite structure was based on LaCrO3. and metals were added at the A-site to enhance oxygen ion mobility, transition metals were doped on the B-site to enhance the reformation. Substituted Lanthanum chromium perovskite were made by aqueous combustion synthesis, which can produce high surface area. And for the homogeneous fuel supply, we made ultrasonic injection system for reforming. We compared durability of evaporation system and ultrasonic system for fuel injection.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.69-76
• /
• 2008

Common methods for large scale hydrogen production, such as steam reforming and coal gasification, also involve production of carbonaceous gases. It is therefore necessary to handle process gas streams involving various mixtures of hydrocarbons, $H_2$, $H_2O$, CO and $CO_2$ at moderate to high temperatures. These gases pose a variety of corrosion threats to the alloys used in plant construction. Carbon is a particularly aggressive corrodent, leading to carburisation and, at high carbon activities, to metal dusting. The behaviour of commercial heat resisting alloys 602CA and 800, together with that of 304 stainless steel, was studied during thermal cycling in $CO/CO_2$ at $650-750^{\circ}C$, and also in $CO/H_2/H_2O$ at $680^{\circ}C$. Thermal cycling caused repeated scale separation, which accelerated chromium depletion from the alloy subsurface regions. The $CO/H_2/H_2O$ gas, with $a_C=2.9$ and $p(O_2)=5\times10^{-23}$ atm, caused relatively rapid metal dusting, accompanied by some internal carburisation. In contrast, the $CO/CO_2$ gas, with $a_C=7$ and $p(O_2)=10^{-23}-10^{-24}$ atm caused internal precipitation in all three alloys, but no dusting. Inward diffusion of oxygen led to in situ oxidation of internal carbides. The very different reaction morphologies produced by the two gas mixtures are discussed in terms of competing gas-alloy reaction steps.