• Journal of Magnetics
• /
• 제15권3호
• /
• pp.143-147
• /
• 2010

Rotary-type voice coil motors are widely used as actuators in hard disk drives. The recent trend toward higher density and smaller form factors in data storage devices requires performance improvement of the voice coil motor. In this study, we introduce a Halbach magnet array to the voice coil motor in order to increase the force generation. The Halbach magnetic circuit outperforms the conventional magnetic circuit due to the confined magnetic flux. To investigate the performance of the Halbach magnetic circuit, we analyze air gap flux density with the various shapes and thickness of the magnets using 3-dimensional finite element analysis. Consequently the optimum shape of the Halbach magnetic circuit is proposed. Simulations and experimental results proved effectiveness of the proposed magnet array in the voice coil motor for a commercial hard disk drive.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.281-285
• /
• 2017

Since the performance of the spring operating mechanism for a circuit breaker mainly depends on the dynamic behavior and mass of the coil spring, its dynamic analysis is required to evaluate the performance of the spring operating mechanism. In this study, a coil spring design program is developed for the spring operating mechanism. An experimental approach is used to find the variables satisfying the design constraints' requirements. The coil spring is formed by using a lumped mass spring model. This program offers reference data for the design of coil springs and for the spring operating mechanism.

• 한국주거학회논문집
• /
• 제14권5호
• /
• pp.75-82
• /
• 2003

In this study, the thermal performance of the room control system is analyzed in terms of control performance, potential for coil expansion and energy consumption through experiments comparing the individual room control system and an existing system. The results of this study show that the existing system is not able to supply design water flow rate and does not accurately maintain the set point temperature in each room. However, the individual room control system can set a room air temperature for each room, for it is able to supply design water flow and accurately control the set point temperature in each room and can reduce the energy consumption compared to the existing system. Moreover, the individual room control system can reduce the number of coil division zone and facilitates the construction process, because it can extend the length of the coil division.

• 한국항해학회지
• /
• 제9권1호
• /
• pp.95-109
• /
• 1985

It has been generally known that the chattering of an AC electromagnetic contactor due to the fluctuation of attracting force is the primary cause of its abrasion and noise. To reduce this chattering effect, an AC electromagnetic contactor is mostly fitted with a shading coil which works the role to make difference in phases of two distinct components of attracting force. The theoretical interpretation of an AC electromagnetic contactor with shading coil and the equation of its attracting force per unit wattage consumed have already been proposed, however, few explications so far have been made on the determination of optimal circuit constants of shading coil. In this paper, the auther constructs a circuit model of an AC electromagnetic contactor with shading coil which is based on the theoretical interpretation of shading coil examined to be valid by experiments under some assumptions, and defines the equation of attracting force without chattering per unit wattage consumed as a performance function for determining the optimal circuit constants of shading coil. And then, the optimal circuit constants maximizing the performance function are determined by means of computer simulation founded on the above circuit model and the characteristics of those circuit constants are examined with special attention to the coupling coefficient.

• 전자공학회논문지SC
• /
• 제47권2호
• /
• pp.1-7
• /
• 2010

본 논문은 Air-cored induction 코일 센서의 고주파 동작 특성에 대한 실험적 관계식을 제시한다. Air-cored induction 코일 센서는 입, 출력 간 선형성이 좋고 저주파 영역에서 정확한 출력 특성 예측이 가능해서 널리 사용되지만 민감도가 낮다는 단점이 있다. 반면, 고주파 영역에서는 코일 센서 구성상의 기생효과로 인해 민감도가 크게 향상되지만 인가되는 자기장 주파수에 대한 출력 민감도의 의존성으로 인해 사용이 제한되어 왔다. 그러나 최근 고정된 주파수의 자기장을 대상으로 하는 비파괴 자기 검사법에서 검사 성능을 향상시키기 위하여 이와 같은 코일 센서의 고주파 특성을 이용하기 시작하였는데 코일 센서를 고주파 영역에서 사용하기 위해서는 고주파 영역에서의 센서 특성에 대한 예측이 요구된다. 본 논문에서는 다양한 코일 센서의 구성 조건하에서 코일 센서의 주파수 응답 특성을 측정하고 이 측정 결과를 기반으로 하여, 민감도가 최대가 되는 공진 주파수와 최대 민감도를 코일 센서 단면의 지름, 권선 지름, 그리고 권선 수와 같은 구성 파라미터의 함수식으로 근사하였다. 함수식은 실험결과를 잘 반영하며, 추론된 함수식으로부터 원하는 사양을 가지는 코일 센서의 구성 방안 및 관련 회로 설계 사양을 얻을 수 있다.

• 설비공학논문집
• /
• 제26권2호
• /
• pp.67-71
• /
• 2014

In this study, a fan coil unit with an oval-type heat exchanger has been developed. The performance of the present fan coil unit has been investigated, by comparison with the previous fan coil unit with a circular-type heat exchanger. For the fan coil unit with circular- and oval-type heat exchangers, the heat flux and pressure loss through the heat exchangers were measured at standard operating conditions. In addition, the wind speeds exhausted from the fan coil units were compared, for the same fan motor operation. The experimental results show that the average wind speed of the oval-type heat exchanger is 20 percent higher than that of the circular-type heat exchanger. The heat flux in the oval-type heat exchanger is enhanced by 40% or more, over the circular-type heat exchanger.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.774_775
• /
• 2009

The shape optimization of a Thomson coil actuator used in an arc eliminator is done for fast response by adopting topology modification method. The performance of the actuator is analyzed by using an equivalent circuit method. Both shape optimization and performance analysis are accomplished based on the segmentation of plate. The effectiveness of the proposed method is proved by the comparison of results before and after the shape optimization.

• Journal of Magnetics
• /
• 제17권1호
• /
• pp.56-60
• /
• 2012

This paper presents an analysis and experiment of the flat coil actuator with shorted turn. The flat coil actuator is widely used in high precision products because it has no friction between the moving coil and the guide. A shorted turn and a center pole are placed into the flat coil actuator in order to reduce the inductance of the coil and improve the initial response when the actuator is voltage-driven. Enhanced dynamic performance of the flat coil actuator with shorted turn was demonstrated by simulation and experiment.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.891-896
• /
• 2004

'Coil' occupies very much important position in delivering driving force of optical pick-up actuators. Up to now the main stream has been a winding coil type actuator, but actuators using FP-Coil(fine pattern coil) have been considered for the more compacted and simple manufacturing process and have variously spreaded the application fields by product. We have tried to design actuators using PCB-Coil(printed circuit board coil) which has benefits in terms of price and manufacturing process. Especially this research has two main things to reduce the vibration of sub-resonance and to assure the DC sensitivity among the performances of asymmetric optical pick-up actuator with PCB-Coil.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.16-16
• /
• 2003

Purpose： Recently, a major interesting method of fast MR imaging is sensitivity encoding (SENSE) using arrays of multiple receiver coils. In this study, we have designed and implemented a 4-channel head array coil and optimized the structure and arrangement of the coil to improve the performance.