• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.509-516
• /
• 2005

For the purpose of comparing the bond strengths of compomers to composite resin, composite Z250, and two polyacid modified composite resin, Dyract AP and F2000, were selected and investigated using universal testing machine for measuring the shear bond strengths. Additionally, the failure modes were examined by observing the fractured surfaces of each specimen. The following results were obtained. 1. The shear bond strength of Dyract AP to Z250 were higher than those of F2000, but there was no statistically significant difference between group 1 and group 3(p>0.05), and groups using fresh compomers showed higher bond strength than those using aged compomers(p<0.05). 2. After measuring the shear bond strength of each group, it was highest in group 5 and was lowest in group 9(p<0.05). 3. Although there was no statistically significant difference, groups treated with thermocycling showed lower bond strengths than those of non-thermocycling groups. 4. Overall compomer/composite resin failures were adhesive. Cohesive failures occurred mainly in groups using bonding agent. Based on these results, the application of a bonding agent on fresh polyacid-modified resin composite increases the bond strength between polyacid-modified resin composite and composite resin. Additionally, the surface of aged polyacid-modified resin composite has to be roughened mechanically and a bonding agent has to be used in combination with composite resin.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.699-720
• /
• 1995

This study was conducted to evaluate the effect of benzalkonium chloride solution as a wetting agent instead of water on dentin bonding with NTG-GMA/BPDM system (All-bond 2, Bisco.) and DSDM system (Aelitebond, Bisco.). Benzalkonium chloride solution is a chemical disinfectant widely used in medical and dental clinics for preoperative preparation of skin and mucosa due to its strong effect of cationic surface active detergent. Eighty freshly extracted bovine lower incisor were grinded labially to expose flat dentin surface, and then were acid-etched with 10 % phosphoric acid for 15 second, water-rinsed, and dried for 10 second with air syringe. The specimens were randomly divided into 8 groups of 10 teeth. The specimens of control group were remoistured with water and the specimens of experimental groups were remoistured with 0.1 %, 0.5 %, and 1.0 % benzalkonium chloride solution respectively. And then, the Aelitefil composite resin was bonded to the pretreated surface of the specimens by use of All-bond 2 dentin bonding system or Aelitebond dentin bonding system in equal number of the specimens. The bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, the mode of failure was observed, the fractured dentin surface were examined under scanning electron microscopy, and FT-IR spectroscopy was taken for the purpose of investigating the changes of the dentin surface pretreated with benzal konium chloride solution followed by each primer of the dentin bonding systems. The results were as follows : In the group of bonding with NTG-GMA/BPDM dentin bonding agent(All-bond 2), higher tensile bond strength was only seen in the experimental group remoistured with 0.1 % benzal konium chloride solution than that in water-remoistured control group(p<0.05). In the group of bonding with DSDM dentin bonding agent (Aelitebond), no significant differences were seen between the control and each one of the experimental group(p<0.05). Higher tensile bond strength were seen in NTG-GMAIBPDM dentin bonding agent group than in DSDM dentin bonding agent group regardless of remoistur ization with benzal konium chloride solution. On the examination of failure mode, cohesive and mixed failure were predominantly seen in the group of bonding with NTG-GMAIBPDM dentin bonding agent, while adhesive failure was predominantly seen in the group of bonding with DSDM dentin bonding agent. On SEM examination of fractured surfaces, no differences of findings of primed dentin surface between the groups with and without remoisturization with benzal konium chloride solution. FT-IR spectroscopy taken from the control and the experimental group reve::.led that some higher absorbance derived from the primers binding to dentin surface was seen at the group pretreated with 0.1 % benzal konium chloride solution than at the control group of remoisturizing with water.

• Korean Journal of Plant Taxonomy
• /
• v.34 no.3
• /
• pp.221-244
• /
• 2004

Prunus sargentii complex of subgenus Cerasus is an Eastem Asiatic plant group that exhibits a broad range of morphological variation and includes P. takesimensis, P. yedosensis, P. verecunda, and P. sargentii. In this study, a morphological analysis was undertaken to determine whether the observed morphological variation was primarily attributable to morphological discontinuities among the taxa. P. sargentii, which distributed eastem area in Korea, northern area in Japan and far east Russia had umbel like inflorescence and additionally was characterized by sticky bud and leaf twigs, compared with P. serrulata complex. Also, P. verecunda in Korea and Japan was characterized by umbel like inflorescence and presence of hair in leaf, petiole and pedicel, and was treated as a variety of P. sargentii. Evidence obtained from multivariate morphometric analyses indicated that the entity of P. takesimensis formed a cohesive group somewhat distinct from P. sargenti.. Especially, P. takesimensis was characterized by relatively small flowers (26-32mm in diameter) and many flowers [(2)3-5] per umbel inflorescence, compared with P. sargentii (34-48mm and 2(3) per inflorescence) and should be recognized as an independent and endeImic taxon in Korea. Additionally, P. yedosensis, which was known to have umbel inflorescence (short peduncle type) with pubescent style based on the type specimen, was comprised of corymb inflorescence (long peduncle type) as well. The morphological differentiation between these two types of P. yedosensis was not considered sufficient to warrant recognition of specific status because of the putative hybrid origin, no distinctive geographical distribution pattern, and existence of various peduncle length on Island Jeju-do of Korea.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.243-266
• /
• 2004

This paper is based on fieldwork conducted from July 6, 2003 to July 24 of 2003 among the Tungusgroups Hezhe, Daur, Oloqun, Owenke, and Mongolian in the areas of Heilongjiang and Inner Mongolia Provinces. Recognizing the need for more in-depth study among these groups, the present research shows that the Tungus people are archeologically, historically, and linguistically different from Korean Han ethnic group and challenges the link between Korean and Tungus groups since the Bronze Age. The comparison between the "House Spirit" belief of the Tungus people and Koreans reveals certain commonalities in the "Maru," "Kitchen," and "Samshin Spirit" practices. There are two possible reasons for such commonalities. Historically, the Korean Han ethnic group and the Tungus people were geographically intimate, and contact or transmission between the two groups occurred naturally. Also, immigration of refugees from the fallen Koguryo and Puyo to the Tungus region added another dimension of cultural contact. In contrast to the common features shared between the two groups, there also exists differences between the two groups House Spirit blief. The Korean Han group's "House Spirit" belief is based on the agricultural practices that separates the inside sacred and outside secular world of the houses, whereas the Tungus ethnic group's "House Spirit" belief is based on mobile herding life style with a less distinction between in and outside of house. Additionally, each Korean "House Spirit" has its own distinctive personality, and each spirit is placed and worshipped according to its function. In the Tungus group, all the "House Spirits" are located and worshipped in "malu," and some of the spirits are non-conventional house spirits. Moreover, Korean "House Spirits" form a kinship structure, placing Songju, the highest spirit, at the center. In the Tungus practice, such structure is not found. The tight cohesive family formation among the house spirits in the Korean "House Spirit" belief is also the most distinctive feature in its comparison with Chinese belief. In China, the highest spirit is Jiang Taigong or Qiwu, and the house spirits do not have kinship relations. Korean's Outhouse Spirit and Chowangshin are related to the Han Chinese's counterpart on certain levels? however, their basic structures are different. It is clear that the correlation of "Malu" "Chowangshin" and "Samshin" between Korea and Tungus indicate important role of Tungus cultural elements within Korea's "House Spirit" belief.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.95-101
• /
• 2019

Purpose: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (${\mu}TBS$) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. Materials and methods: Four adhesive primers (Universal primer, Metal primer II, Alloy primer, and Metal/Zirconia primer) and two resin cements (Panavia F2.0, G-CEM LinkAce) were tested. One hundred fifty Co-Cr beams were prepared from Co-Cr ingots via casting ($6mm\;ength{\times}1mm\;width{\times}1mm\;thick$). The metal beams were randomly divided into ten groups according to the adhesive primers and resin cements used; the no-primer groups served as the control (n = 15). After sandblasting with aluminum oxide ($125{\mu}m$ grain), the metal and resin cements were bonded together using a silicone mold. Prior to testing, all metal-resin beams were examined under stereomicroscope, and subjected to the ${\mu}TBS$ test. The mean value of each group was analyzed via one-way ANOVA with Tukey's test as post hoc (${\alpha}=.05$) using SPSS software. Results: The mean ${\mu}TBS$ of all groups was ranged from 20 to 28 MPa. There is no statistically significant difference between groups (P > .05). Mixed failure, which is the combination of adhesive and cohesive failures, is the most prevalent failure mode in both the Panavia F2.0 and G-Cem LinkAce groups. Conclusion: The ${\mu}TBS$ of all tested groups are relatively high; however, the primers used in this study result in no favorable effect in the ${\mu}TBS$ of Panavia F2.0 and G-Cem LinkAce resin cement to Co-Cr alloy.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.6
• /
• pp.17-26
• /
• 2021

Ground investigation and result analysis generally used to examine all sorts of structures' subsidence or stability can be classified into sandy soil and cohesive soil, and analysis on the liquid limit of soil is utilized to evaluate the physical properties of ground and types or technical behavior of soil. The most widely used method to analyze liquid limit is Casagrande with which liquid limit can be calculated relatively easily; however, it is fairly difficult to apply it to soil equipped with intermediate properties. Therefore, concerning the properties of soil having the intermediate properties of sedimentary ground, this researcher mixed the clay from Yangsan, Gwangyang, and Busan with sandy soil to make intermediate soil and then carried out the test of consistency limit and also evaluated applicability by using the suggested formula of consistency revision. The sample of intermediate soil was the mixture of clay and sandy soil, and to produce intermediate soil, the content (F_c) of fine soil was applied as 50%, 75%, or 100%. Regarding the physical properties of intermediate soil, to maintain the properties of clay in the natural state, bentonite was added at a fixed rate for controlling the properties of clay, and then, consistency was analyzed. By adopting the formula of consistency revision suggested in advanced research, this author analyzed consistency based on the experiment and consistency based on the suggested formula of revision. Also, about intermediate soil collected at the site, consistency based on the experiment and consistency based on the suggested formula of revision were analyzed comparatively, and about intermediate soil collected, this researcher analyzed particle size and calculated the content (F_c) of fine soil to analyze intermediate soil in diverse conditions. Moreover, about intermediate soil collected at the site, the suggested formula of consistency revision was applied to calculate the compression index, and the compression index based on the experiment and the compression index based on the suggested formula were analyzed comparatively to evaluate the applicability of the suggested formula.