• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.360-369
• /
• 2001

This paper proposes the groupwise serial cross interference cancellation(GSCIC) algorithm for coherent detection and analyzes the groupwise serial block interference cancellation(GSBIC) and GSCIC algorithm for an asynchronous wideband DS-CDMA system in a single cell over multipath fading channels. In general, the GSIC algorithm can be grouped into two classes: i.e., GSBIC and GSCIC algorithm. In this paper, the proposed GSCIC algorithm is to improve the performance of the GSBIC algorithm. We compare the performance of the GSCIC and existing GSBIC algorithm in a multipath fading channel to that of the existing SIC algorithm. As a result, the performance of GSCIC algorithm is somewhat better compared with the GSBIC algorithm according to reduction factor $R_{f}$ and is similar to that of the SIC algorithm. And also, the GSBIC and GSCIC algorithms have the advantage that it can be analyzed system performance easily, changing the number of users within a user group according to system capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.179-187
• /
• 2002

This paper proposes and analyzes the iterative groupwise equal-delay interference cancellation(IGEIC) algorithm for coherent detection of an asynchronous wideband DS-CDMA system in a single cell over multipath fading channels. The IGEIC algorithm divide users in a system into several groups, and subtract out interference signal from the received signal as many as the number of users within a user group, iteratively. The IGEIC algorithm is also classified into the iterative groupwise equal-delay serial interference cancellation(IGESIC) algorithm and the iterative groupwise equal-delay parallel interference cancellation(IGEPIC) algorithm. In the case of perfect correlation for spreading codes, it shows that the performance of IGESIC and IGEPIC algorithm is the same after interference cancellation of as many as the number of users within a user group, but the performance of IGEPIC algorithm is superior to the IGESIC algorithm just before fecal cancellation within a user group. The results show that (he performance of the two proposed algorithms are also superior to the SIC algorithm by 3dB.

• Laser Solutions
• /
• v.6 no.3
• /
• pp.19-28
• /
• 2003

The manufacturing process for the microfluidic device can include sequential steps such as master fabrication, electroforming, and injection molding. The laser ablation, using masks, has been applied to the fabrication of channels in microfluidic devices. In this research, an excimer laser was used to engrave microscopic channels on the surface of PET (polyethylene terephthalate), which shows a high absorption ratio for an excimer laser beam with a wavelength of 248 m. When 50-${\mu}{\textrm}{m}$-wide rectangular microscopic channels are ablated with a 500 ${\times}$ 500 ${\mu}{\textrm}{m}$ square mask at a magnification ratio of 1/10, ditch-shaped defects were found in both corners. The measurement of laser beam intensity showed that a coherent image in the PET target caused such defects. Analysis based on the Fourier diffraction theory enabled the prediction of the coherent shape at the image surface as well as the diffraction beam shape between the mask and the image surface. It also showed that the diameter of the aperture had a dominant effect. The application of aperture with a diameter of less than 3 mm helped to eliminate such defects in the ablated rectangular microscopic channels on PET without such ditch-shaped defects.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2900-2922
• /
• 2021

In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.

• Journal of muscle and joint health
• /
• v.13 no.1
• /
• pp.53-66
• /
• 2006

Aims. In order to analyze the concept of stigma, so to develop a valid instrument to measure stigma. Methods. First, a concept analysis was conducted with the aim of clarifying the state of the science of discipline-specific conceptualizations of stigma. The criterion-based method of concept analysis as described by Morse and colleagues was used (Morse et al., 1996; Morse, 2000). This analytic process enabled the assessment of the scientific maturity of the concept of stigma. The interdisciplinary concept of stigma was found to be immature. Based on this level of maturity it was determined that in order to advance the concept of stigma toward gloater maturity. techniques of concept development using the literature as data were applied. In this process, questions were 'asked of the data' (in this case, the selected disciplinary literatures) to identify the conceptual components of stigma. Results. The inquiry into the concept of stigma led to the development of an expanded interdisciplinary conceptual definition by merging the most coherent commonalties from each discipline. And the conceptual components of stigma were identified. The antecedent factors of stigma were "apart from social identity". The attributes of stigma were "devaluing, labeling, negative stereotypes, discrimination". The consequences of stigma were "social rejection, social isolation, deficiency of social support, low social status".

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1056-1063
• /
• 2007

Recently, there has been a growing consumer interest in the amount of noise produced by household electrical appliances. The designer of the product must identify the source of the noise, in order to reduce the noise. In the case of a household electric appliance such as the washing machine, there is consumer's complaint about the noise that is generated during the dehydrating condition. Because of several noise sources combined each other. It is difficult to identify the noise sources that contribute to the noise output. Multi-Dimensional Spectral Analysis (MDSA) is a method that can remove the correlation between different noise sources, and it expresses the key contributing factor as a unique output. This study utilized MDSA to analyze the contribution of each input in the noise output during the dehydrating condition.

• Wind and Structures
• /
• v.37 no.3
• /
• pp.191-209
• /
• 2023

This work investigates the subcritical free-shear prism wake at Re=22,000 by the Koopman analysis using the Dynamic Mode Decomposition (DMD) algorithm. The Koopman model linearized nonlinearities in the stochastic, homogeneous anisotropic turbulent wake, generating temporally orthogonal eigen tuples that carry meaningful, coherent structures. Phenomenological analysis of dominant modes revealed their physical interpretations: Mode 1 renders the mean-field dynamics, Modes 2 describes the roll-up of the Strouhal vortex, Mode 3 describes the Bloor-Gerrard vortex resulting from the Kelvin-Helmholtz instability inside shear layers, its superposition onto the Strouhal vortex, and the concurrent flow entrainment, Modes 6 and 10 describe the low-frequency shedding of turbulent separation bubbles (TSBs) and turbulence production, respectively, which contribute to the beating phenomenon in the lift time history and the flapping motion of shear layers, Modes 4, 5, 7, 8, and 9 are the relatively trivial harmonic excitations. This work demonstrates the Koopman analysis' ability to provide insights into free-shear flows. Its success in subcritical turbulence also serves as an excellent reference for applications in other nonlinear, stochastic systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.231-241
• /
• 2004

This paper drives the exact expression of bit error rate(BER) performance for groupwise iterative-multipath interference cancellation(GWI-MPIC) algorithm for cancelling multipath interference components in a coherent high-speed downlink packet access(HSDPA) system of W-CDMA downlink and the BER performance is evaluated by numerical analysis. The performance of GWI-MPIC is compared to the successive interference cancellation(SIC) algorithm for multipath components. From numerical results, the optimal average BER performance of weighting factor ${\beta}$$\_$h/ for interference cancellation is obtained at ‘${\beta}$$\_$h/=0.8’ and then this weighting factor is hereafter applied to other performance analysis. Numerical results showed that the average BER performance of GWI-MPIC algorithm is rapidly degraded at multipath L=6, but is revealed the good performance than that of SIC algorithm in terms of increasing the number of multipath. This results also indicated that the average BER performance is greatly degraded due to increasing interference power more than multicode K=8. The average BER performance of the proposed algorithm is superior to the performance of SIC algorithm about 3 ㏈ for processing gain PG=128 at multipath L=2 and Average BER=1.0${\times}$10$\^$-5/. And also, the results produced good performance in case of linear monotonic reduction of multipath fading channel gain than that of constant channel gain variation, because multipath fading channel gain which is arrived later is small.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.365-366
• /
• 2002

The sliding wear behavior of ultra high molecular weight polyethylene (UHMWPE) was examined on a novel low temperature degradation-free zirconia/alumina composite material and conventional alumina and zirconia ceramics used for femoral head in total hip joint replacement. The wear of UHMWPE pins against these ceramic disks was evaluated by performing linear reciprocal sliding and repeat pass rotational sliding tests for one million cycles in bovine serum. The weight loss of polyethylene against the novel low temperature degradation-free zirconia/alumina composite disks was much less than those against conventional ceramics for all tests. The mean weight loss of the polyethylene pins was more io the linear reciprocal sliding test than in the repeal pass rotational sliding lest for all kinds of disk materials. Neither the coherent transfer film nor the surface damage was observed on the surface of the novel zirconia/alumina composite disks during the test. The observed r,'stilts indicated that the wear of the polyethylene was closely related to contacting materials and kinematic motions. In conclusion, the novel zirconia/alumina composite leads the least wear of polyethylene among the tested ceramics and demonstrates the potential as lhe alternative materials for femoral head in total hip joint replacement.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.109-122
• /
• 1998

In the design and construction of Keystone block reinforced wall with geogrid, previous on the behaviour of wall in curved area is required. This study is to investigate the structural stability of wall and problems during construction in curved area. Previous analyzing methods, usually used for straight area of wall, have been reviewed to find any problems in applying to stability analysis of curved area. Thus, the purpose of this study is to show how to analyse the straight area of Keystone block wall first, and then turn this to use for analyzing various significance, concerning the design or construction of curved high keystone block wall. and the stress behavior on retaining wall between straight and curved conditions by F.E.M, using the shell analysis theory.