• Education of Primary School Mathematics
• /
• v.25 no.4
• /
• pp.279-295
• /
• 2022

This study was conducted to present implications for mathematics education by identifying the structural relationship among personality, negative emotion, motivation, and career maturity that affects elementary school student's mathematical academic achievement. The participants conveniently sampled 179 students, from 4th to 6th graders enrolled in the same elementary school, and data on their psychological variables were collected in the form of secondary data. The hypothetical structural equation model established based on prior studies was verified with a two-stage approach based on the collected data. It was confirmed that construct validity and construct reliability were secured through assessing the measurement model. In addition, as a result of analyzing the path coefficient of the final structural equation model, five paths were found to be significant: 'personality→motivation', 'personality→career maturity', 'negative emotion→motivation', and 'negative motivation→mathematical academic achievement'. In particular, the path of 'negative emotion→negative motivation→mathematics academic achievement' that can be confirmed through the results needs to moderate negative emotions to improve mathematical academic achievement, and at this time, negative motivation should be considered together.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.357-363
• /
• 2009

When yields the mean velocity of the closed conduit which is used generally, it is available to use Darcy Weisbach Friction Loss Head equation. But, it is inconvenient very because Friction Loss coefficient f is the function of Reynolds Number and Relative roughness (${\varepsilon}$/d). So, it is demanded more convenient equation to estimate. In order to prove the reliability and an accuracy of Chiu's velocity equation from the research which sees hereupon, proved agreement very well about measured velocity measurement data by using Laser velocimeter which is a non-insertion velocity measuring equipment from the closed conduit (Laser Doppler Velocimeter: LDV) and an insertion velocity measuring equipment and the Pitot tube which is a supersonic flow meter (Transit-Time Flowmeters). By proving theoretical linear-relation between maximum velocity and mean velocity in laboratory flume without increase and decrease of discharge, the equilibrium state of velocity in the closed conduit which reachs to equilibrium state corresponding to entropy parameter M value has a trend maintaining consistently this state. If entropy M value which is representing one section is determinated, mean velocity can be gotten only by measuring the velocity in the point appearing the maximum velocity. So, it has been proved to estimate simply discharge and it indicates that this method can be a theoretical way, which is the most important in the future, when designing, managing and operating the closed conduit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.6
• /
• pp.518-524
• /
• 1990

Actual evapotranspiration was measured over rice paddy field by Bowen ratio heat balance method and based on this, investigated was the reliability of actual evapotranpiration estimation from Class-A Pan and small pan evaporation and reference evapotranspiration calculated by modified Penman-Monteith model. Crop coefficients based on Class-A Pan and small pan evaporation and reference evapotranspiration by modified Penman-Monteith model were averaged to be 1.57. 1.10 and 1.49 over the whole rice growing season, respectively. Their respective coefficients of variation were 28.7. 22.7 and 12.8 percent, respectively. Crop coefficient based on modified Penman-Monteith model varied in good agreement with the trend of leaf area development, being greatest around heading stage.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.31-42
• /
• 2009

Purpose: As the number of domestic medical institutions installing PET/CT is increasing rapidly, the transfer of PET/CT images among medical institutions is also increasing. Thus, it is necessary to collect the comparative SUV data from several medical institutions' PET/CT systems through a phantom study which semi-quantitatively compares the SUV on one bed, the change scale of the SUV on the slices, and the time of measuring. The phantom study to find differences among the SUVs from various PET/CT offers the opportunity to obtain the reliability of the SUV in PET/CT images. Materials and Methods: Ten PET/CT systems from medical institutions in Korea were used. To obtain the accurate data, the study has been using the radiation detector of Korea Research Institute of Standards and Science to verify. The internal structures of NEMA $phantom^{TM}$ were removed and Six thousand milliliters of distilled water which has 1mCi of $^{18}F$-FDG put into the phantom. The water was properly integrated with $^{18}F$-FDG using magnetic stirrer. The images were acquired at 60, 70, 80, 90, 100, 110 and 120-minutes for 3 minute each. Two hundred square centimeters of region of interests were placed and analyzed. To confirm the usefulness, the correction-table came out from patients' data. Results: The coefficient of variability of the SUV from -11.0 to 9.90 % fell into the range of international standards(${\pm}10%$) along with the SUV on a bed, the change scale of the SUV on the slices, and the time of measuring, except one PET/CT system. Using the data of the differences among the SUVs, we came to withdraw the correction-table ranging from 0.803 to 1.246. The correction-table was confirmed its usefulness through Linear Regression Analysis which was applied to normal cases. Conclusions: Although studies have been made on the variation of the SUV, there is little attention on the standardization of the SUV. Based on this study of the quantitatively comparable data about the SUV accommodating the correction-table, it would help to have more corrective diagnosis.

• The Korean Journal of Rehabilitation Nursing
• /
• v.6 no.1
• /
• pp.26-39
• /
• 2003

The elderly can experience a lot of stressful events and the stress acts as a various fluent that affects a well-being level, the self-contentment of lives, and the achievements by themselves. Also, the elderly are different from the young in many unexpressed stress and have diverse copings for perceived stress. Moreover, they mainly seem to use a problem-focused coping and an emotion-focused coping. To use whatever copings is to improve the quality of life in the old period and very important fact to achieve their ends. The purpose of this study was to investigate the relationship between Perceived Stress and the Ways of Coping in the Elderly and to gain the baseline data for development of nursing intervention program for improve to the quality of life in the elderly. The design of this study was a correlational study. The subjects of this study consisted of 230 of the elderly living in Pusan. The data was collected from 1st July. to 1st September, 2002. The instruments used for this study were 'Perceived Stress Scale(20items, 5point. scale)' developed by Kang In(1990) and translated by Lee young-ja(1999), and its reliability is Cronbach's ${\alpha}=.89$. 'Coping Scale(30items, 4point. scale, 14 items about a problem-focused coping, 16 items about an emotion-focused coping, 4 points scale) developed by Lazarus & Folkman(1984) and translated by Yang Young-hee(1998). The reliability of this study is Cronbach's ${\alpha}=.90$. The data was analyzed by the SPSS WIN 10.0 program using frequency, percentage, mean, standard deviation, t-test, ANOVA & Scheffe test and Pearson's correlation coefficient. The results of this study were as follows; 1. The mean score of perceived stress was $31.75{\pm}10.23$(Min 20, Max 100), which the item mean score was $1.59{\pm}.51$(Min 1, Max 5). 2. The number of subjects in a problem-focused coping was 72(31.3%), the number of subjects in an emotion-focused coping was 158(68.7%) 3. There were statistically significant positive correlation between perceived stress and problem-focused coping method and the more emotion-focoused coping method.(r=.180, r= .209, P< .05). It means the more stress, the more problem-focused coping method and the more emotion-focused coping method. 4. There was significant difference the score of perceived stress according to sex (F=-5.057, P=.000)marital status, (F=-2.909, P=.004), economic level, (F=10.243, P=.000), paticipated meeting, (F=9.346, P=.000), perceived health status(F=5.117, P=.007). 5. There was significant difference the score of problem-focused coping method according to age(F=14.200, P=.000), marital status (F=2.432, P=.0160), economic level (F=14.410, P=.000), monthly income, (F=8.300. P=.000), income resource (F=10.235, P=.000), educational level (F=15.222, P=.000), occupation (F=1.544, P=.041), paticipated meeting (F=4.936, P=.008), perceived health status(F=5.655, P=.004). And there was significant difference the score of emotion-focused coping method according to monthly income(F=4.781, P=.009), income resource(F=2.930, P=.035), educational level(F=6.101, P=.003), religionF=2.698, P=.032), paticipated meetings(F=7.285, P=.001). As a result of the study, the elderly had a bit less stress and the two-thirds of the elderly used the emotion-focused coping. Thus, the more perceived stress, the more problem-focused coping method and the more emotion-focused coping method. Accordingly, to improve the quality of life of the elderly, there needs and applies a nursing intervention program that relieves the stress and use effective coping method.

• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.1
• /
• pp.83-93
• /
• 2016

Objectives : The Center for Epidemiologic Studies Depression scale-Revised is a recently revised scale which has been reported as a valid tool for the assessment of depressive symptoms. It encompasses cardinal symptoms of depression described in the Diagnostic and Statistical Manual of Mental disorders, fourth edition. In this study, we assessed the reliability, validity and psychometric properties of the Korean version of the CESD-R(K-CESD-R). Methods : Forty-eight patients diagnosed as major depressive disorder, dysthymia, depressive disorder NOS according to the DSM-IV criteria using Mini International Neuropsychiatric Interview and 48 healthy controls were enrolled in this study. They were assessed with K-CESD-R, K-MADRS, PHQ-9, KQIDS-SR, STAI to check cross-validation. Statistical analyses were performed using calculation of Cronbach's alpha, Pearson correlation coefficient, Principal Component Analysis, ROC curve and optimal cut-off value. Results : The Cronbach's alpha of K-CESD-R was 0.98. The total score of K-CESD-R revealed significantly high correlations with those of K-MADRS, PHQ-9, KQIDS-SR(r=0.910, 0.966 and 0.920, p<0.001, respectively). Factor analysis showed two factors account for 76.29% of total variance. We suggested the optimal cut-off value of K-CESD-R as 13 according to analysis of the ROC curve which value sensitivity and specificity both equally. Conclusions : These Results showed that the K-CESD-R could be a reliable and valid scale to assess depressive symptoms. The K-CESD-R is expected as a useful and effective tool for screening and measuring depressive symptoms not only in outpatient clinic but also epidemiologic studies.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.607-614
• /
• 2023

Clear overlapping of the bilateral epicondyle and proper separation of the elbow joint are crucial for obtaining accurate lateral general radiographs of the elbow. However, due to the complex anatomical structure of the elbow, achieving optimal positioning is challenging, leading to the need for repeated x-ray examinations. Therefore, the purpose of this study was to investigate the angle of the forearm in patients where accurate lateral images of the elbow joint can't be obtained after vertical incidence using a styrofoam device during elbow joint lateral x-ray imaging. Twenty patients were enrolled in our study following the established protocol. First, a vertical x-ray at an angle of 0° between the forearm and the table was taken (control group). Here, if the lateral image of the elbow joint was deemed inadequate, the forearm angle was adjusted using custom-made styrofoam supports with 5° and 10° inclinations (experimental groups). For the evaluation method, two assessors utilized a 5-point Likert scale to assess the images. The reliability of the assessments was analyzed using Cronbach's alpha coefficient. As a result, patients with inadequate overlap of the bilateral epicondyle and separation of the elbow joint in the initial examination (control group) were able to obtain the best images when setting a 10° angle between the forearm and the table. The subjective evaluation was 1.6 ± 0.8 points at 0°, 2.7 ± 0.8 points at 5°, and 4.4 ± 1.3 points at 10°, respectively. The reliability analysis for the angles of 0°, 5°, and 10° yielded Cronbach's alpha values of 0.867, 0.697, and 0.922, respectively. In conclusion, when it is not possible to obtain accurate images using the conventional position and X-ray beam direction, it is considered that by initially acquiring images with an angle of 10° between the forearm and the table, and gradually decreasing the angle while obtaining images, it would be possible to achieve the optimal image while reducing the number of repeat examinations.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.1
• /
• pp.27-32
• /
• 2022

Purpose When performing a whole-body bone scan, many patients are experiencing psychological difficulties due to the close distance to the detector. Recently, in the medical field, there is a report that using virtual reality (VR) equipment can give pain relief to pediatric patients with weak concentration or patients receiving severe treatment through a distraction method. Therefore, in this paper, VR equipment was used to provide psychological stability to patients during nuclear medicine tests, and it is intended to evaluate whether it can be used in clinical practice. Materials and Methods As VR equipment, ALLIP Z6 VR (ALLIP, Korea) was used and the experiment was conducted after connecting to a mobile phone. The subjects were 30 patients who underwent whole-body bone examination from September 1, 2021 to September 30, 2021. After intravenous injection of 99mTc-HDP, 3 to 6 hours later, VR equipment was put on and whole body images were obtained. After the test, a survey was conducted, and a Likert scale of 5 points was used for psychological anxiety and satisfaction with VR equipment. Hypothesis verification and reliability of the survey were analyzed using SPSS Statistics 25 (IBM, Corp., Armonk, NY, USA). Results Anxiety about the existing whole-body bone test was 3.03±1.53, whereas that of anxiety after wearing VR equipment was 2.0±1.21, indicating that anxiety decreased to 34%. When regression analysis of the effect of the patient's concentration on VR equipment on anxiety about the test, the B value was 0.750 (P<0.01) and the t value was 6.181 (P<0.01). decreased and showed an influence of 75%. In addition, overall satisfaction with VR equipment was 3.76±1.28, and the intention to reuse was 66%. The Cronbach α value of the reliability coefficient of the questionnaire was 0.901. Conclusion When using VR equipment, patients' attention was dispersed, anxiety was reduced, and psychological stability was found. In the future, as VR equipment technology develops, it is thought that if the equipment can be miniaturized and the resolution of VR content images is increased, it can be used in various clinical settings if it provides more realistic stability to the patient.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.239-247
• /
• 2023

The FIDIC Red Book is an international standard contract condition in which the Employer designs and the Contractor performs the construction. The Engineer of FIDIC Red Book shall agree or determine any matter or Claim in accordance with Sub-Clause 3.7 neutrally, not as an agent of the Employer. This study aimed to derive Key Risk Sub-Clauses out of 49 Sub-Clauses that the Engineer of FIDIC Red Book recently revised in 18 years shall agree or determine according to Sub-Clause 3.7 using the Delphi method. A panel of 35 experts with more than 10 years of experience and expertise in international construction contracts was formed, and through total three Delphi surveys, errors and biases were prevented in the judgment process to improve reliability. As for the research method, 49 Sub-Clauses that engineers shall agree on or determine according to Sub-Clause 3.7 of the FIDIC Red Book were investigated through the analysis of contract conditions. In order to evaluate the probability and impact of contractual risk for each 49 Sub-Clause, the Delphi survey conducted repeatedly a closed-type survey three times on a Likert 10-point scale. The results of the first Delphi survey were delivered during the second survey, and the results of the second survey were delivered to the third survey, which was re-evaluated in the direction of increasing the consensus of experts' opinions. The reliability of the Delphi 3rd survey results was verified with the COV value of the coefficient of variation. The PI Risk Matrix was applied to the average value of risk probability and impact of each of the 49 Sub-Clauses and finally, 9 Key Risk Sub-Clauses that fell within the extreme risk range were derived.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.3
• /
• pp.269-277
• /
• 2010

Previous studies have shown that the most important factor affecting customer loyalty in the service industry is service quality. However, on the subject of whether service quality has a direct or indirect effect on customer loyalty, scholars' views apparently vary. Some studies suggest that service quality has a direct and fundamental influence on customer loyalty (Bai and Liu, 2002). However, others have shown that service quality not only directly affects customer loyalty, it also has an indirect impact on customer loyalty by influencing customer satisfaction and perceived value (Cronin, Brady, and Hult, 2000). Currently, there are few domestic articles that specifically address the relationship between service quality and customer loyalty in the mobile communication industry. Moreover, research has studied customer loyalty as a whole variable, rather than breaking it down further into multiple dimensions. Based on this analysis, this paper summarizes previous study results, establishes an effect mechanism model among service quality, customer satisfaction, and customer loyalty in the mobile communication industry, and presents a statistical test on model assumptions by using customer investigation data from Heilongjiang Mobile Company. It provides theoretical guidance for mobile service management based on the discussion of the hypothesis test results. For data collection, the sample comprised mobile users in Harbin city, and the survey was taken by random sampling. Out of a total of 300 questionnaires, 276 (92.9%) were recovered. After excluding invalid questionnaires, 249 remained, for an effective rate of 82.6 percent for the study. Cronbach's ${\alpha}$ coefficient was adapted to assess the scale reliability, and validity testing was conducted on the questionnaire from three aspects: content validity, construct validity. and convergent validity. The study tested for goodness of fit mainly from the absolute and relative fit indexes. From the hypothesis testing results, overall, four assumptions have not been supported. The ultimate affective relationship of service quality, customer satisfaction, and customer loyalty is demonstrated in Figure 2. On the whole, the service quality of the communication industry not only has a direct positive significant effect on customer loyalty, it also has an indirect positive significant effect on customer loyalty through service quality; the affective mechanism and extent of customer loyalty are different, and are influenced by each dimension of service quality. This study used the questionnaires of existing literature from home and abroad and tested them in empirical research, with all questions adapted to seven-point Likert scales. With the SERVQUAL scale of Parasuraman, Zeithaml, and Berry (1988), or PZB, as a reference point, service quality was divided into five dimensions-tangibility, reliability, responsiveness, assurance, and empathy-and the questions were simplified down to nineteen. The measurement of customer satisfaction was based mainly on Fornell (1992) and Wang and Han (2003), ending up with four questions. Based on the study’s three indicators of price tolerance, first choice, and complaint reaction were used to measure attitudinal loyalty, while repurchase intention, recommendation, and reputation measured behavioral loyalty. The collection and collation of literature data produced a model of the relationship among service quality, customer satisfaction, and customer loyalty in mobile communications, and China Mobile in the city of Harbin in Heilongjiang province was used for conducting an empirical test of the model and obtaining some useful conclusions. First, service quality in mobile communication is formed by the five factors mentioned earlier: tangibility, reliability, responsiveness, assurance, and empathy. On the basis of PZB SERVQUAL, the study designed a measurement scale of service quality for the mobile communications industry, and obtained these five factors through exploratory factor analysis. The factors fit basically with the five elements, indicating the concept of five elements of service quality for the mobile communications industry. Second, service quality in mobile communications has both direct and indirect positive effects on attitudinal loyalty, with the indirect effect being produced through the intermediary variable, customer satisfaction. There are also both direct and indirect positive effects on behavioral loyalty, with the indirect effect produced through two intermediary variables: customer satisfaction and attitudinal loyalty. This shows that better service quality and higher customer satisfaction will activate the attitudinal to service providers more active and show loyalty to service providers much easier. In addition, the effect mechanism of all dimensions of service quality on all dimensions of customer loyalty is different. Third, customer satisfaction plays a significant intermediary role among service quality and attitudinal and behavioral loyalty, indicating that improving service quality can boost customer satisfaction and make it easier for satisfied customers to become loyal customers. Moreover, attitudinal loyalty plays a significant intermediary role between service quality and behavioral loyalty, indicating that only attitudinally and behaviorally loyal customers are truly loyal customers. The research conclusions have some indications for Chinese telecom operators and others to upgrade their service quality. Two limitations to the study are also mentioned. First, all data were collected in the Heilongjiang area, so there might be a common method bias that skews the results. Second, the discussion addresses the relationship between service quality and customer loyalty, setting customer satisfaction as mediator, but does not consider other factors, like customer value and consumer features, This research will be continued in the future.