• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.3
• /
• pp.532-543
• /
• 1999

This study was conducted to provide the basic data necessary for the improvement of the teaching method for basic nursing practice as well as the effectiveness of the practice by examining the students' competency in cleansing enema after doing the self study instead of the traditional education. To examine the competency in cleansing enema after the self study, this study is an one group pretest-posttest design that subjects did the enema practice through the self study. The subjects were 89 sophomore students at Y University. College of Nursing. In basic nursing lab practice class, cleansing enema self study module was given to the students which was developed by the researcher based on the literature review and asked them to finish doing the pre study and checking the self study evaluation criteria after reading the goal, learning activities and theoretical guideline. After watching the video tape, students practiced the process in the module by themselves. For the competency in cleansing enema. repeated autonomous practices were done during the open lab other than the regular class. Whenever the practice was done, the frequency and time were measure and documented. When the student felt confident through repeated practices, the competency was evaluated by the researcher and two assistants based on the evaluation criteria. And the process was repeated till the student could perform all the items on evaluation criteria completely. The data were collected for 42 days from Oct. 15 to Nov. 26 in 1996. Collected data were analyzed by frequency, percentage, Pearson correlation coefficient and variance analysis. The results are summarized as follows : 1. 43.2% of the students were favorable to nursing and 63.6% like lecture, but 71.6% like practice. So they were more interested in practice than in lecture. 2. 62.3% of the students scored high in written test, 97.8% scored high in practice. So the practice score was better. 3. The frequency of repeated practice to pass the test ranged from 1 to 4 and the average is 2.2. 4. The average time needed in preparation and the performance was nearly the same regardless of the frequency. It took 5 to 38 minutes for those who passed the test after practicing once and the average was 16 minutes. 5 to 60 minutes were taken for those who practiced twice to pass the test and the average was 21 minutes. Those who passed the test after three practices needed 8 to 30 minutes and the average was 15 minutes, which was similar to the time that the students who passed the test for the first trial. Only one student passed the test after 4 practices and it took 10 minutes. 5. 64% of the students agreed that the context and the content of the module were appropriate for the self study and 68.2% were satisfied. And 71.9% said that the module helped them to practice the enema self study 6. Though only 42% of the students were satisfied with the video. 50.6% said that it was helpful for the self study. 7. 52.3% of the students were satisfied with the self study method, and 86.6% obtained self-confidence when performing the enema. 8. The lower the student's practice score was, the more practices were needed for them to pass the test(r=-.213, P<.05). As a result, for performing the enema practice competently, two or more practice opportunities were needed to be given. And it is possible to obtain the less complex nursing skills through the self study, when enough learning resources and assistance such as learning guidance or video tapes are provided. Based on this study. I want to suggest that. 1. There must be college policy that can support the new method instead of the traditional learning method for the students to attain the proficiency in basic nursing skills. 2. The assistant materials should be developed as soon as possible to promote the self study of basic nursing skills.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.565-582
• /
• 2018

We investigated the hydrochemical properties of ChusanYongchulso Spring located in Buk-myeon, Ulleung Island, focusing on the formation and characteristics of aquifers in and around the Nari caldera. Abundant pumice with high permeability and numerous fractures (including faults and joints) that formed as a result of caldera subsidence are widely distributed in the subsurface, favoring the formation of aquifers. Because of the presence of porous pyroclastic rocks with a high internal surface area, the water type of the springs is characterized by $NaHCO_3$, with upper stream waters and the upper spring being characterized by $NaHCO_3$ and NaCl, respectively. Components with a high coefficient of determination with EC are $HCO_3$, Na, F, Ca, Mg, Cl, $SiO_2$, and $SO_4$. The high concentrations of Na and Cl might be attributable to the main lithologies in the area, given that alkaline volcanic rocks are distributed extensively across Ulleung Island. Eh and pH, which are considered to be important indicators of water-rock interaction, are unrelated to most components. According to the results obtained from factor analysis, the variance explained by factor 1 is 54% and by factor 2 is 25.8%. Components with a high loading on factor 1 are F, Na, EC, Cl, $HCO_3$, $SO_4$, $SiO_2$, Ca, $NO_3$, and Mg, whereas components with a high loading on factor 2 are Mg and Ca, along with K, $NO_3$, and DO with negative loadings. It is suggested that the high concentrations of Na, Cl, F, and $SO_4$ are closely related to the presence of fine-grained alkaline pyroclastic rocks with high permeability and porosity, which favorintensewater-rock interaction. However, a wide-ranging investigation that encompasses methods such as geophysical prospecting and geochemical analysis (including isotope, trace-element, and tracer techniques) will be necessary to gain a better understanding of the groundwater chemistry, aquifer distribution, and water cycling of Ulleung Island.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.190-199
• /
• 2003

This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.15-27
• /
• 2020

Streamflow discharge as a fundamental riverine quantity plays a crucial role in water resources management, thereby requiring accurate in-situ measurement. Recent advances in instrumentations for the streamflow discharge measurement has complemented or substituted classical devices and methods. Among various potential methods, surface current meter using microwave has increasingly begun to be applied not only for flood but also normal flow discharge measurement, remotely and safely enabling practitioners to measure flow velocity postulating indirect contact. With minimized field preparedness, this method facilitated and eased flood discharge measurement in the difficult in-situ conditions such as extreme flood in active ways emitting 24.125 GHz microwave without relying on natural lights. In South Korea, a rectangular shaped instrument named with Microwave Water Surface Current Meter (MWSCM) has been developed and commercially released around 2010, in which domestic agencies charging on streamflow observation shed lights on this approach regarding it as a potential substitute. Considering this brand-new device highlighted for efficient flow measurement, however, there has been few noticeable efforts in systematic and comprehensive evaluation of its performance in various measurement and riverine conditions that lead to lack in imminent and widely spreading usages in practices. This study attempted to evaluate the MWSCM in terms of instrumen's monitoring configuration particularly regarding tilt and yaw angle. In the middle of pointing the measurement spot in a given cross-section, the observation campaign inevitably poses accuracy issues related with different tilt and yaw angles of the instrument, which can be a conventionally major source of errors for this type of instrument. Focusing on the perspective of instrument configuration, the instrument was tested in a controlled outdoor river channel located in KICT River Experiment Center with a fixed flow condition of around 1 m/s flow speed with steady flow supply, 6 m of channel width, and less than 1 m of shallow flow depth, where the detailed velocity measurements with SonTek micro-ADV was used for validation. As results, less than 15 degree in tilting angle generated much higher deviation, and higher yawing angle proportionally increased coefficient of variance. Yaw angles affected accuracy in terms of measurement area.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.3
• /
• pp.63-74
• /
• 2020

Objective : The purpose of this study is to investigate the influence of internal shame and self-control on interpersonal relationships in stroke patients, and to provide evidence and information necessary for clinical trials by analyzing the relationship. Methods : For this study, 150 stroke patients receiving occupational therapy services at institutions where occupational therapists work in Jeollanam-do and Chungnam regions were targeted through email and mail from March 1, 2019 to April 30, 2019. The questionnaire was conducted using general characteristics, Relationship Change Scales(RCS), Self-Control Scales(SCS), and Internalized Shame Scale(ISS) questionnaire. Descriptive statistical analysis was performed for the general characteristics of the study subjects, and t-test and one-way batch variance analysis (ANOVA) were used to compare interpersonal relationships according to general characteristics. The relationship between internalized shame, self-control, and interpersonal competence was analyzed by Pearson's correlation coefficient, and multiple regression analysis was performed to determine the factors affecting interpersonal relationships of stroke patients. Results : As a result of comparing interpersonal competence according to general characteristics, significant differences were found in terms of age and education level. Interpersonal relationships and internalized shame, internalized shame and self-control showed a negative correlation, and self-control and interpersonal relationships had a positive correlation, but self-control was the sub-factors of interpersonal relationships such as openness, sensitivity, intimacy, It was not statistically significant with the communication item. In addition, the items of inadequacy (β =-0.32) and adventure seeking (β =-0.23), which are sub-areas of internalized shame, affect the negative direction, and physical activity (β =0.22), which is the sub-area of self-control and the self-centered (β =0.24) item was found to have an effect on the positive direction. Conclusion : Therefore, additional research is needed that can operate a rehabilitation treatment program that applies various psychological factors for the formation of interpersonal relationships among stroke patients.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.161-166
• /
• 2005

Objectives of this study were to select inbred lines which have a good eating quality and desirable segregates during inbreeding of waxy corn. The 64 inbred lines showed a large variance in their kernel shape and weight. 100-kernel weight, pericarp thickness, kernel length, kernel width, and kernel thickness ranged $11.7\~37.3g,\;11\~77{\mu}m,\;5.8\~9.6mm,\;6.5\~10.0mm$, and $4.1\~6.8mm$, respectively. The physicochemical analysis of 64 waxy corn inbred lines showed crude protein, crude fat, free sugar, and amylopectin content ranging $8.7\~15.8\%,\;2.3\~5.8\%,\;1.1\~11.0\%,\;and\;78.5\~93.8\%$, respectively. The texture property analysis of 64 inbred lines by texture analyzer showed a big difference. Gumminess, hardness, and chewiness of 64 inbred lines ranged $91\~383,\;181\~394,\;and\;73\~370$, respectively. The principal component analysis for 14 characteristics related to kernel quality showed that $73.1\%$ of the total variation could be attributed to the first five principal components. Biological meaning of the principal component was explained clearly by the correlation coefficient between principal components and characters. The first principal component appeared to correspond to small kernel and bad eating quality, The second principal component appeared to correspond to large kernel and good eating quality. The 64 inbred lines were classified into 8 groups by the cluster analysis using the first and second principal component. Among the groups, group VII and VIII included inbred lines with good eating quality that had thin pericarp thickness, low protein content, large kernel, and soft tenderness.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.303-313
• /
• 2015

This study investigates the physicochemical, microbiological and sensory characteristics of seasonal salted-Kimchi cabbages to provide basic data on its uniform quality. Generally, seasonal salted-Kimchi samples had different pH values at initial storage periods, but there was no difference in pH between the seasonal samples when stored for longer periods. The samples from the fall and winter seasons were relatively low in acid and high in solid soluble content compared to samples from other seasons. Salted-Kimchi cabbages in the summer showed the highest microbiological number compared to samples from other seasons. In the sensory evaluation, there were differences in the appearance, aroma, and taste, depending on seasonal samples at different storage periods. The correlation coefficient between the quality characteristics in the seasonal samples showed a positive or negative correlation between the quality characteristics at 1% significant level. In the principal component analysis, F1 and F2 were shown the 51.81% and 14.23% of the total variance (66.21%), respectively. In the PCA pattern of seasonal salted-Kimchi cabbages during storage periods, winter samples were distributed on the top of F2, spring samples were in the middle of F2, while the rest of the samples were distributed on the bottom of F2. According to increasing storage periods, initial storage samples were distributed at the left of F1, while other samples were located at the right of F2.

• Journal of Nutrition and Health
• /
• v.55 no.3
• /
• pp.321-329
• /
• 2022

Riboflavin and its derivatives, flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD), are key components of mitochondrial energy metabolism and oxidation-reduction reactions. Proposed dietary reference intakes for Koreans (KDRIs), that is, estimated average requirements (EARs), for riboflavin, based on current knowledge of riboflavin and riboflavin derivative levels, and glutathione reductase activity, are 1.3 mg/d for men aged 19-64 years and 1.0 mg/d for women aged 19-64 years. By applying a coefficient of variance of 10%, reference nutrient intakes (RNIs) were set at 1.5 mg/d for men aged 19-64 years and 1.2 mg/d for women aged 19-64 years. Likewise, EARs and RNIs of riboflavin intake were proposed for all age groups and women in specific life stages such as pregnancy. Mean adult riboflavin intake for adults aged ≥ 19 years was 1.69 mg/d in Korea National Health and Nutrition Examination Survey (KNHANES) 2020, which was 124.9% of EAR according to the 2020 KDRIs. In the 2015-2017 KNHANES study, the mean riboflavin intake from foods and supplements was 2.79 mg/d for all age groups, and 32.7% of individuals consumed less riboflavin than EAR according to the 2020 KDRIs. For those that used supplements, mean intakes were 1.50 mg/d for riboflavin from foods, 10.26 mg/d from supplements, and 11.76 mg/d from food and supplements, and 5.5% of individuals consumed less riboflavin than EAR. Although the upper limit of riboflavin has not been established, the merits of increasing supplement use warrant further consideration. Also, additional epidemiologic and intervention studies are required to explore the role of riboflavin in the etiology of chronic diseases.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.341-351
• /
• 2017

This study aimed to investigate the medically inclined college students' knowledge, attitude, and compliance on the preventive behaviors of the Middle East respiratory syndrome (MERS). A cross-sectional study was conducted on 251 medically inclined college students in Jeonju Kijeon College from June 8 to 13, 2015, using a scale on the knowledge and attitude toward MERS and a structured questionnaire. The t-test, analysis of variance, and Pearson correlation coefficient were used to analyze the data. The participants consisted of 46.6% college students majoring in dental hygiene, 30.7% in clinical pathology, and 22.7% in emergency rescue, and 69.7% of them had been educated on MERS prevention. This study revealed that students who received MERS prevention training (t=3.457, p=0.001) and female students (t=-2.945, p=0.005) had more knowledge on MERS, while students from the dental hygiene department (F=8.048, p<0.001) and those in their third year (F=3.978, p=0.020) showed a more positive attitude toward MERS. Regarding the correlation between knowledge, attitude, fear of infection and compliance on the preventive behaviors, students were more knowledgeable (r=0.133, p=0.036), presented a more positive attitude (r=0.158, p=0.012) and had more fear of infection (r=0.312, p<0.001), were more likely to comply with the preventive measures. For an effective prevention of MERS, a newly found infectious disease, we suggest that medically inclined college students must improve their knowledge of and have a positive attitude toward MERS infection management at a medical institution in compliance with the MERS infection preventive behaviors. Furthermore, this study shows that an infection management education program should be developed, so that which students could learn about the causes, dissemination routes, and preventive methods of infectious diseases, including the newly discovered ones, prior to their clinical training at a medical institution.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.20-24
• /
• 2009

Objective: In this study, the differences between two reconstruction methods were analyzed by comparing image uniformity and contrast according to Iteration and Subset, which were altered through the Iterative method and True X method, used in Siemens' PET/CT studies. Methods: The Phantom images were obtained by exposure for two minutes per one bed. To determine the image uniformity, the Coefficient of variance was used. Also, in order to compare the contrast value, we measured and analyzed the ratio of the SUV mean of Phantom image's hot spheres and the background. Results: Under the same reconstruction conditions (Iteration and Subset) of CV, the Iterative method was higher than the True X method. In the comparison of the SUV mean ratio of the background and hot sphere, the True X method had a closer rate than the Iterative method. Conclusion: The newly developed True X reconstruction method is better than the previously used Iterative method in terms of uniformity and contrast. However, the date for this study was only obtained using the Phantom device. In order to obtain more accurate and useful information from the experiment, further research should be conducted. Also, it is necessary to find the appropriate standards for Iteration and Subset for further experimentation.