• ETRI Journal
• /
• 제40권5호
• /
• pp.643-652
• /
• 2018

Dysarthria is a degenerative disorder of the central nervous system that affects the control of articulation and pitch; therefore, it affects the uniqueness of sound produced by the speaker. Hence, dysarthric speaker recognition is a challenging task. In this paper, a feature-extraction method based on deep belief networks is presented for the task of identifying a speaker suffering from dysarthria. The effectiveness of the proposed method is demonstrated and compared with well-known Mel-frequency cepstral coefficient features. For classification purposes, the use of a multi-layer perceptron neural network is proposed with two structures. Our evaluations using the universal access speech database produced promising results and outperformed other baseline methods. In addition, speaker identification under both text-dependent and text-independent conditions are explored. The highest accuracy achieved using the proposed system is 97.3%.

• 한국소음진동공학회논문집
• /
• 제19권6호
• /
• pp.620-627
• /
• 2009

Shaking table test was carried out to obtain dynamic characteristics of TLCDs with uniform and non-uniform sections for both horizontal and vertical tubes. The input to the table is harmonic acceleration with constant magnitude. The output is horizontal dynamic force which is measured by load cell installed below the TLCD. Transfer functions are experimentally obtained using the ratio of input and output. Natural frequency, the most important design factor, is compared to that by theoretical equation for TLCDs with five different water levels. System identification process is performed for experimentally obtained transfer functions to find the dynamic characteristics of head loss coefficient and effective mass of TLCDs. It is found that their magnitudes are larger for a TLCD with non-uniform section than with uniform section and natural frequencies are close to theoretical ones.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1564-1569
• /
• 2009

Project managers play a key role in cost, time, and quality of a project. Selection of an appropriate project manager, therefore, is considered as one of the most important decisions in any construction project. It should be noted that most important decision makings are carried out by the project manager throughout the project. Traditionally, project manager selection in construction companies in Iran is through organizing an interview with candidates and selecting the most appropriate choice in accordance with the capabilities, potentials and individual specifications coupled with the requirements of the project. In the same direction, organizing interview on selection of appropriate candidate is usually carried out by senior managers of companies. Determination of the most important criteria for selection of project managers and also identification of significance coefficient of each criterion can highly help senior managers of companies to make sound selection decisions. In this paper, a numerical model has been considered for determination of significance of each criterion, details of which are submitted for selection of project manager in Iranian petrochemical, oil and gas sector companies. For this reason, all criteria- considered by senior managers of the companies under study- are first determined. Then, information obtained through 38 interviews, conducted by senior managers of the mentioned companies while selecting project manager, is analyzed. Significant coefficient of each criterion is calculated through the accumulated data using fuzzy curves method.

• 동력기계공학회지
• /
• 제15권3호
• /
• pp.18-24
• /
• 2011

In this study, the reflection of the L(0,2), axially symmetric guided elastic wave from defects in pipes above ground is examined using finite element method. Phase and group velocity dispersion curves for the pipe were presented for the selection of the excitation mode. Some simple signal processing was applied to determine the amplitude of each of the reflected waves and to calculate the reflection coefficient. The results show the reflection coefficient of this mode is very close to a linear function of the circumferential extent of the defect. The motivation for the work was the development of a technique for inspecting chemical plant pipelines, but the study addresses the nature of the reflection function and its general applicability.

• 로봇학회논문지
• /
• 제6권3호
• /
• pp.284-291
• /
• 2011

This paper presents the estimation of the frictional coefficient of the wheel-legged robot with hip joint actuation producing maximum tractive force. Slip behavior for wheel-legged robot is analytically explored and physically understood by identification of the non-slip condition and derivation of the torque limits satisfying it. Utilizing results of the analysis of slip behavior, the frictional coefficients of the wheel-legged robot during stance phase are numerically estimated and finally this paper suggests the pseudo-algorithm which can not only estimate the frictional coefficients of the wheel-legged robot, but also produce the candidate of the touch down angle for the next stance.

• Journal of Hydrospace Technology
• /
• 제1권1호
• /
• pp.66-74
• /
• 1995

Unknown parameters can be determined by system identification techniques. Extended Kalman filter method was introduced as a real time estimator of hydrodynamic derivatives but it has the problem named the coefficient drift. In this study, 2nd order filter estimates hydrodynamic derivatives in Abkowitz model In order to reduce the coefficient drift, parallel processing is used. The measured state and ship trajectory are compared with the estimated values. Parallel processing of 2nd order filter gives very similar results to parallel processing of extended Kalman filter. Parallel processing cannot not remove the coefficient drift perfectly, but it reduces the estimation error.

• Smart Structures and Systems
• /
• 제14권5호
• /
• pp.831-845
• /
• 2014

This paper proposed a discrete wavelet transform based method for time-varying physical parameter identification of shear type structures. The time-varying physical parameters are dispersed and expanded at multi-scale as profile and detail signal using discrete wavelet basis. To reduce the number of unknown quantity, the wavelet coefficients that reflect the detail signal are ignored by setting as zero value. Consequently, the time-varying parameter can be approximately estimated only using the scale coefficients that reflect the profile signal, and the identification task is transformed to an equivalent time-invariant scale coefficient estimation. The time-invariant scale coefficients can be simply estimated using regular least-squares methods, and then the original time-varying physical parameters can be reconstructed by using the identified time-invariant scale coefficients. To reduce the influence of the ill-posed problem of equation resolving caused by noise, the Tikhonov regularization method instead of regular least-squares method is used in the paper to estimate the scale coefficients. A two-story shear type frame structure with time-varying stiffness and damping are simulated to validate the effectiveness and accuracy of the proposed method. It is demonstrated that the identified time-varying stiffness is with a good accuracy, while the identified damping is sensitive to noise.

• 동의생리병리학회지
• /
• 제32권3호
• /
• pp.165-170
• /
• 2018

The aim of this study was to investigate the predictive validity of the five organ pattern identification questionnaire(FOPIQ). Data collection was conducted from 190 people who were randomly selected from the general population living in D city from October 2016 to June 2017, and the collected data were analyzed by SPSS 23.0 Statistics Program. Pearson correlation coefficient was used to know the relation between the expert's score and FOPIQ's one. The cut-off value, sensitivity and specificity were analyzed through ROC-curve. Significant p was <.05. The pearson correlation coefficient was .735, .756, .762, .736, and .513 between individual score of FOPIQ and that of the experts in liver, heart, spleen, lung, and kidney, respectively. The cut-off value of the FOPIQ was 46.209, 47.276, 45.336, 48.823, and 42.508 in liver, heart, spleen, lung, and kidney respectively. The AUC derived from the cut-off value of the FOPIQ was .907, .854, .888, .902, and .781 respectively. This study suggests that the FOPIQ could be valid to apply for general population in clinics as well as health checkups.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.417-422
• /
• 2017

비정상행위 탐지는 데이터로부터 특징을 추출하여 정상 행위 모델을 만들어, 이 정상 모델로부터 얼마나 벗어나 있는 가를 찾아내어 탐지하는 기법이다. 즉, 특정 기기가 생성하는 데이터를 기반으로 기기의 오류를 탐지하거나 사회망 데이터에서의 사용자 행위 변화를 찾아내어 비정상행위를 탐지하는 데 활용할 수 있다. 본 논문에서는 순위 상관 계수를 이용하여 건물 내의 기기의 비정상적인 데이터를 탐지하고자 한다. 에너지 절약 문제에 대한 관심이 높아짐에 따라 에너지를 효율적으로 사용하기 위해 여러방법들이 제안되었다. IT 기술의 발달과 더불어 공조 시스템(HVAC)이 건물에 도입되어 활용되고 있으며, 이 시스템을 통하여 에너지 소비의 문제점을 찾고 에너지를 효율적으로 관리할 수 있다. 따라서 본 논문은 공조 시스템에 속한 각 기기간의 순위 관계 변화를 관찰함으로써 이상 현상 탐지의 효율성을 높이는 방법을 제안하며, 사회망 데이터 내에서의 비정상행위 탐지 가능성도 함께 제안한다.

• 대한한방내과학회지
• /
• 제37권4호
• /
• pp.631-644
• /
• 2016

Objectives: The purpose of this study was to evaluate the reliability and validity of an instrument for pattern identification and evaluation in chemotherapy-induced peripheral neuropathy (CIPN).Methods: The study consisted of 66 patients with CIPN (visual analog scale ≥30 mm, Eastern Cooperative Oncology Group ≤2). The test-retest reliability of the instrument for pattern identification and evaluation in CIPN was tested twice with the same patients in one week.Results: Pearson’s coefficient test-retest reliability of the instrument was 0.601-0.777. The internal reliability of each part was 0.619-0.811. To confirm the validity of the instrument for pattern identification and evaluation for CIPN, the correlation between the score for each identification pattern and that of other CIPN instruments was analyzed. The results revealed a positive correlation between the Functional Assessment of Cancer Therapy-General and CIPN-20.Conclusion: The reliability of the instrument for pattern identification and evaluation in CIPN was moderate, and the validity analysis revealed a positive correlation.