• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.97-104
• /
• 2018

The finite difference software Flac3D is used to study the influence of tunnel burial depth, tunnel diameter and lateral pressure coefficient of original rock stress on the stress and deformation of tunnel surrounding rock under sandstone condition. The results show that the maximum shear stress, the radius of the plastic zone and the maximum displacement in the surrounding rock increase with the increase of the diameter of the tunnel. When the lateral pressure coefficient is 1, it is most favorable for surrounding rock and lining structure, with the increase or decrease of lateral pressure coefficient, the maximum principal stress, surrounding displacement and plastic zone range of surrounding rock and lining show a sharp increase trend, the plastic zone on the lining increases with the increase of buried depth.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.672-677
• /
• 2004

This paper is on determination method of preconsolidation pressure and consolidation coefficient using Kores University Calibration Chamber System(KUCCS). High-quality, large-size cohesive soil specimen was prepared by using two-stage slurry consolidation technique, which has many advantage for research and calibration purpose. The result from consolidation stage in KUCCS was compared with results of oedometer test. The results by Casagrcnde method gave very good agreement with preconsolidation pressure in slurry consolidometer. And, the predicted consolidation coefficient by log t method showed agreement with the experimental results in KUCCS.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.16-20
• /
• 2007

In this paper, convective heat transfer and flow characteristics of $Al_2O_3$ nanoparticles suspended in water flowing through uniformly heated tubes are experimentally investigated under laminar flow regime. The heat transfer coefficient and the pressure drop of nanoparticles suspended in water are experimentally presented according to the pumping power. In addition, the heat transfer coefficient and the pressure drop of $Al_2O_3$ nanoparticles suspended in water are compared with those of pure water under the fixed pumping power. It is shown that the heat transfer coefficient of $Al_2O_3$ nanofluids with 0.1% volume fraction is enhanced by about 12% although the increment of the pressure drop of those is 4% compared with those of pure water.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.437-448
• /
• 2017

The problem of flow through the vent is formulated as an unsteady, nonlinear, ordinary differential equation and solved using Runge-Kutta method to obtain pressure inside payload faring. An inverse problem for prediction of the discharge coefficient is presented employing measured internal pressure of the payload fairing during the ascent phase of a satellite launch vehicle. A controlled random search method is used to estimate the discharge coefficient from the measured transient pressure history during the ascent period of the launch vehicle. The algorithm predicts the discharge coefficient stepwise with function of Mach number. The estimated values of the discharge coefficients are in good agreement with differential pressure measured during the flight of typical satellite launch vehicle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.37-42
• /
• 2003

An experiment was performed to study heat transfer characteristics between corrugated heat exchanger and flat plate type one. While heat capacity(13.86kW) was provided constantly and the flow speed was varied from 2.8 to 17.9m/s, The temperature and the pressure drop were measured. Furthermore, Heat transfer coefficient, Colburn factor and Nusselt number were calculated using them. With increase of the flow speed for both exchangers, the coefficient and the pressure drop increased, but Colburn factor decreased. The coefficient, pressure drop and Colburn factor of the corrugated type were all higher than those of the flat one, which is due to the flow interruption with recirculation and reattachment of the corrugated type. The empirical correlations of Nusselt number were suggested for the tested two heat exchangers.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.16-21
• /
• 2016

This study is a numerical analysis of the flow characteristic of a quick coupler. The quick coupler is a popular coupling tool for pipelines in hydraulic and pneumatic systems. In this study, the flow characteristic of a quick coupler outlet is conducted about the flow coefficient. The quick coupler is analyzed for improving flow and confirmed with the study results. The velocities with pressure distribution according to inlet and outlet pressure drop of the coupler are also compared. The flow coefficient is analyzed according to the flow analysis result for each pressure drop. When the pressure drop is 1 psi, the flow coefficient (Cv) matched about 98% of the value provided by the actual product.

• 설비공학논문집
• /
• 제11권2호
• /
• pp.215-223
• /
• 1999

Evaporation heat transfer coefficient and pressure loss were measured for three different micro-fin tubes and a smooth tube. The experiments were carried out with R-22 over a wide range of vapor Quality, mass velocity and heat flux. Heat transfer coefficient of the tube with slightly modified fin shape was found to be higher than that of the commercial reference tube by 60%. The improvement of heat transfer has been achieved without noticeable increase of pressure loss. Heat transfer coefficient was increased with increasing quality, refrigerant mass flux, and heat flux. However, the effect of refrigerant mass flux and heat flux was not great. Heat transfer coefficient at bottom was lower than that at top of the tube in low quality region, which suggested the existence of stratification in the micro-fin tube. Pressure drop was linearly increased with increasing refrigerant quality and was proportional to about square of mass flux.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.5-10
• /
• 2015

Dust collector is one of the most widely used equipment among the method of separating particles, it filters exhaust gas having various kinds of dusts through several filters installed on parallel. This research investigated the moving characteristic of Honeycomb-type carbon filter in pressure drop of smoking collector's ventilation system. It also compared pressure transmission coefficient through pressure drop according to flow velocity change.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.5696-5703
• /
• 2012

본 연구는 자동차용 에어백 장치를 구성하고 있는 필터의 압력변화 특성을 해석하였다. 에어백 필터를 통한 압력 변화는 에어백을 부풀게 하는 기체의 압력에 직접적인 영향을 미친다. 그러나 현제 필터의 어느 설계인자가 압력변화에 얼마나 영향을 미치는지에 대한 정확한 기준이 불분명 하다. 또한 에어백 필터의 특성에서 압력 손실계수는 실험적 방법으로 평가하기에는 많은 어려움이 따른다. 이를 해결하기 위해서, 시뮬레이션 해석을 이용한 필터의 압력손실계수 해석방법을 제시하였다. 그러나, 일반적인 시뮬레이션 해석에서 에어백 필터와 같이 순간적으로 갑자기 증가하는 압력변화 해석은 불가능하다. 따라서, 보간법과 축척 축소방법을 적용하여 에어백 압력 변화 해석을 수행하였다. 또한, 에어백 필터의 압력손실계수에 대한 시뮬레이션 해석을 통하여 필터 설계에 대한 가이드 라인을 제시할 수 있었다.

• 항공우주기술
• /
• 제6권2호
• /
• pp.126-133
• /
• 2007

유공압 설비 설계에 있어서 중요한 요소인 유공압 구성품의 압력손실계수를 측정하기 위한 시험 설비의 설계, 제작 그리고 일련의 시험 내용 및 PS(Pyrostarter, 고체추진제 가스발생기) 연소시험 결과와의 비교 분석 내용을 정리한다. 최종적으로 blow-down 시스템을 이용하여 간단한 시험 설비를 구축하였으며 PS에 사용되는 필터들의 압력손실계수를 측정하였다. 시험 설비를 통해 PS의 CQSF 압력손실계수 K를 획득하였으며, PS 연소시험 결과와의 비교를 통해 2% 내외의 높은 신뢰도의 압력 손실 예측이 가능한 것으로 나타났다. 한편 PS 필터의 K와 PS 연소압과의 관계를 유도하여 PS 연소시험 결과와 일치함을 보였으며, 향후 PS 개발에서 필터의 K를 활용하여 PS 추진제의 연소속도를 향상시킬 수 있을 것으로 기대된다.