• 산업공학
• /
• 제8권3호
• /
• pp.221-230
• /
• 1995

Computer Aided Process Planning(CAPP) has been emerged as playing a key role in Computer Integrated Manufacturing(CIM) as the most critical link to integrate CAD and CAM, and therefore much effort has been dedicated to the structure and creation of CAPP system. In this research, a modified variant CAPP system based on process planning rule base is developed, which generates process plans for parts automatically where GT code data are provided as input. In order to execute process planning, rules are constructed in the form of Decision Tree and this system has the inference engine that extracts the results of process planning on the basis of tree-structured rules which are concerned with manufacturing processes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.476-478
• /
• 2007

This paper presents an efficient data acquisition scheme to obtain a minimum CPU memory, optimized communication speed, and simplified program source code in a monitoring system. It is different in the number of utilized data from the conventional method which acquires every raw data. The proposed method uses only restrictive data required to reconstruct the original signal. The basic principle is to apply the FFT-IFFT method in data transferring process. To verify the high-performance of the proposed scheme, computer-aided simulation and experiments using a PV power monitoring system are carried out. It also presents the analyzed results the relationship between FFT's order and Gibb's Phenomenon.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.141-146
• /
• 2005

In the present study, the characteristic of warpage and flow balance for family mould, which is able to mold parts with different shapes in a mold, is considered. To obtain an optimal gate and runner system, plastic injection molding analysis with commercial code is performed. Design and manufacturing of family mould is then carried out on the basis of this computer aided engineering result. Flow balance and warpage comparisons between experiment and numerical analysis give good agreement with each other. However, it was shown that results of warpage measured by CMM was about $20\~55\%$ lower than those of numerical analysis.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3352-3357
• /
• 2012

본 논문은 열매체(Synthetic Heat Transfer Fluid) 보일러의 화재원인을 분석하기 위하여 3차원 자동설계 프로그램인 CATIA를 활용하여 설계하였다. 또한 3차원 유한요소 코드인 ANSYS를 활용하여 설계된 열매체보일러에 대하여 구조해석을 실시하였다. 구조해석을 통하여 열매체보일러의 정상상태와 화재 후의 최대온도(maximum temperature), 최대응력(maximum stress), 최대변형율(maximum strain) 등을 구하였다.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4075-4079
• /
• 2010

본 논문의 목적은 현재 도기가스, 상하수도 및 화학배관 파이프 등의 플라스틱 배관 공사에서 사용되는 파이프 융착기를 3차원 설계하고 융착 시 발생하는 문제점을 해결하기 위하여 구조해석에 의한 검증작업을 거쳐 구조를 개선한다. 현장에서 파이프 융착 작업 시 융착기 크램프에 크랙이 발생하므로 이를 개선하기 위하여 융착기의 구조를 변경하는 설계치를 제시함으로서 작업의 효율성을 높이고 기술경쟁력을 향상시킨다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (1)
• /
• pp.415-417
• /
• 2001

HLA(High Level Architecture)는 차세대 DIS(Distributed Interactive Simulation)를 이어 네트워크 분산 시뮬레이션의 기반이 되는 표준 아키텍쳐이다. 이 HLA 시스템의 개발 과정에서 FEDEP(Federation Development and Execution Process) Model이 제안되었는데, FEDEP의 목적은 federation 개발자가 application의 요구를 충족시킬 수 있도록 federation 개발 및 실행에 대한 guideline을 정하는 것이다. FEDEP의 일련의 process들 중에서 노동집약적인 과정은 CASE(Computer Aided Software Engineering) tool을 사용함으로써 보다 강화되고 능률적으로 이루어질 수 있다. 본 논문에서 소개하는 HLA Application Builder 는 federate 와 federation을 자동적으로 생성하는 CASE tool 로서, 자동적인 FED(Federation Execution Data)file 및 C++ source code를 생성함으로써 HLA Federation 개발에 있어서의 인력(manpower)을 크게 줄일 수 있다. 본 논문에서는 HLA에 대한 배경지식과 HLA Application Builder 개발의 필요성과 구현, 그리고 실제 예를 들어서 HLA Application Builder가 어떻게 federation 개발에 사용되는지에 대해서 설명한다.

• Earthquakes and Structures
• /
• 제17권1호
• /
• pp.17-29
• /
• 2019

The present study aims to present a comprehensive understanding of the performance of neighboring multi-story buildings with different dynamic characteristics under blast loads. Two different scenarios are simulated in terms of explosion locations with respect to both buildings. To investigate the effect of interaction between the neighboring buildings in terms of the induced responses, the separation gap is set to be sufficiently small to ensure collisions between stories. An adequately large separation gap is set between the buildings to explore responses without collisions under the applied blast loads. Several blast loads with different peak pressure intensities are employed to perform the dynamic analysis. The finite-element toolbox Computer Aided Learning of the Finite-Element Method (CALFEM) is used to develop a MATLAB code to perform the simulation analysis. The dynamic responses obtained in the scenarios considered herein are presented comparatively. It is found that the obtained stories' responses are governed mainly by the location and intensity of the applied blast loads, separation distances, and flexibility of the attacked structures. Moreover, explosions near a light and flexible building may lead to a significant decrease in blast resistance because explosions severely influence the dynamic responses of the building's stories.

• 대한설비공학회지:설비저널
• /
• 제6권4호
• /
• pp.262-266
• /
• 1977

A new computer system for the stress analysis and design of piping network has been devlo-ped in this study. For the stress analysis, the system utilizes the finite element technique in which the frontal technique is used as the equation solver. The element library of the system has (1) Pipe Element (2) Beam Element, (3) Hanger Element and (4) Spring Element which should be sufficient to model the entire piping system including flexible supports, joints, piping rack and hangers. Based on the element stresses, code check has been performed and the safety factor for each element is calculated.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.25-31
• /
• 2009

The most important component of wind turbine is rotor blades. The developing method of wind turbine was focused on design of rotor blade. By the way, the design of a rotating body is more decisive process in order to adjust the performance of wind turbine. For instance, the design allows the designer to specify the wind characteristics derived by topographical map. The iterative solver is then used to adjust one of the selected inputs so that the desired rotating performance which is directly related to power generating capacity and efficiency is achieved. Furthermore, in order to save the money for manufacturing the rotor blades and to decrease the maintenance fee of wind power generation plant, while decelerating the cut-in speed of rotor. Therefore, the design and manufacturing of rotating body is understood as a substantial technology of wind power generation plant development. The aiming of this study is building-up the profitable approach to designing of rotating body as a system for the wind power generation plant. The process was conducted in two steps. Firstly, general designing and it’s serial testing of rotating body for voltage measurement. Secondly, the serial test results above were examined with the CFD code. Then, the analysis is made on the basis of amount of electricity generated by rotor-blades and of cut-in speed of generator.

• 한국통신학회논문지
• /
• 제32권6A호
• /
• pp.537-543
• /
• 2007

본 논문은 MIMO-OFDM 시스템에서 터보 처리 기법 (Turbo-BLAST)을 위한 새로운 조기 정지 기법을 제안한다. 터보 처리 기법의 높은 복잡도를 줄이기 위해서는 외부 반복 횟수를 줄이는 일이 필수적이다. IEEE 802.16e Mobile WiMax와 같은 시스템에서는 전송된 데이터 버스트의 마지막 인코딩 패킷을 제외하면 CRC 비트가 부가되지 않는다. 따라서 이러한 시스템에서는 CRC 비트의 도움 없이 반복을 종료할 수 있는 조기 정지 기법이 필요하다. 제안된 기법은 수신된 패러티 비트들과 수신된 정보 비트들로부터 재 부호화된 패러티 비트들 간의 부호 변화를 관찰함으로써 수행된다. 또한, IEEE 802.16e와 같이 tail-biting 부호를 가지는 시스템의 경우에 재 부호화의 복잡도를 절반으로 줄이는 방법이 제안된다. 컴퓨터 모의실험 결과는 제안된 조기 정지 기법이 종래의 조기 정지 기법에 비해 더 적은 수의 평균 반복 횟수를 가지고 GENIE aided 기법과 동등한 수준의 성능을 가짐을 보인다.