• 방사선산업학회지
• /
• 제11권3호
• /
• pp.157-165
• /
• 2017

In this paper, we calculate the light photons collection efficiency of large-volume plastic scintillation detector mainly used for radiation portal monitor (RPM). A Monte Carlo light photon transport code, DETECT2000, were used to quantitatively evaluate light collection efficiency of plastic scintillation detector. DETECT2000 calculated the placement of light collection efficiency based on the energy spectrum. We calculated the light collection efficiency relative to the position of the energy spectrum that proportional to the placement of the source. The $850{\times}285{\times}65mm^3$ size of polyvinyl toluene (PVT) scintillator was used for measurements. Through DETECT2000 simulation, the light collection efficiency of $5{\times}5$ arrays were calculated and verification was performed by comparing with experimentally measured. And then, the corrected MCNP simulation by applying the light collection efficiency in $21{\times}13$ arrays was compared and analyzed. Comparing the Monte Carlo simulation with measured results, it shows an average difference of 10.1% in $5{\times}5$ arrays. Particularly, about twice of the difference was found in the edge of first column, which coupled with PMT. In whole $5{\times}5$ array, the overall ratio was the same except for the first column. And then comparing the energy spectra of the $21{\times}13$ array with and without the light collection efficiency, it shows a difference of 6.69% in Compton edge area. The DETECT2000 based light collection efficiency simulation showed well agreement with the point source experiment. And comparing with measured energy spectra, we could compare the differences according to whether or not the light collection efficiency was applied. As a results, it is possible to increase the accuracy and reliability of Monte Carlo simulation results by pre-calculating the light collection efficiency according to the PVT geometry by using the DETECT2000.

• 한국조경학회지
• /
• 제37권4호
• /
• pp.72-85
• /
• 2009

본 연구는 인간 활동을 담는 형식과 의미의 총체라 할 수 있는 서원, 그 중에서도 경상남도 함양의 남계서원을 대상으로 공간 및 시각구성상에 내재된 형식미와 의미 파악을 통해 서원 조영에 담겨진 경관짜임 원리를 풀이하고 현대 유사 전통적 공간의 경관설계 시 적용하기 위한 착안점을 구하기 위해 시도되었다. 남계서원은 생성과 풍요를 거쳐 초월과 회귀로 이어지는 비산비야(非山非野)의 풍수적 명처[연화부수형]에 생거사유(生居死幽) 형국에서부터 치(置)와 화(和)를 이루고 있다. 그리고 사당-내삼문-강당-동서재-외삼문으로 이어지는 위계는 일상제-삼신-오제로 연결되는 삼신오제사상의 투영이자 주자가례에 의한 예제적 틀을 준용한 비례부동(非禮不動)의 의미 넣기 기법이다. 또한 남계서원의 환경설계에는 산수의 물질적 대립 항 그리고 전후(前後), 종횡(縱橫), 동정(動靜)이라는 방향과 운동의 이진부호적 복합체계를 개입시켜, 경직된 축선을 고집하지 않으면서도 자연지형에 밀착된 건물과 마당의 공간 및 시각구성상의 비대칭 균형원칙을 추구하여 '치와 화'의 교집합 공간을 구축하였다. 한편, 건물 이름 짓기는 학문수양과 관련하여 성리학적 가르침과 풍수사신사(風水四神砂) 구조와 연계시켜 이루어짐으로서 기능과 의미를 일체화시킨 치와 화의 경관 놓기와 경관 맞추기가 드러나고 있다. 또한, 건물과 마당의 폐쇄감으로 볼 때 강학(講學) 및 유상(遊賞)공간 그리고 제향공간은 그 공간성격에 따라 개방감과 위요감, 긴장감과 안도감, 상승감과 위계감이 적절히 부여되는 등 청각적으로 의사 전달이 가능한 인간적 척도 개념이 반영되고 있다. 남계서원의 초기 건립과 이후의 변모과정에서 드러난 자연과 유연하게 이어지는 기능, 완결을 지향하는 비완결의 열림 그리고 긴장과 이완이 반복되는 동세적 아름다움을 구현하기 위한 치(置-놓기)와 자연과 일체감을 갖는 질서와 연속, 기념성과 일상성의 공유 등을 구현하기 위한 화(和-맞추기)의 경관짜임 의도는 오늘날 토지이용계획은 물론 캠퍼스 환경설계 분야에 시사하는 바가 크다.

• 한국의상디자인학회지
• /
• 제14권3호
• /
• pp.147-160
• /
• 2012

The costumes as an expression system in film are inserted intentionally for a particular purpose. Costumes in film, namely the cinematic dress code, and that in reality are dissimilar in meaning structure. The costumes in film perform a role of a complicated eye-catcher in correlation with the other filmic factors. But the previous studies on the costumes in film are focused on the keywords 'fashion style', 'fashion trend', or 'PPL (product placement)'. In film studies, however, the costumes should be observed from the point of view as semiosis, not as fashion, in other words, from the angle of symbol, icon and index. And the meaning and the process of the communication, which that produce, should be pointed out. It could expose, that costumes play one of the key roles for the developing of narratives and the creating of characters in film. Therefore, this study's aim is to examine the semiosis of costumes in film and to analyse the dress code, dress plot, and dress message in (1990) by Garry Marshall. But this work does not try to indicate the problems of the film-semiotics or to intensify the concept of the semiotic terminology. Thus, this study attempts to approach the theme of costumes in film from the perspective of the semiosis and its meaning process. With this, it has been proved, that semiotic systems are in hiding beyond the conventional forms of cinematic costumes and its natural harmony with characters.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.55-63
• /
• 2016

Calculation of the core neutronic parameters is one of the key components in all nuclear reactors. In this research, the energy spectrum and spatial distribution of the neutron flux in a uranium target have been calculated. In addition, sensitivity of the core neutronic parameters in accelerator-driven subcritical advanced liquid metal reactors, such as electron beam energy ($E_e$) and source multiplication coefficient ($k_s$), has been investigated. A Monte Carlo code (MCNPX_2.6) has been used to calculate neutronic parameters such as effective multiplication coefficient ($k_{eff}$), net neutron multiplication (M), neutron yield ($Y_{n/e}$), energy constant gain ($G_0$), energy gain (G), importance of neutron source (${\varphi}^*$), axial and radial distributions of neutron flux, and power peaking factor ($P_{max}/P_{ave}$) in two axial and radial directions of the reactor core for four fuel loading patterns. According to the results, safety margin and accelerator current ($I_e$) have been decreased in the highest case of $k_s$, but G and ${\varphi}^*$ have increased by 88.9% and 21.6%, respectively. In addition, for LP1 loading pattern, with increasing $E_e$ from 100 MeV up to 1 GeV, $Y_{n/e}$ and G improved by 91.09% and 10.21%, and $I_e$ and $P_{acc}$ decreased by 91.05% and 10.57%, respectively. The results indicate that placement of the Np-Pu assemblies on the periphery allows for a consistent $k_{eff}$ because the Np-Pu assemblies experience less burn-up.

• 지능정보연구
• /
• 제22권4호
• /
• pp.247-264
• /
• 2016

저출산 및 인구 고령화가 가속화되면서, 중장년 퇴직자 등 노동 소외 계층의 취업난 해결은 우리 사회의 핵심 과제로 등장하고 있다. 온라인에는 수많은 일자리 요구 정보가 산재해 있으나, 이를 중장년 구직자에게 제대로 매칭시키지는 못하고 있다. 워크넷 취업 로그에 따르면 구직자가 선호하는 직종에 취업하는 경우는 약 24%에 불과하다. 그러므로, 이러한 문제를 극복하기 위해서는 구직자에게 일자리 정보를 매칭시킬 때 선호하는 직종과 유사한 직종들을 추천하는 소프트 매칭 기법이 필수적이다. 본 연구는 중장년층에 특화된 소프트 직업 매칭 알고리즘과 서비스를 고안하고 개발하여 제공하는 것을 목표로 한다. 이를 위하여 본 연구에서는 1) 대용량의 구직 활동 기록인 워크넷 로그로부터 중장년층의 일자리 특성 및 요구 추세를 분석하였다. 2) 중장년층의 일자리 추천을 위해 직종 유사도 기준으로 일자리 분류표(KOCM)를 재정렬하였다. 이 결과를 이용하여, 3) 중장년에 특화된 인력 고용 소프트 매칭 직업 추천 알고리즘(MOMA)을 개발하여 구인 구직 웹사이트에 적용하였다. 자체 저작한 중장년층 특화 일자리 분류표(KOCM)를 이용한 소프트 일자리 매칭 시스템의 정확도를 측정하였을 때, 실제 고용 결과 기준, 하드 매칭 대비 약 20여 배의 성능 향상을 보였다. 본 연구내용을 적용하여 개발한 중장년층 특화 구직 사이트는 중장년층의 구직 과정에서 입력 정보 부담을 최소화하고 소프트 매칭을 통해 사용자의 요구직종에 적합한 일자리를 정확하고 폭넓게 추천함으로 중장년층의 삶의 질 향상에 기여할 수 있을 것으로 기대된다.

• Journal of Communications and Networks
• /
• 제17권5호
• /
• pp.499-505
• /
• 2015

We analyze the performance of multistage cooperation in decode-and-forward relay networks where the transmission between source and destination takes place in $T{\geq}2$ equal duration and orthogonal time phases with the help of relays. The source transmits only in the first time phase. All relays that can decode the source's transmission forward the source's message to the destination in the second time phase, using a space-time code. During subsequent time phases, the relays that have successfully decoded the source message using information from all previous transmitting relays, transmit the space-time coded symbols for the source's message. The non-decoding relays keep accumulating information and transmit in the later stages when they are able to decode. This process continues for T cooperation phases. We develop and analyze the outage probability of multistage cooperation protocol under orthogonal relaying. Through analytical results, we obtain the near-optimal placement strategy for relays that gives the best performance when compared with most other candidate relay location strategies of interest. For different relay network topologies, we also investigate an interesting tradeoff between an increased SNR and decreased spectral efficiency as the number of cooperation stages is increased. It is also shown that the largest multistage cooperation gain is obtained in the low and moderate SNR regime.

• Structural Engineering and Mechanics
• /
• 제23권1호
• /
• pp.43-61
• /
• 2006

An investigation of the effectiveness of the interface treatment when column concrete jacketing is performed is presented. Alternative methods of interface connection were used in order to investigate the performance of strengthened concrete columns. These connecting techniques involved roughening the surface of the original column, embedding steel dowels into the original column and a combination of these two techniques. The experimental program included three strengthened specimens, one original specimen (unstrengthened) and one as-built specimen (monolithic). The specimens represented half height full-scale old Greek Code (1950's) designed ground floor columns of a typical concrete frame building. The jackets of the strengthened specimens were constructed with shotcrete. All specimens were subjected to displacement controlled earthquake simulation loading. The seismic performance of the strengthened specimens is compared to both the original and the monolithic specimens. The comparison was performed in terms of strength, stiffness and hysteretic response. The results demonstrate the effectiveness of the strengthening methods and indicate that the proper construction of a jacket can improve the behaviour of the specimens up to a level comparable to monolithic behaviour. It was found that different methods of interface treatment could influence the failure mechanism and the crack patterns of the specimens. It was also found that the specimen that combined roughening with dowel placement performed the best and all strengthened columns were better at dissipating energy than the monolithic specimen.

• 한국멀티미디어학회논문지
• /
• 제22권2호
• /
• pp.299-310
• /
• 2019

Most web documents are written in Cartesian coordinates, so the study of vertical arrangement of text has been well organized, while the study of circular arrangement is very early. With the recent development of circular display devices, the demand for circular arrangement of texts is increasing. Thus, we proposed a CSS3 extended specification of polar coordinate layout for the circular placement of text. First, we defined the concept of fan model for the text arrangement in polar coordinate which is corresponding to box model in Cartesian coordinate. And, we described new definition on the directions of sentence, paragraph and text orientation in polar coordinate. Based on this new definitions, we developed the extended specification consisting of three parts. A part for setting the fan model, a part for setting directions, and a part for setting typesetting properties. To verify the feasibility of the proposed specification in current web browsers, a preprocessor was developed and sample contents were examined. We compared the code length of the sample contents implemented using other JavaScript library CssWarp.js so as to verify the efficiency of the proposed specification.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제9권11호
• /
• pp.247-249
• /
• 2020

4차 산업혁명 시대에 다양한 분야에서 ICT 기술 간 융합에 대한 요구가 증가하고 있다. 이에 마쳐 데이터, 네트워크, 인공지능 기술이 결합한 새로운 용어인 DNA(Data, Network, AI)가 사용 중이다. DNA는 지능형 응용 및 서비스 개발에 있어 잠재적 기술력을 가지고 있다. 이에 본 논문에서는 DNA 기술 기반의 논리적 포그 네트워크 기반의 서비스 이미지 배치 기술, 산업용 무선 센서 네트워크에서의 기계학습 기반 이동성 기술, 뇌신호 주파수 특성을 이용한 CNN 기반 BCI 성능 예측 기술, 소스코드 주제를 이용한 인공신경망 기반 경고 분류 방법 기술, 챗봇 환경에서 데이터 시각화 인터랙션을 위한 자연어처리 기술에 대한 심사 완료된 논문들을 소개한다.

• Structural Engineering and Mechanics
• /
• 제50권1호
• /
• pp.89-103
• /
• 2014

According to experimental studies made so far, design formula of shear characteristics suggested by ISO 22762 and JEAG 4614, representative design code for Lead Rubber Bearing(LRB) shows dependence caused by changes in compressive stress. Especially, in the case of atypical special structure, such as a nuclear power structure, placement of seismic isolation bearing is more limited compared to that of existing structures and design compressive stress is various in sizes. As a result, there is a difference between design factor and real behavior with regards to shear characteristics of base isolation device, depending on compressive stress. In this study, a full-scale low hardness device of LRB, representative base isolation device was manufactured, analyzed, and then evaluated through an experiment on shear characteristics related to various compressive stresses. With design compressive stress of the full-scale LRB (13MPa) being a basis, changes in shear characteristics were analyzed for compressive stress of 5 MPa, 10 MPa, 13 MPa, 15 MPa, and 20 MPa based on characteristics test specified by ISO 22762:2010 and based on the test result, a regression analysis was made to offer an empirical formula. With application of proposed design formula which reflected the existing design formula and empirical formula, trend of horizontal characteristics was analyzed.