• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.5
• /
• pp.1-9
• /
• 1981

Experimental results on a 4-bit charge-coupled A/D converter are described. Major operations in the successive approximation algorithm are implemented in a monolithic chip, CCADC, which was fabricated usir p-channel CCD technology, with its die size of 4,200 mil2 Typical operating frequency range has been found out to be from 500Hz to 200kHz. In that frequency range, no missing code has been found in the whole signal range of 2.4 volts for ramp signal slewing at 1 LSB/(sampling time). A discussion is made on several layout techniques to conserve the nominal binary ratio of (8:4:2:1) among the areas of four adjacent potential wells (M wells), whose charge storing capacities correspond to each bit magnitude - 3.6 pC, 1.8 pC, 0.9 pC, and 0.45 pC nominal in the order of MSB to the LSB. The effect of 'dump slot', which is responsible for the excessive nonlinearity (2$\frac{1}{2}$LSB) in the A/D converter, is explained. A novel input scheme called 'slot zero insertion' to circumvent the deleterious effects of the dump slot is described with the experimental results.

• Earthquakes and Structures
• /
• v.13 no.3
• /
• pp.267-277
• /
• 2017

Base-isolation is now being adopted as a retrofitting strategy to improve seismic behaviour of reinforced concrete (r.c.) framed structures subjected to far-fault earthquakes. However, the increase in deformability of a base-isolated framed building may lead to amplification in the structural response under the long-duration horizontal pulses of high-magnitude near-fault earthquakes, which can become critical once the strength level of a fire-weakened r.c. superstructure is reduced. The aim of the present work is to investigate the nonlinear seismic response of fire-damaged r.c. framed structures retrofitted by base-isolation. For this purpose, a five-storey r.c. framed building primarily designed (as fixed-base) in compliance with a former Italian seismic code for a medium-risk zone, is to be retrofitted by the insertion of elastomeric bearings to meet the requirements of the current Italian code in a high-risk seismic zone. The nonlinear seismic response of the original (fixed-base) and retrofitted (base-isolated) test structures in a no fire situation are compared with those in the event of fire in the superstructure, where parametric temperature-time curves are defined at the first level, the first two and the upper levels. A lumped plasticity model describes the inelastic behaviour of the fire-damaged r.c. frame members, while a nonlinear force-displacement law is adopted for the elastomeric bearings. The average root-mean-square deviation of the observed spectrum from the target design spectrum together with a suitable intensity measure are chosen to select and scale near- and far-fault earthquakes on the basis of the design hypotheses adopted.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.1-8
• /
• 2007

Although the Java bytecode has numerous advantages. there ate also shortcomings such as slow execution speed and difficulty in analysis. Therefore. in order for the Java class file to be effectively executed under the execution environment such as the network, it is necessary to convert it into optimized code. We implements CTOC. CTOC generated CFG using the existing bytecode then created the SSA Form for analysis and optimization. However. due to insertion or the ${\phi}$-function in the process of conversion into the SSA Form, the number of nodes increased. As a means of reducing the number of nodes, we performed copy propagation, which is an optimization method applicable to the SSA form. Copy propagation is the process of a value of a variable being topied to another variable. There are cases where conversion due to copy propagation alone does not yield significant effects. However, when variables are not used in the later optimization stages, copy propagation provides a means for eliminating the copy statement for the corresponding variable, making it an important step. This paper shows the copy propagation to obtain a more optimized code in SSA Form.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.423-429
• /
• 2007

Since the wireless smart card has played a main role in the identification security application for the building access; this research has its purpose to improve the performance of the smart card system and aims to offer more convenient to user. The contactless cards do not require insertion into a card reader and can work up to centimeters away from the reading device. To be able to cope with this performance the controlling of power consumption through the adaptive modulation and error control is needed. This paper addresses a forward error control (FEC) scheme with the adaptive Reed-Solomon code rate and an M-ary frequency shift keying (M-FSK) modulation scheme with the varying symbol size M over the link. The result of comparing energy efficiencies of adaptive error correction and adaptive modulation to other various static schemes shows to save over 50% of the energy consumption.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.21-28
• /
• 2009

This paper proposes RCBT(Reduced Compact Binary trie) to correct faults of CBT (Compact Binary trie). First, in the case of CBT, a compact structure was tried for the first time, but as the amount of data was increasing, that of inputted data gained and much difficulty was experienced in insertion due to the dummy nodes used in balancing trees. On the other hand, if the HCBT realized hierarchically, given certain depth to prevent the map from increasing onthe right, reached the depth, the method for making new trees and connecting to them was used. Eventually, fast progress could be made in the inputting and searching speed, but this had a disadvantage of the storage space becoming bigger because of the use of dummy nods like CBT and of many tree links. In the case of RCBT in this thesis, a capacity is increased by about 60% by completely cutting down dummy nods.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.102-108
• /
• 2015

In general, two way satellite communication systems based on TDMA(Time Division Multiple Access) require network clock synchronization between hub station and remote terminals. This paper describes basic concepts for network clock synchronization based on NCR(Network Clock Reference) clock recovery scheme as suggested in DVB-S2/ RCS2 international standards. in addition, a new NCR insertion method has been proposed and evaluated in terms of supporting CCM mode as well as ACM mode which optimizes throughput by changing code rates and modulation types ranging from QPSK to 32-APSK.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1110-1119
• /
• 2020

The Floating Absorber for Safety at Transient (FAST) is a safety device used in the innovative Sodium-cooled Fast Reactor (iSFR). The FAST insert negative reactivity under transient or accident conditions. However, behavior of the FAST is still unclear under transient conditions. Therefore, the existing Floating Absorber for Safety at Transient Analysis Code (FASTAC) is improved to analyze the FAST movement by considering the reactivity and temperature distribution within the reactor core. The current FAST system is simulated under a single control rod withdrawal accident condition. In this investigation, the reactor thermal power does not return to its initial thermal power even if the FAST inserts negative reactivity. Only a 9 K of coolant temperature margin, in the hottest fuel assembly at EOL, can lead to unnecessary insertion of the negative reactivity. On the other hand, the FASTs cannot contribute to controlling the reactivity when normalized radial power is less than 0.889 at BOL and 0.972 at EOL. These simulation results suggest that the current FAST design needs to be optimized depending on its installed location. Meanwhile, the FAST system keeps the fuel, cladding and coolant temperatures below their limit temperatures with given conditions.

• Advances in Computational Design
• /
• v.5 no.4
• /
• pp.397-416
• /
• 2020

Functionally graded material (FGM) illustrates a novel class of composites that consists of a graded pattern of material composition. FGM is engineered to have a continuously varying spatial composition profile. Current work focused on buckling analysis of beam made of stepwise linear and quadratic graded material in axial direction subjected to axial span-load with piecewise function and rested on shear layer based on classical beam theory. The various boundary and natural conditions including simply supported (S-S), pinned - clamped (P-C), axial hinge - pinned (AH-P), axial hinge - clamped (AH-C), pinned - shear hinge (P-SHH), pinned - shear force released (P-SHR), axial hinge - shear force released (AH-SHR) and axial hinge - shear hinge (AH-SHH) are considered. To the best of the author's knowledge, buckling behavior of this kind of Euler-Bernoulli beams has not been studied yet. The equilibrium differential equation is derived by minimizing total potential energy via variational calculus and solved analytically. The boundary conditions, natural conditions and deformation continuity at concentrated load insertion point are expressed in matrix form and nontrivial solution is employed to calculate first buckling loads and corresponding mode shapes. By increasing truncation order, the relative error reduction and convergence of solution are observed. Fast convergence and good compatibility with various conditions are advantages of the proposed method. A MATLAB code is provided in appendix to employ the numerical procedure based on proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.13-18
• /
• 2004

In this paper, we proposed a new digital watermarking technique. It uses frequency domain of discrete wavelet transform(DWT). watermarking technique is one of the most important tools for DRM(Digital Right Management) We proposed a new algorithm watermark insertion and detection. This technique cleats the watermark sequence using the edge image, spread spectrum technique and DWT. We tested the technique with various attacks. and found that it satisfies the watermarking evaluation criteria. Cox similarity measurement value is more than 6 on the Lena image and PSNR is more than 40dB on JPEG, Collusion. Clopping and Scatting. By the result, we proved that the new technique satisfies the requirement of Digital contents distribution, which are undeletablility tenacity, statistical undetectablility.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1995.06b
• /
• pp.1-19
• /
• 1995

The plasmid pJEL 101 contains a highly repetitive element from the genome of Xanthomonas oryae pv. oryzae that has properties of an insertional element. The insertional nature of the element, hereto referred to as IS203, was confirmed by molecular analyses of the element and three related elements that were isolated from X. oryzae. The related sequences were isolated on the basis of transposition to the transposon-trapping vector pL3SAC and hybridization with pJEL101. The trapped elements (IS203a, IS203b, and IS203c) were each composed of 1,055 base pairs with 25 base terminal inverted repeats. The elements caused a three base pair target site duplication at the site of insertion in the sacRB gene. The sequence of pJEL 101 has 96% base pair identity with IS203a and 99% identity with IS203a and IS203c but lacks three nucleotides of the consensus left terminal repeat. IS203b has the same DNA sequences as IS203c but is inserted ito the sacRB gene in the opposite orientation. The longest open reading frame of IS203a could code for a protein of 318 amino acids and molecular weight of 37, 151. A search of the Genbank database revealed that IS203 has 51% identity with 909 nucleotides of IS4551 from Escherichia coli. The predicted protein of ORF1 has 40% and 30% amino acid identity to the ORF1 of Tn4551 and the transposase of IS30, respectively.