• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.472-475
• /
• 2003

In this paper, insulating varnish has been used for field magnet and armature impregnated insulating material of electric locomotive and traction motor. When it was duplicated coating, it could be accuse internal void, and which could change electrical characteristics. We used to boundary elemental method of simulation tool, and improved optimal insulating design of insulating varnish according to measuring electric distribution in void of specimen.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.211-211
• /
• 2009

높은 이온화율과 복잡한 형상의 모재에도 표면 도포성 및 균일성을 나타내는 아크이온플래이팅 기술과 비전도성 세라믹 타겟물질에 적용가능한 스퍼터링 기술이 결합된 하이브리드 코팅 시스템(Hybrid coating system)을 이용하였다. 그리고 Cr-Al-N과 Cr-Si-N 코팅막의 강화 기구를 복합시킨 새로운 개념의 Cr-Al-Si-N 코팅막을 초경(WC-Co)시험편에 증착하여 Si 첨가량에 따른 미세구조의 미세경도 특성을 파악하였다. 공구성능 평가는 고속가공조건하에 마이크로 밀링기에서 무코팅(초경공구), Cr-Al-Si-N (Si : 0, 4.5, 8.7, 16 at.%) 코팅 마이크로엔드밀에 대하여 공구마멸에 대한 공구수명을 비교, 평가하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.78-79
• /
• 2001

노광 후 지연(Post Exposure Delay： PED) 효과는 그림 1과 같이 노광 후 지연 시간에 따른 감광제의 Profile에 thinning, T-top, foot, undercut 를 보여주는 현상으로 화학 증폭형 감광제(Chemically Amplified Resist, CAR) 개발에 있어 PED의 안정성은 중요한 요소이다(1). 따라서 노광후 지연 효과에 대한 모델링은 연구와 개발을 위한 시뮬레이션 tool에 있어 매우 의미 있는 일이다. T-top 이나 undercut 를 형성하는 Surface inhibition layer(SIL) 은 노광 후 지연시 발생되는 environmental base contamination, acid evaporation 이 주요 원인이며 다른 원인으로는 감광제 속에서 acid migration, spin coating 동안에 photoacid generator (PAG)의 고갈, internal basic impurities 이며 그 외에 nonbsic atmospheric contamination, high power laser source의 영향 등이 있다. (중략)

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.27-30
• /
• 2003

The effect of fabrication method of catalytic layer on electrode performance has been investigated. Brush, spray gun and screen printer were used as fabrication tool and catalytic layers were formed by several methods in screen printing. Direct screen printing on polymer membrane, screen printing on carbon paper, and their combined method were applied. In the electrode fabricated by the screen printing method, Pt loading of Pt/C catalysts could be cut down to 50%, compared with results by the brushing and spraying methods. The best result of electrode was obtained as 0.6 V, at 1 A/$\textrm{cm}^2$ when catalytic layer was formed by the combined way.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.658-663
• /
• 2009

Metal/ceramic composites structures have many attractive properties with great potential for applications that demand high stiffness as well as chemical and biological stability, thermal and electrical insulation. They are currently in use for mechanical and thermal protection in cutting tool and engine parts. Thus, determination of adhesive properties for coating part is one of the most important problems for the extension of the use of coated materials. In this work, bending strength of Functionally Graded Materials(FGM) are evaluated by means of bending strength tester. The graded layer according to the load condition showed the change of the bend strength.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.77-82
• /
• 2019

In this study, we study the change of surface roughness during cutting machining by changing the cutting conditions such as feed rate and spindle velocity with chromium molybdenum steel (SCM415) material and TiCN and TiAlN coated end mill tools. The surface roughness value of the test specimen for SCM415, was found to be 3,000 rpm in TiCN coated end mill and $0.634{\mu}m$ in surface roughness at a feed rate of 100 mm/min. In the TiAlN coated end mill, 300 mm/min, the surface roughness was the best at $0.699{\mu}m$. The overall average surface roughness of each coating tool was better than that of TiAlN.

• Applied Microscopy
• /
• 제52권
• /
• pp.4.1-4.11
• /
• 2022

Field emission scanning electron microscopy (FESEM) is an essential tool for observing surface details of specimens in a high vacuum. A series of specimen procedures precludes the observations of living organisms, resulting in artifacts. To overcome these problems, Takahiko Hariyama and his colleagues proposed the concept of the "nanosuit" later referred to as "NanoSuit", describing a thin polymer layer placed on organisms to protect them in a high vacuum in 2013. The NanoSuit is formed rapidly by (i) electron beam irradiation, (ii) plasma irradiation, (iii) Tween 20 solution immersion, and (iv) surface shield enhancer (SSE) solution immersion. Without chemical fixation and metal coating, the NanoSuit-formed specimens allowed structural preservation and accurate element detection of insulating, wet specimens at high spatial resolution. NanoSuit-formed larvae were able to resume normal growth following FESEM observation. The method has been employed to observe unfixed and uncoated bacteria, multicellular organisms, and paraffin sections. These results suggest that the NanoSuit can be applied to prolong life in vacuo and overcome the limit of dead imaging of electron microscopy.

• 한국환경보건학회지
• /
• 제33권4호
• /
• pp.255-263
• /
• 2007

Indoor air quality is the dominant contributor to total personal exposure because most people spend a majority of their time indoors. The purposes of this study were to evaluate the alternative method for improvement of indoor air quality in house after coating titanium dioxide ($TiO_2$) photocatalyst for interior part of the house using nitrogen dioxide ($NO_2$) multiple measurements. To evaluate the alternative method in indoor environment, daily indoor and outdoor $NO_2$ concentrations of an apartment and a detached house were daily measured for consecutive 21 days in winter and summer, respectively, Another daily 21 measurements were carried out after $TiO_2$ coating on wall paper of interior part in houses. All $NO_2$ concentrations were measured by passive filter badges. Indoor air quality models using mass balance are useful tool to quantify the relationship between indoor air pollution levels, ambient concentrations, and explanatory variables. Using a mass balance model and linear regression analysis, penetration factor (ventilation rate divided by sum of ventilation rate and decay rate) and source strength factor (emission rate divided by sum of ventilation rate and decay rate) were calculated. Subsequently, the decay constants were estimated. In this study. magnitude of improvement of indoor air quality could be evaluated by decay constant.

• 동의생리병리학회지
• /
• 제30권5호
• /
• pp.320-326
• /
• 2016

Tongue diagnosis is convenient and non-invasive method to examine the body's functional condition, and it has been frequently used in traditional Korean Medicine (KM). The aim of this study was to investigate the difference of the tongue color assessed by computerized tongue image analysis system (CTIS) between the common cold (CC) patients and healthy subjects. A total of 85 participants, including 45 CC patients without organic diseases and 40 healthy subjects, were asked to complete the CC symptom questionnaire. A tongue image was acquired by using CTIS. Color differences in Commission Internationale de l'Eclairage (CIE) L*, a* and b* between the CC patient group and the control group were analyzes by using paired t-test analysis. The variable CIE b* of the tongue body was significantly lower in CC than that in controls (P=0.019). The variable CIE L* of the tongue coating was significantly higher in CC than that in controls (P=0.032). In CC, the color of the tongue body seems to be changed to intense red color. The color of the tongue coating seems to be changed to thick fur. The present study demonstrated that the CTIS can be used as a diagnostic and monitoring tool for the objective and standardized evaluation of common cold in clinics.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.89-94
• /
• 2019

K1A1 tank commander's primary thermal sight is a device that enables tank commanders to detect, identify, aim and track the target by observing targets in all directions during day, night and in situations of smokescreen and fog through $360^{\circ}$ rotation independent from the gunner's primary thermal sight and stabilizing the line of sight even under the vibrations occurring when the tank is standstill and moving. The main function of this device is to detect and process visible and thermal images and deliver the final images to the tank commander. One of the core parts to that end is the observation window (daytime/thermal image window). This core part is mounted at the entrance of the optical path for observing the target and plays the role of making visible light during the daytime and infrared light during the night pass through the target and transmitting the resultant images to the internal optical system of the tank commander's primary thermal sight. Such core parts have been selected as depot maintenance items so that they are replaced by new parts instead of being recycled when they are subjected to maintenance in most cases. That is, the military budget is wasted because such parts are replaced by new parts despite that they can be recycled for maintenance. Therefore, this study proposed a mounting tool for polishing and coating observation windows (daytime and thermal image window) using planar polishing equipment and DLC (Diamond-Like Carbon) coating equipment. In addition, this study presented an amendment (proposal) of the Depot Maintenance Work Request (DMWR) already published to verify the performance of recycled products including the establishment of inspection standards for recycling processes.