• 한방재활의학과학회지
• /
• 제23권3호
• /
• pp.149-157
• /
• 2013

Objectives This study was designed to: (1) investigate the clinical feature of tongue diagnosis, (2) make an observation of significant changes in tongue diagnosis according to the patient's physical condition and laboratory result and (3) identify clinical efficacy of tongue diagnosis. Methods 300 patients' tongue diagnosis results were analyzed and the patients were divided to each group according to the physical condition and laboratory result. Then, chi-square test was performed to assess statistical significance between tongue diagnosis results of each group. Results As a result of analyzing the spread of tongue diagnosis according to the patient's physical condition and laboratory result, 18 groups had statistical significance related to specific tongue color and tongue coating. Conclusions Even if there would be possible misinterpretations in one-to-one match between the tongue diagnosis and certain diseases, we identified that tongue diagnosis results were changed somewhat related to patient's physical condition with some tendency and tongue diagnosis could be used for meaningful clinical diagnostic tool.

• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.78-85
• /
• 2009

A combined theoretical and numerical study is conducted to design a slit nozzle for large-area liquid coating. The objectives are to guarantee the uniformity in the injected flow and to provide the capability of explicit control of flow rate. The woking fluid is a dilute aqueous solution containing single-walled carbon nanotubes and its low viscosity and the presence of dispersed materials pose technical hurdles. A theoretical analysis leads to a guideline for the geometric design of a slit nozzle. The CFD-based numerical experiment is employed as a verification tool. A new flow passage unit, connected to the nozzle chamber, is proposed to permit the control of flow rate by using the commodity pressurizer. The numerical results confirm the feasibility of this idea. The optimal geometry of internal structure of the nozzle has been searched for numerically and the related issues are discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1157-1162
• /
• 2003

Behavior of aluminum alloy embedding a particle was investigated at room temperature under ECAP. Finite element analysis by using ABAQUS shows that ECAP is a useful tool for eliminating residual porosity in the specimen, and much more effective under friction condition. The simulation, however, shows considerably low density distributions for matrix near a particle at which rich defects may occur during severe deformation. Finite element results of effective strains and deformed shapes for matrix with a particle were compared with theoretical calculations under simple shear stress. Also, based on the distribution of the maximum principal stress in the specimen, Weibull fracture probability was obtained for particle sizes and particle-coating layer materials. The probability was useful to predict the trend of more susceptible failure of a brittle coating layer than a particle without an interphase in metal matrix composites.

• 한국표면공학회지
• /
• 제39권6호
• /
• pp.263-267
• /
• 2006

As technology advances, there is a demand for development of hard solid lubricant coating. (Ti, Cr, Zr)N-$MoS_2$ films were deposited on AISI H13 tool steel substrate by co-deposition of $MoS_2$ with (Ti, Cr, Zr)N using a D.C. magnetron sputtering process. The influence of the $N_2Ar$ gas ratio, the amount of $MoS_2$ in the films and the bias voltage on the mechanical and structural properties of the films were investigated. The highest hardness level was observed at the $N_2/Ar$ gas ratio of 0.3. Hardness of the films did not change much with the increase of the $MoS_2$ content in the films. As the substrate bias potential was increased, hardness level of the film reached maximum at -150 V. Surface morphology of these films indicated that high hardness was attributed to the fine dome structure.

• Archives of Pharmacal Research
• /
• 제27권1호
• /
• pp.118-126
• /
• 2004

The aqueous extract of European mistletoe (Viscum album, L.) has been used in cancer therapy. The purified mistletoe lectins, main components of mistletoe, have demonstrated cytotoxic and immune-system-stimulating activities. Korean mistletoe (Viscum album L. coloratum), a subspecies of European mistletoe, has also been reported to possess anticancer and immunological activities. A galactose- and N-acetyl-D-galactosamine-specific lectin (Viscum album L. coloratum agglutinin, VCA) with Mr 60 kDa was isolated from Korean mistletoe. Mistletoe preparations have been given subcutaneously due to the low stability of lectin in the gastrointestinal (GI) tract. In the present study, we investigated the possibility of alginate/chitosan microcapsules as a tool for oral delivery of mistletoe lectin. In addition, our strategy has been to develop a system composed of stabilizing cores (granules), which contain mistletoe lectin, extract or powder, coated by a biodegradable polymer wall. Our results indicated that successful incorporation of VCA into alginate/chitosan microcapsules has been achieved and that the alginate/chitosan microcapsule protected the VCA from degradation at acidic pH values. And coating the VCA with polyacrylic polymers, Eudragit, produced outstanding results with ideal release profiles and only minimal losses of cytotoxicity after manufacturing step. The granules prepared with extract or whole plant produced the best results due to the stability in the extract or whole plant during manufacturing process.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.601-607
• /
• 2021

Laser cladding a surface treatment process that grants superior characteristics such as toughness, hardness, and corrosion resistance to the surface, and rebuilds cracked molds; as such, it can be a strong tool to prolong service life of mold steel. Furthermore, compared with the other similar coating processes - thermal spray, etc., laser cladding provides superior bonding strength and precision coating on a local area. In this study, surface characteristics are studied after laser cladding of low carbon steel using 18%Cr-2.5%Ni-Fe powder (Rockit404), known for its high hardness and excellent corrosion resistance. A diode laser with wavelength of 900-1070 nm is adopted as laser source under argon atmosphere; electrical power for the laser cladding process is 5, 6, and 10 kW. Fundamental surface characteristics such as crossectional microstructure and hardness profile are observed and measured, and special evaluation, such as a soldering test with molten ALDC12 alloy, is conducted to investigate the corrosion resistance characteristics. As a result of the die-soldering test by immersion of low carbon alloy steel in ALDC12 molten metal, the clad layer's soldering thickness decreases.

• Environmental Engineering Research
• /
• 제13권4호
• /
• pp.171-176
• /
• 2008

Studies on visible-light-driven photocatalysis of air pollutants at indoor air quality (IAQ) levels have been limited. Current study investigated visible-light derived photocatalysis with N-doped and S-doped titanium dioxide ($TiO_2$) for the control of benzene at indoor levels. Two preparation processes were employed for each of the two types of photocatalyst: urea-Degussa P-25 $TiO_2$ and titania-colloid methods for the N-doped $TiO_2$; and titanium isopropoxid- and tetraisopropoxide-thiourea methods for the S-doped $TiO_2$. Furthermore, two coating methods (EDTA- and acetylacetone-dissolving methods) were tested for both the N-doped and S-doped $TiO_2$. The two coating methods exhibited different photocatalytic degradation efficiency for the N-doped photocatalysts, whereas they did not exhibit any difference for the S-doped photocatalysts. In addition, the two doping processes showed different photocatalytic degradation efficiency for both the S-doped and N-doped photocatalysts. For both the N-doped and S-doped $TiO_2$, the photocatalytic oxidation (PCO) efficiency increased as the hydraulic diameter (HD) decreased. The degradation efficiency determined via a PCO system with visible-light induced $TiO_2$ was lower than that with UV-light induced unmodified $TiO_2$, which was obtained from previous studies. Nevertheless, it is noteworthy that for the photocatalytic annular reactor with the HD of 0.5 cm, PCO efficiency increased up to 52% for the N-doped $TiO_2$ and 60% for the S-doped $TiO_2$. Consequently, when combined with the advantage of visible light use over UV light use, it is suggested that with appropriate HD conditions, the visible-light-assisted photocatalytic systems can also become an important tool for improving IAQ.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.7-11
• /
• 2006

기계부품의 세라믹 코팅 층은 사용 중 그 표면특성이 변하므로 잔류수명 예측과 신뢰성 확보를 위해 비파괴적으로 세라믹 코팅 층의 특성을 평가하는 것은 매우 중요하다. 이를 위해 본 인구는 AISI 1045 강과 오스테나이트 스테인리스 304 강 모재위에 매우 얇은 TiN 세라믹 층을 코팅한 시편에 내하여 누설 레일리(Rayleigh) 표면파를 이용한 TiN 코팅부재의 특성평가를 시도하였다. 후방복사 측정기법으로 코팅 층 내의 표면파의 전파특성이 평가되었고 표면 거칠기, 코팅 층 두께, 마모조긴 둥이 다양한 시편들에 대해 후방복사 프로파일이 측정되었다. 후방복사 프로파일의 정점각과 크기는 시편의 조건들에 따라 민감하게 변하였고, 정점각의 증가는 코팅 층 접합 강도의 저하로 설명되었다. 결과들은 후방복사 기법을 이용한 표면파의 분산성 평가가 코팅 층의 특성 평가에 매우 유용함을 보여주었다.

• 한국표면공학회지
• /
• 제46권5호
• /
• pp.216-222
• /
• 2013

In order to improve the performance of electrodeposited diamond-nickel composite, surface modification of diamond particles was carried out using powder immersion reaction assisted coating (PIRAC). Titanium and chromium were selected as coating elements, which are known as carbide former. With respect to the powder elements, various phases were formed on diamond; metallic Ti and TiC for Ti powder, $Cr_3C_2$ for Cr powder, and TiC and $Cr_3C_2$ for Ti-Cr mixed powder. Surface modified diamond particle showed higher specific surface area, especially Ti coating induced considerable increase of specific surface area. The increase of specific surface area suggests increase of surface roughness, and that was confirmed by surface observation using FE-SEM. In addition, wear properties of diamond-nickel composite including surface modified diamonds were improved, and Ti coated diamond showed the highest performance. The wear property of diamond-nickel composite is dependent on adhesion strength between diamond particle and nickel layer. Therefore, surface modification of diamond particle by PIRAC increasing surface roughness is effective to improve the properties of diamond-nickel composite.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.371-376
• /
• 2011

The surface property of the materials used in tissue engineering application has been essential to regulate cellular behaviors by directing their adhesion on the materials. To modulate surface property of the synthetic biodegradable materials, a variety of surface modification techniques have used to introduced surface functional groups or bioactive molecules, recently polydopamine coating method have been introduce as a facile modification method which can be coated on various materials such as polymers, metals, and ceramics regardless of their surface property. However, there are no reports about the degree of polydopamine coating on the materials with different hydrophilicity. In the present study, we prepared acrylic acid grafted nanofibrous meshes using electron-beam irradiation, and then coated meshes with polydopamine. Polydopamine successfully coated on the all meshes, both properties of acrylic acid and polydopamine were detected on the meshes. In addition, the degree of polydopamine deposition on the materials has been altered according to surface hydrophilicity, which was approximately 8-times greater than those on the non-modified materials. In conclusion, dual effect from the acrylic acid grafting and polydopamine may give a chance as a alternative tool in tissue engineering application.