• 한국표면공학회지
• /
• 제36권5호
• /
• pp.398-405
• /
• 2003

The stainless steel wire requires good corrosion resistance and mechanical properties, such as drawing ability, combined with a high resistance to corrosion. For increasing drawing ability of stainless steel, Ni coating methods have been used in this study. However, there is no information on the electrochemical corrosion behavior of drawed wires after Ni coating. To investigate corrosion resistance and mechanical property of drawed wire, the characteristics of Ni coated wires have been determined by tensile strength tester, hardness tester, field emission scanning microscope, energy dispersive x-ray analysis and potentiodynamic method in 0.1 M HCl. The drawed stainless steel wires showed the strain-induced martensitic structure, whereas non-drawed stainless steel wire showed annealing twin in the matrix of austenitic structure. The hardness and tensile strength of drawed stainless steel wire were higer than that of non-drawed stainless steel wire. Electrochemical measurements showed that, in the case of drawed stainless steel o ire after Ni coating, the corrosion resistance and pitting potential increased compared with non-coated and drawed stainless steel wire due to decrease in the surface roughness.

• Corrosion Science and Technology
• /
• 제4권1호
• /
• pp.33-38
• /
• 2005

Some feasibility studies are conducted to produce an advanced ceramic coating, which reveals superior chemical and mechanical strength, on metal base structure used in chemical plant. This advanced coating on metallic frame can replace ceramic delivery pipe and reaction chamber used in chemical plant, which are operated in hi-temperature and corrosive/erosive environment. An dual spraying is adopted to reduce the residual stress in order to increase the coating thickness and the residual stress is estimated by in-situ manner. Then new methodology is tried to form special coating of yttrium aluminum garnet(YAG), which reveals hi-strength and low-creep rates at hi-temperature, superior anti-corrosion property, hi-stability against Alkali-Vapor corrosion, and so on, on iron base structure. To verify the formation of YAG during thermal spraying, XRD(X ray diffraction) technique was used.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.303-304
• /
• 2007

A comparison study of carbon coating on $LiFePO_4$ was done with two different carbon sources-petroleum pitch and Ketjen black. Raman spectroscopy and transmission electron microscopy (TEM) analysis were applied to the carbon-coated $LiFePO_4$. $LiFePO_4$ which was carbon-coated with petroleum pitch showed more uniform carbon layer and ordered carbon structure. Such uniformity and ordered structure of carbon coating layer resulted in higher initial discharge capacity and better rate capability.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.47-53
• /
• 2004

In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.32-38
• /
• 2000

This study was carried out to determine the effect of the type of plastic pigment on the coat-ing structure and printability of coated paper. Three kinds of plastic pigments(solid-bead type binder type and hollow type) were used for hti purpose. IN this research it was observed that particle shape and structure of plastic pigment had influenced the rheology of coating color the state of packing and the properties of coated paper. Inorganic pigments used in this research were platelike kaolin clay and rhombic calcium carbonate. Three kinds of plastic pigments were blended with two inorganic pigments respec-tively. The combination of pigments were carried out(1) to determined the effect of particle structure of plastic pigment on the state of dispersion of coating color(2) to observe the effect of calendering temperature on the property of coated paper prepared with different plastic pigments. The data indicated that binder and hollow type plastic pigment gave the best results in improving the properties of coated paper such as paper gloss opacity and air pet-meability.

• 한국표면공학회지
• /
• 제31권6호
• /
• pp.317-324
• /
• 1998

TiN and TiCN films were deposited on the high speed steel by Cathode Arc Ion Plating(CAIP) Process to investigate the tool life extension effect. The experiment variables were bias voltage and deposit time for the TiN coating and reactive gas flow rate ($CH_4:N_2$) under fixing deposit pressure, are current, bias voltage for the TiCN coating respectively. The micro structure and mechanical properties were investigated and compared for among the coating conditions using various methods and machining practice.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2279-2282
• /
• 2007

Highly crystalline, uniform Fe nanoparticles were successfully synthesized and encapsulated in zirconia shell using sol-gel process. Two different approaches have been employed for the coating of Fe nanoparticle with zirconia. The thickness of zirconia shell can be readily controlled by altering molar ratio of Fe nanoparticle core to zirconia precursor in the first case where as reaction time was found to be most effective parameter to controlled the shell thickness in the second method. The structure and magnetic properties of the ZrO2-coated Fe nanoparticles were studied. TEM and HRTEM images show a typical core/shell structure in which spherical α-iron crystal sized of ~25 nm is surrounded by amorphous ZrO2 coating layer. TGA study showed an evidence of weight loss of less than 2% over the temperature range of 50-500 °C. The nanoparticles are basically in ferromagnetic state and their magnetic properties depend strongly on annealing temperature. The thermal treatment carried out in as-prepared sample resulted in reduction of coercivity and an increase in saturation magnetization. X-ray diffraction experiments on the samples after annealing at 400-600 °C indicate that the size of the Fe@ZrO2 particles is increased slightly with increasing annealing temperature, indicating the ZrO2 coating layer is effective to interrupt growing of iron particle according to heat treatment.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.1037-1044
• /
• 2007

Metallic paint is one of the most widely used coating in automotive, cosmetic and other applications because of its well-known ability to give a product realistic look which creates widespread consumer appeal. But, this coating has complicated subsurface structure which includes pigments, flakes, and transparent clearcoat. Though various analytic reflection models are available to simulate appearance of various surfaces, it is difficult to select an appropriate reflection model with faithful parameters for simulating this coating due to the complex subsurface structure of metallic paints. This paper presents a framework for accurate modeling of metallic coating by determining an appropriate reflection model among various existing BRDF (Bidirectional Reflectance Distribution Function) models. The selection of the appropriate model is achieved by measuring BRDF of various metallic paint samples using a BRDF measuring device i.e. gonioreflectometer and fitting an existing model to the measured data. Then, this model is effectively realized by rendering metallic painted surfaces. We believe that this framework can serve as a guide for those who wants to render metallic painted surfaces accurately with analytic BRDF model without expending time on extracting BRDF data using gonioreflectometer from real metallic paint sample.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.233-238
• /
• 2010

Hot-dipped Al-Mg-Si coatings to alternate Zn and Zn alloy coatings for steel were examined on metallographic structure, corrosion resistance, sacrificial ability, formation and growth of inter-metallic compounds, and mechanical properties. Near the eutectic composition of quasi-binary system of Al-$Mg_2Si$, very fine eutectic structure of ${\alpha}$-Al and $Mg_2Si$ was obtained and it showed excellent corrosion resistivity and sacrificial ability for a steel in sodium chloride solutions. Formation and growth of Al-Fe inter-metallic compounds at the interface of substrate steel and coated layer was suppressed by addition of Si. The inter-metallic compounds layer was usually brittle, however, the coating layer did not peel off as long as the thickness of the inter-metallic compounds layer was small enough. During sacrificial protection of a steel, amount of hydrogen into the steel was more than ten times smaller than that of Zn coated steel, suggesting to prevent hydrogen embrittlement. Al-Mg-Si coating is expected to apply for several kinds of high strength steels.

• 한국공간구조학회논문집
• /
• 제11권1호
• /
• pp.97-104
• /
• 2011

본 연구에서는 막구조 건축물의 유지관리를 위한 막재의 표면 및 코팅층의 열화진단을 수행하였다. 막재는 내화학성능 및 내부식 성능을 포함하는 내구성능이 가장 중요시 되는 재료이다. 일반적으로 대공간 건축물의 지붕재료로 사용되는 막재의 유지관리 진단항목은 막재의 표면 열화진단, 막재의 코팅층 열화진단, 막재의 코팅층 및 섬유포 사이의 열화진단, 막재 전면에 걸친 열화진단, 로프의 열화진단, 보강벨트의 열화진단, 커버고무 등의 열화진단 등으로 대별된다. 본 연구는 대공간 건축물의 지붕재료로 많이 사용되는 PVDF계 막재를 대상으로 표면 및 코팅층의 열화도 진단 결과를 보고한다.