Browse > Article

Effects of Ni Coating on the Surface Characteristics of Drawed Stainless Steel Wire  

최한철 (조선대학교 치과대학 치과재료학교실 및 생체재료나노계면활성화센터)
Publication Information
Journal of the Korean institute of surface engineering / v.36, no.5, 2003 , pp. 398-405 More about this Journal
Abstract
The stainless steel wire requires good corrosion resistance and mechanical properties, such as drawing ability, combined with a high resistance to corrosion. For increasing drawing ability of stainless steel, Ni coating methods have been used in this study. However, there is no information on the electrochemical corrosion behavior of drawed wires after Ni coating. To investigate corrosion resistance and mechanical property of drawed wire, the characteristics of Ni coated wires have been determined by tensile strength tester, hardness tester, field emission scanning microscope, energy dispersive x-ray analysis and potentiodynamic method in 0.1 M HCl. The drawed stainless steel wires showed the strain-induced martensitic structure, whereas non-drawed stainless steel wire showed annealing twin in the matrix of austenitic structure. The hardness and tensile strength of drawed stainless steel wire were higer than that of non-drawed stainless steel wire. Electrochemical measurements showed that, in the case of drawed stainless steel o ire after Ni coating, the corrosion resistance and pitting potential increased compared with non-coated and drawed stainless steel wire due to decrease in the surface roughness.
Keywords
Stainless steel wire; Corrosion resistance; Ni cooling; Mechanical properly;
Citations & Related Records
연도 인용수 순위
  • Reference
1 P. Marcus and J. Oudar, 'Corrosion Mechanismsin Theory and Practice', Marcel Deckker, Inc. New York, (1995) 325
2 F. Mancia and A. Tamba, Corros., 44 (1988) 88   DOI   ScienceOn
3 M. I. Suleiman, I. Ragault and R. C. Newman,Corros. Sci, 36 (1993) 479   DOI
4 Y. M. Ko, W. N. Mo, H. C. Choe, The J. Kor. Res. Soc. for Dental Mater., 30 (2003) 37
5 J. H. Zheng and W. F. Bogaerts, Corros., 49 (1993) 42   DOI
6 S. O. Cha, H. C. Choe and K. H. Kim, J. Kor. Inst. Met. & Mater., 36 (1998) 138
7 Z. Szklarska-Smialowska, 'Pitting Corrosion of Metats', NACE, Houston, (1996) 90
8 E. C. Bain, R. H. Aborn and J. J. B. Rutherfold, Trans. Amer. Soc. Steel Treat., 21 (1933) 481
9 R. Qvarfort, Corros. Sci., 29 (1989) 387
10 D. P. Schweinsberg, B. Sun, and V. Otieno-Alego, J. Appl. Electrochem., 24 (1994) 803   DOI   ScienceOn
11 M. Pourbaix, Corros., 26 (1970) 431   DOI