• Journal of Information Display
• /
• 제4권2호
• /
• pp.1-6
• /
• 2003

In this paper, we demonstrate that the organic electrophosphorescent device is driven by the organic thin film transistor with spin-coated photoacryl gate insulator. It was found that electrical output characteristics in our organic thin film transistors using the staggered-inverted top-contact structure showed the non-saturated slope in the saturation region and the sub-threshold nonlinearity in the triode region, where we obtained the maximum power luminance that was about 90 $cd/m^2$. Field effect mobility, threshold voltage, and on-off current ratio in 0.45 ${\mu}m$ thick gate dielectric layer were 0.17 $cm^2/Vs$, -7 V, and $10^6$ , respectively. In order to form polyimide as a gate insulator, vapor deposition polymerization process was also introduced instead of spin-coating process, where polyimide film was co-deposited by high-vacuum thermal evaporation from 4,4'-oxydiphthalic anhydride (ODPA) and 4,4'-oxydianiline (ODA) and cured at 150${\sqsubset}$for 1hr. It was also found that field effect mobility, threshold voltage, on-off current ratio, and sub-threshold slope with 0.45 ${\mu}m$ thick gate dielectric films were 0.134 $cm^2/Vs$, -7 V, and $10^6$ A/A, and 1 V/decade, respectively.

• 한국전자파학회논문지
• /
• 제28권11호
• /
• pp.865-871
• /
• 2017

본 논문에서는 기존의 플루오린화 수소산(hydrofluoric acid)을 이용한 꼬인 형태의 광섬유형 결합기 표면에 젤라틴 수용액을 코팅한 뒤 흡수체로 활용하여 상대 습도 측정에 이용하였다. 제안한 광섬유형 습도 측정 센서는 기존 전자 소자를 이용한 감지 방식과 비교하면 값이 매우 저렴하며 광섬유 및 빛이 갖는 다양한 장점들을 취하고 있다. 본 논문에서 제시한 광섬유형 습도 센서는 상대습도 기준 약 40 %에서부터 85 %까지 측정한 결과를 보여주었으며, 계산 결과와도 그 경향이 잘 일치하는 것을 알 수 있다. 본 논문에서 제시한 광섬유형 결합기 센서 구조는 향후 센서 분야에서 습도 및 다양한 위험 기체를 감지할 수 있는 역할로 유망한 역할을 맡을 수 있을 것으로 기대된다.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.781-786
• /
• 2000

An Er-doped sulfide fiber was drawn, and its spectroscopic properties were analyzed. Compositions of a 1000 ppmwt Er3+-doped core and an undoped clad were Ge30-Ga1-Asg-S61 and Ge30-As8-S62, in at.%, respectively. Refractive index of the core composition was approximately 0.01 high than that of the clad. In order to enhance the mechanical stability as well as to prevent infiltration of impurity ions such as OH-, an UV-curable polymer was used for the coating. The optical loss of a fiber formed directly from a polymer coated core rod without cladding was ∼15 dB/m at 1.06$\mu\textrm{m}$. In the case of a fiber with core/clad structure, the optical loss was so high that the stimulated emission of erbium fluorescence was not evident. It is believed that presence of inhomogeneous core/clad interface and crystalline aggregates precipitated in the clad region were responsible for the high optical loss. On the other hand, fluorescence characteristics of Er3+ embedded in the core region were more or loss deteriorate compared to fiber preform, which is attributed to the redistribution of the Er ions along with the partial crystallization of the core glass during the fiberization process.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.379-400
• /
• 1992

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from the mandibular distal extension removable partial dentures with the mesial or distal placement of the occlusal rest and the mesial or distal connection in the back-action clasp with the five various designs of the back-action clasp, that is, the mesial connection and the distal rest, the distal connection and mesial rest, the mesial connection and mesial rest, the distal connection and the mesial and distal rest, and the mesial connection, and the mesial and distal rest. A photoelastic model was made of the epoxy resin(PC-1) and the hardner(PLH-1) with the acrylic resin teeth used and was coated with the plastic cement-1 at the lingual surface of the model and then five kinds of the removable partial dentures on the photoelastic model were set. A unilateral vertical load of 12.5 kg was applied on the central fossa of the first molar with the use of specially designed loading device and the pattern and distribution of the stress of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained. 1. In the back-action clasp with the mesial connection and mesial rest of the case 3, the effect of the stress distribution was the most favorable. 2. In the back-action clasp with the mesial and distal rest, of the case 4 and 5, the stress distribution was more greatly showed in the terminal abutment. 3. Generally, the stress distribution was more favarable in the mesial connection than in the distal connection. 4. In the back-action clasp with the mesial connection of the case 1, 3 and 5, the stress distribution was the most favorable in the mesial rest.

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.63-68
• /
• 1999

가스 감지막의 미세구조와 비화학량론 구조의 변화에 따른 응답특성의 거동을 고찰하기 위하여 소성 조건을 변화시키면서 $WO_3$후막형 가스센서를 제조하였다. 소자는 감지물질인 $WO_3$분말과 유기 용제를 균일하게 혼합한 페이스트를 Au전극과 $RuO_2$발열체가 입혀진 알루미나 기판 위에 스크린 프린팅 방법으로 제조하였다. 소성 조건을 변화시키기 위하여 600-$800^{\circ}C$ 온도범위하에서 1시간 동안 열처리 하였고, Ar과 $O_2$가스의 비율을 변화시키면서 $700^{\circ}C$에서 1시간 재열처리하였다. 열처리 결과, 소성 온도 $700^{\circ}C$에서 제조된 $WO_3$가스센서 소자가 가스감도 210, 응답속도 2초로 가장 좋은 특성을 보였으며 Ar과 $O_2$가스의 비율이 40-50%의 소성 분위기에서 가스 감도가 가장 높게 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1574-1576
• /
• 2003

Carbon nanotubes (CNTs) were grown on the TiN-coated silicon substrate with different thickness of Ni and Co catalysts layer at $600^{\circ}C$ using inductively coupled plasma-chemical vapor deposition (ICP-CVD). The Ni and Co catalysts were formed using the RF magnetron sputtering system with various deposition times. It was found that the growth of CNTs was strongly influenced by the surface morphology of Ni and Co catalysts. With increasing deposition time, the thickness of catalysts increased and the grain boundary size of catalysts increased. The surface morphology of catalysts and CNTs were elucidated by SEM. The Raman spectrum further confirmed the graphitic structure of the CNTs. The turn-on field of CNTs grown on Ni and Co catalysts was about 2.7V/pm and 1.9V/pm respectively. Field emission current density of CNTs grown on Ni and Co catalysts was measured as $11.67mA/cm^2$ at $5.5V/{\mu}m$ and $1.5mA/cm^2$ at $5.5V/{\mu}m$ respectively.

• Journal of Pharmaceutical Investigation
• /
• 제38권2호
• /
• pp.105-110
• /
• 2008

Indapamide (4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoyl-benz-amide) is an oral antihypertensive diuretic agent indicated for the treatment of hypertensive. The diuretic and natriuretic effects are mainly due to the structure of o-chlorobenzenesulfonamide. The objective of this study was to formulate sustained release indapamide granules and assess their formulation variables. Granules were prepared by fluid bed coating method and consist of drug layer and membrane layer. The granules were coated with HPC and ethyl cellulose along with plasticizer dibuthyl sebacate. The release of indapamide depended on the type of Eudragit such as RS and NE 30 D used in the formulation controlled release layer. These results obtained clearly suggest that the sustained release oral delivery system for indapamide could be designed with satisfying drug release profile approved.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.255-259
• /
• 2014

In this research, we compared the COD removal efficiencies of titanium dioxide ($TiO_2$) thin films coated on the surfaces of borosilicate glass that prepared by three different numbers of coating layer; i) 3 layers ii) 4 layers and iii) 5 layers by sol-gel method. All of the prepared $TiO_2$ thin films consisted of pure anatase crystalline structure with grain sizes in the range 20-250 nm. The calculated optical band gaps of the $TiO_2$ thin films were 3.24. The total apparent surface area per total weight of $TiO_2$ thin films were 4.74, 3.86 and $2.79m^2g^{-1}$ for 3, 4 and 5 layers coating, respectively. The kinetics of the photodegradation reactions of COD under UVA light source were described by the Langmuir-Hinshelwood (L-H) kinetic model. The specific rates of the photodegradation of $TiO_2$ thin films at 3 layers coating was $1.40{\times}10^{-4}min^{-1}mW^{-1}$, while for the 4 layers coating and the 5 layers coating were $1.50{\times}10^{-4}$ and $4.60{\times}10^{-4}min^{-1}mW^{-1}$, respectively. The photocatalytic performance of COD degradation was higher with smaller grain size, higher surface area and narrow optical band gaps. Moreover, the numbers of coating layer on substrate also have great influence for kinetic of COD removal.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.172-180
• /
• 2013

Aramid fibers are being used increasingly in a wide range of application due to low density, high specific strength, high modulus, and high thermal resistance. But owing to its special physical and chemical structures, it is sensitive to absorb the ultraviolet light which will degrade the fiber's useful mechanical properties and structure. In this paper, the sol-gel technique was used to improve the photo-stability of p-aramid fibers. $TiO_2$, modified $SiO_2$/$TiO_2$ sol were used as coating solutions. The influence of the such coatings on the photo-stability of p-aramid fiber was investigated by an accelerated photo-ageing method using xenon lamp. The photo-stability of p-aramid fiber showed obvious improvement after the modified silica binding coating. But the amorphous $TiO_2$ sol coatings showed a negative effect. After 144h light exposure, the modified silane binder-coated fibers showed less degradation in mechanical properties with the retained tensile strength greater than about 70% of the original value.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.202-210
• /
• 2016

This study was intended to investigate the effect of the amount of magnesium addition and heat treatment in the Al-Mg coating film in order to improve corrosion resistance of aluminum coating. Al-Mg alloy films were deposited on cold rolled steel by physical vapor deposition sputtering method. Heat treatment was fulfilled in an nitrogen atmosphere at the temperature of $400^{\circ}C$ for 10 min. The morphology was observed by SEM, component and phase of the deposited films were investigated by using GDLS and XRD, respectively. The corrosion behaviors of Al-Mg films were estimated by exposing salt spray test at 5 wt.% NaCl solution and measuring polarization curves in deaerated 3 wt.% NaCl solution. With the increase of magnesium content, the morphology of the deposited Al-Mg films changed from columnar to featureless structure and particle size was became fine. The x-ray diffraction data for deposited Al-Mg films showed only pure Al peaks. However, Al-Mg alloy peaks such as $Al_3Mg_2$ and $Al_{12}Mg_{17}$ were formed after heat treatment. All the sputtered Al-Mg films obviously showed good corrosion resistance compared with aluminum and zinc films. And corrosion resistance of Al-Mg film was increased after heat treatment.