• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.268-268
• /
• 2017

Common sowing method of italian ryegrass (IRG) has been using the backpack seed sprayer (BSS) in Korea. It has weak point including a hard work and a little sowing area. This study was conducted to find out the effects of sowing IRG using unmanned helicopter (UH) under the established rice field. We checked the labour saving of sowing IRG and the growth and yield of rice after using IRG as forage crop. Two sowing implements(using by UH and backpack seed sprayer (BSS)) were tested for the ability of sowing IRG. For proper pretreatment of IRG seeds for aerial sowing using with UH, we tested one-day soaking seeds, iron-coated seeds, coated seeds sold in stores and untreated seeds. Aerial sowing of IRG seeds using UH was tested under the speed 10 km/h and flying altitude 3~4m. We tried to confirm the effects on rice growth in a paddy field after IRG had been used as forage in mid May. In 6 hours of seeding per day, UH had a seeding area of 21.8 hectares, three times wider than BSS. UH had a decrease of about 63 percent of sowing-seed cost in comparison with BSS. In the IRG aerial sowing using UH, coating seeds had the wider sowing width of 5~6 meter than 3~4 meter untreated seeds. Residual dry matter of IRG after using forage had 4.5 ton per hectare and 20 percent of top dry matter. The amount of nitrogen remaining in residual IRG in the soil was 12 kg per hectare, and the other nutrients such as calcium and potassium was incorporated into the soil with less than 10 kg/ha. The rice yield after the harvesting IRG was 5 percent higher than that of rice single cropping. Consequently, IRG sowing using UH was effective in reducing sowing time and sowing cost compared with conventional methods and, it is considered that there is a positive effect on the rice cultivation compared to rice single cropping.

• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.174-179
• /
• 2021

Recently, hybrid coal research is underway to upgrade low-grade coal. The hybrid coal is made by mixing low-grade coal with bioliquids such as molasses, sugar cane, and lignin. In the case of lignin used here, a large amount of lignin is included in the wastewater of the papermaking process, and thus, research on hybrid coal production using the same is attracting attention. However, since a large amount of metal ions are contained in the lignin wastewater from the papermaking process, substances that corrode the generator are generated during combustion, and the amount of fly ash is increased. To solve this problem, it is essential to remove metal ions in the lignin wastewater. In this study, metal ions were removed by ion exchange with a alumina hollow fiber membrane coated with K-Phillipsite (K-PHI) zeolite. The alumina hollow fiber membrane used as the support was prepared by the nonsolvent induced phase separation (NIPS) method, and K-PHI seeds were prepared by hydrothermal synthesis. The prepared K-PHI seed was seeded on the surface of the support and coated by secondary growth hydrothermal synthesis. The characteristic of prepared coating membrane was analyzed by Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDX), and the concentration of metal ions before and after ion exchange was measured by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). The extraction amount of K+ is 86 mg/kg, and the extraction amount of Na+ is 54.9 mg/kg. Therefore, K-PHI zeolite membrane has the potential to remove potassium and sodium ions from the solution and can be used in acidic lignin wastewater.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.339-339
• /
• 2002

In the RABiTS approach to coated conductor development, successful (both economic and technological) depends on the refinement and optimization of each of three important components: the metal tape substrate, the buffer layer(s), and the HTS layer. Here we will report on the ORNL approach and progress in each of these areas. - Most applications will require metal tapes with low magnetic hysteresis, mechanical strength, and excellent crystalline texture. Some of these requirements are competing. We report on progress in obtaining a good combination of these characteristics on metal alloys of Ni-Cr and Ni-W. - The deposition of appropriate buffer layers is a crucial step. Recently, base research has shown that the presence of a stable sulfur superstructure present on the metal surface is needed for the nucleation and epitaxial growth of vapor-deposited seed buffer layers such as YSZ, CeO$_2$ and SrTiO$_3$. We report on the details and control of this superstructure for nickel tapes, as well as recent results for Cu and Ni-13%Cr. - Processes for deposition of the HTS coating must economically provide large values of the figure-of-merit for conductors, current x length. At ORNL, we have devoted efforts to a precursor/post-annealing approach to YBCO coatings, for which the deposition and reaction steps are separate. We describe motivation for and progress toward developing this approach. - Finally, we address some issues for the implementation of coated conductors in real applications, including the need for texture control and electrical stabilization of the HTS coating.

• 한국초지조사료학회지
• /
• 제27권4호
• /
• pp.281-286
• /
• 2007

초지조성과 개량에서 겉뿌림은 중요한 방법 중의 하나이다. 오늘날 겉뿌림 초지조성에서 종자피복기술은 관심이 높아지고 있다. 따라서 본 시험은 산지초지에서 겉뿌림조성시 목초의 출현율과 정착율을 높이기 위해 화본과목초종자의 피복기술을 개발하기 위하여 실시하였다. 종자 펠렛팅은 피복시간을 단축하고 단위시간당 피복량을 증가시킴으로서 종자피복의 새로운 기술로 평가되었다. 펠렛종자의 건조시간을 단축하고 건조온도를 낮춤으로서 화본과 목초종자의 발아세와 발아율이 증가하였다. 임간초지에서 펠렛종자는 종자의 출현, 정착 및 초기생육을 향상시켰다. 이상의 시험결과를 볼 때 임간초지에서 종자 펠렛팅 기술은 화본과목초의 정착과 초기생육 향상을 위한 새로운 기술로 평가되었다.

• 한국작물학회지
• /
• 제61권1호
• /
• pp.9-16
• /
• 2016

벼 직파재배에서 볍씨에 피복재인 지오라이트와 결합재인 수용성규산(25%)으로 혼합 코팅된 "규산코팅볍씨(SCS)"의 활용에 의한 키다리병 억제효과를 구명하고자 서해안 간척지유래토양에서 담수표면직파된 포장시험과 아울러 시험포장에서 발병된 키다리병 이병주를 접종원으로 하여 변온조건(주야 $18{\sim}26^{\circ}C$)과 항온조건($30^{\circ}C$)에서 실내시험으로 수행한 결과는 다음과 같다. 1. 담수직파에서 규산코팅볍씨 처리구는 무코팅볍씨 처리구에서 보다 입모분포상태가 균일하였고 분얼중기경 건물생산량이 13% 증가되었다. 2. 무코팅볍씨 처리구에서는 분얼중기 경부터 키다리병이 발생되어 종자감염을 일으키는 출수기 경에 9.9%의 심한 이병경율을 보인 반면에 규산코팅볍씨 처리구에서는 분얼중기까지 거의 발생이 없다가 출수기 무렵에 0.01%의 극미한 발생으로 99.9%의 방제가를 보였다. 이병주의 줄기마디와 이삭영화 감염부위에서는 전형적인 키다리병균의 소형분생자와 대형분생자 및 균사체 등이 확인되었다. 3. 무코팅볍씨와 규산코팅볍씨를 $30^{\circ}C$ 항온기에 각각 치상하고 시험포장에서 발병된 이병주의 이삭을 2주일간 접종 처리한 결과 무코팅볍씨 처리구의 접종이삭 종자에서는 종자표면에 균총이 형성되었고 종자내에는 소형분생자, 대형분생자 및 균사 발육이 왕성하게 증식된 반면에 규산코팅볍씨 처리구에서는 소형분생자와 균사는 생존하지 못하였고 대형분생자와 균사체 발육은 크게 위축되었다. 이상의 결과로 규산코팅볍씨의 활용으로 직파재배 시 종자소독 없이도 친환경적 키다리병 방제가 가능하며, 향후 종자소독제로의 개발도 가능할 것으로 판단되었다.

• 한국작물학회지
• /
• 제41권6호
• /
• pp.678-684
• /
• 1996

기계화 파종으로 파종작업의 생력화를 위하여 배추종자 및 볍씨 pelleting에 대해서 Pelleting 물질과 접착제에 대한 기초적인 시험을 실시하였다. 그 중 pellting 재료와 접착제에 따른 pellet의 모양형성, 경도, 발아에 대하여 조사한 결과 다음과 같은 결과를 얻었다. 1. Pellet 종자의 모양형성은 접착제를 pelgel, AG-11을 사용하고 재료로는 paper clay, lime, PLL-11, coal ash등을 사용할 때 가장 우수하였다. 2. Pellet 종자의 경도는 pelleting 물질에 따라, 또는 접착제의 종류에 따라 공히 영향이 켰다 3. 모양형성과 경도를 함께 고려할 때 가장 우수한 pelleting 재료는 PLL-11 및 paper clay이었고, 접착제로는 pelgel과 AG-11이 었다. 4. Pelgel을 접착제로 하고 여러 가지 재료를 이용한 pellet 종자의 발아는 대체적으로 다양한 발아저해 현상을 보였으나 PLL-11을 재료로하고 여러 가지 접착제로 pelleting한 종자에서는 발아에 지장이 없었다. 그 중 PLL-11을 재료로 한 pellet 종자에서 가장 발아을이 우수하였고 zeolite를 재료로 한 종자에서 발아억제 현상이 가장 심했다. 5. AG-11과 PLL-11을 재료로 한 볍씨 Pelleting 종자의 발아는 무처리와 같았다 6. PLL-11을 재료로 하고 여러 가지 접착제를 이용한 pellet종자에서는 발아저해가 피의 나타나지 않았다. 7. Pellet 물질의 추출물을 이용한 발아에서 zeo-lite와 bentonite추출물에서 약간의 발아저해현상이 나타났다. 8. Pellet 물질의 추출물 산도는 zeolite와 ben-tonite에서 가장 높았고, 전기전도도도 역시 zeolite와 bentonite에서 가장 높았다.

• 한국세라믹학회지
• /
• 제42권7호
• /
• pp.521-524
• /
• 2005

ZnO 2-D nanowall structure with around 100 nm thickness, which is composed of tens of nm scale ZnO single crystals, was fabricated through the low temperature chemical solution growth method. Electro Chemical Deposition (ECD) technique was applied to attach the ZnO seed crystals on ITO coated glass substrate. The ZnO nanowall structure was grown in the 0.015 mol$\%$ of aqueous solution of zinc nitrate and hexamethenamine at 60$^{\circ}C$ for 20 - 40 h. The nanowall structure depends on the ECD condition or the applied voltage and duration time. The nanowall shows a photoluminescence around 550 - 700 nm spectrum range.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.481-485
• /
• 2012

ZnO nanowires were synthesized by hydrothermal technique. Prepared synthesis aqueous solutions were preserved by preheating in autoclave type synthesis equipment with various preheating time of 1 h difference. ITO-coated corning glass substrates deposited with AZO seed layers were then inserted in the preheated synthesis aqueous solutions and ZnO nanowires were grown for 180 min at $90^{\circ}C$. Density, length and aspect ratio of the grown ZnO nanowires were investigated. Composition, structural and optical properties of the grown ZnO nanowires were analyzed. Characteristics of the ZnO nanowires were comparatively studied in relation with $Zn^{2+}$ ion concentration measured directly after the preheating of synthesis aqueous solution.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.24-29
• /
• 2017

This paper provides an experimental analysis on the breakage of the coated tool using the face-milling cutter of the machining center due to changes in the cutting speed and the feed rate. The experimental studies were conducted using STS 304 materials and the damage to the tool was analyzed according to the change in machining time. The experiments confirmed that the cutting speed and feed rate affected the tool damage and the mechanical impact and thermal shock were determined to severely damage the tool. From the production engineering point of view, it has been experimentally investigated that the increased feed rate significantly influences the material removal rate more than the increased cutting speed.

• 한국진공학회지
• /
• 제19권3호
• /
• pp.236-241
• /
• 2010

수열합성법을 이용하여 전구체 용액 농도에 따라 성장된 ZnO 나노막대의 특성에 대한 연구를 수행하였다. ZnO 씨앗층은 sol-gel법으로 코팅하였고, 그 위에 ZnO 나노막대는 전구체 용액 농도를 0.01 M에서 0.3 M로 변화하여 성장시켰다. FE-SEM (field-emission scanning electron microscopy), XRD (X-ray diffraction), PL (photoluminescence)을 사용하여 ZnO 나노막대의 특성 변화를 분석하였다. 전구체 용액의 농도가 증가함에 따라 ZnO 나노막대의 직경과 길이가 증가하였으며 광학적 특성이 향상되었다.