• The Plant Pathology Journal
• /
• v.24 no.1
• /
• pp.58-62
• /
• 2008

Utilization of carbon sources by Bacillus cereus D324, a biological control agent, and Pythium species, which causes rice seedling disease, was studied with the objective of increasing the efficacy of biological control by providing the biological control agent with specific beneficial carbon sources. D-galactose, D-sorbitol, and D-mannitol were poor carbon sources for Pythium spp. growth but were good for B. cereus D324 growth. Growth in a growth chamber of rice seeds coated with B. cereus D324 amended with specific carbon sources, such as D-galactose and D-sorbitol, showed significantly enhanced seedling emergence compared to seeds coated only with B. cereus D324. Field trials showed that both seedling emergence and yield increased, when the above specific carbon sources were added to B. cereus D324 in seed coating formulations. This result indicated that amending seed coating formulations with specific carbon sources could significantly increase seedling emergence and yield in the field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.144-149
• /
• 1983

Experiments were conducted to develop a pelletization method of minute tobacco seeds for easy handling at seeding by hand or for mechanical seeding. Serpentine, zeolite, and talc were tested as coating materials and the resulting pills were compared in size uniformity, hardness, length of time needed for coating, percentage of pills containing a single seed, and speed of disintegration when submerged in water. Talc was the poorest and zeolite was good only in hardness. On the other hand serpentine was good in most characters above, except for brittleness. This defect, however, was overcome by double coating, first with serpentine and followed by zeolite. This new pelletizing method results in optimum hardness, uniform size, and high ratio of pellets containing one tobacco seed. When compared to bare tobacco seeds, the double-coated seeds did not differ in germination test.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.119-128
• /
• 2017

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods. The required time for seed emergence was for 8~ 9days in the tested direct seeding methods and there was high in seedling establishment according to wet hill-seeding with iron-coated seeds> wet hill-seeding with soil coverage>water seeding with iron-coated seeds and water seeding with pregerminated seeds as the conventional treatment. The rice plant height was taller in wet hill-seeding methods than that of water seeding with broadcasting method but there was not significant difference in terms of statistical analysis at 75day after seeding except the water seeding with pregerminated seeds. The growth of tiller number in the rice plant was highest in water seeding with iron-coated seeds. The milled rice yield was highest in water seeding with iron-coated seed being with 6.4t/ha and percentage of head rice was the highest in wet hill-seeding and water seeding with iron-coated seeds.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.2
• /
• pp.77-86
• /
• 2019

To determine none top soil covering in rice seedling nursery method for the sparse machine transplanting, four different sowing methods were tested. Shoot and root length, fresh weight, leaf number and color using leaf color chart(LCC) and SPAD were collected as the data comparison of methods. The seedling height showed the highest growth according to the conventional (230g seed rate of pre-emerged seeds and top-soil covering) > high sowing density 1 (290g seed rate of pre-emerged seeds and top-soil covering) ≥ high sowing density 2(290g seed rate of pre-emerged seeds and none top-soil covering) > high sowing density 3(290g seed rate of iron-coated seeds and none top-soil covering). There was any statistical difference between groups in root length, leaf number, LCC, and SPAD values. Thus, a high sowing density of 290g for rice nursery seedling box was recommended to the sparse machine transplanting in rice cultivation with the none top-soil covering method, enabling convenient handling in transportation and machine transplanting work.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.3
• /
• pp.5-8
• /
• 2007

All three buffer layers of $Y_2O_3$, YSZ, and $CeO_2$ have been deposited on the biaxially textured metal substrates using rf-sputtering method, The first 50-70nm thick $Y_2O_3$ films were grown epitaxially on biaxially textured metal substrates as a seed layer and followed by the diffusion barrier ${\sim}100nm$ thick YSZ and subsequent capping layer ${\sim}200nm$ thick $CeO_2$ deposited epitaxially on top of $Y_2O_3$ seed layer. The epitaxial orientation of all three layers were all (100) grown with rocking curve Full Width at Half Maximum(FWHM) of $4-5^{\circ}$ and in plane phi-scan FWHM of $6-8^{\circ}$ using X -ray diffraction analysis. The NiO phases formed during the $Y_2O_3$ seed layer deposition seem to degrade the crystallinity and roughen the surface morphology of the following layer observed by AFM(Atomic Force Microscopy). The buffered tapes were used as substrates for long length YBCO coated conductors with high critical current density $J_c$. The five multi-turn of metal tapes was employed to increase the thickness of films and production rate to compensate the low growth rate of rf-sputtering method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.292-296
• /
• 2008

Clay-coated rice seeds (clay-coated seeds A and B) were directly sown on dry paddy and their growth and yield were compared with the normal drill-sown seeds on dry flat paddy. In clay-coated seeds, germination was 1 day earlier and the emergence rate was higher up to 5% than that of normal drill-sown seeds. But the apparent number of seedling stand per $m^2$ was lower than that of normal drill-sown seeds, which is due to the smaller amount of seeding in clay-coated seeds. At the early growth stage, the plant height of clay-coated seeds A was taller than that of drill-sown seeds, while the plant height of clay-coated seeds B was 0.7 cm shorter than that of drill-sown seeds. At the late growth stage, however, the difference was insignificant in both cases. The maximum tillering stage was 10 days earlier in drill-sown seeds. Lodging index was the lowest in clay-coated seeds B and there was no difference between clay-coated seeds A and drill-sown seeds. The ratio of stem base weight, culm diameter and culm wall thickness were higher in clay-coated seeds, while the lower internodes (4th, 5th and 6th) length was shorter in claycoated seeds than in drill-sown seeds. In clay-coated seeds, the number of panicle per $m^2$ was smaller, while the number of spikelet per panicle was a little larger than in drill-sown seeds. The rate of ripened grain and brown rice 1,000 grain weight were lower in the clay-coated seeds, thus the yield was $98{\sim}99%$ level of drill-sown seeds. Considering that the amount of seeding in clay-coated seeds was two-thirds of that in drill-sown seeds, it is expected that clay coating method could become an additional technique for direct seeding cultivation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.18 no.1
• /
• pp.93-100
• /
• 2016

This research was conducted to determine a pre-germinated herbicides with iron-coated seeds in water and wet hill seeded rice. Days of rice seedling emergence was the faster germination at the application of benzobicyclon > oxadiazon > thiobencarb > butachlor and the sealed iron-coated seeds with pre-germinated seeds> pre-germinated seeds> iron-coated seeds with pre-soaking. The seedling establishment was relatively high in untreated control and benzobicyclon among seed treatments by 63.7% and 75.7%. There was 100% seeds killed of pre-germinated seeds in terms of herbicide phytotoxicity and sealed iron-coated seeds with pre-germinated seeds in butachlor but benzobicyclon was of safe with 2% rice seeds killed. Infant rice seedling height was of 9.2-12.9cm in benzobicyclon and 11.9-16.3cm in untreated control and thus there was relatively normal development and growth at the initial rice seedling.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.213-217
• /
• 1999

Seed coating and pelleting techniques have been used in many crops to improve the germination vigor of tiny and light seeds. Cultivated Chinese-foxglove (Rehmannia glutlnosa) has been infected by various types of virus derived from vagetative propagation of rootstock. Seed characteristics and alginate-coated seed germination rate have been investigated to get basic information for healthy seedling production through seed propagation. Chinese-foxglove showed different numbers of seeds per pod from 61 in Seocheon local to 207 in Jiwhang 1 and 1,000grain weight also varied from 70mg of Seocheon local to 130mg of Jiwhang 1. Seeds of Chinese-foxglove has dormancy because that seed collected last year more stimulated than that of this year at germination test. Optimum alginate concentration for pellected seeds germination was 2%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.1-8
• /
• 2017

We investigated the effect of silicate coating of rice seeds on bakanae disease incidence and the quality of seedlings raised in seedling boxes and transplanted into pots. The silicate-coated rice seed (SCS) was prepared as follows. Naturally infested rice seeds not previously subjected to any fungicidal treatment were dressed with a mixture of 25% silicic acid at pH 11 and 300-mesh zeolite powder at a ratio of 50 g dry seed - 9 mL silicic acid - 25 g zeolite powder. The following nursery conditions were provided : Early sowing, dense seeding in a glass house with mulching overnight and no artificial heating, which were the ideal conditions for determining the effect on the seed. The nursery plants were evaluated for Gibberella. fujikuroi infection or to determine the recovery to normal growth of infected nursery plants in the Wagner pot. Seedlings emerged 2-3 days earlier for the SCS than they did for the non-SCS control, while damping-off and bakanae disease incidence were remarkably reduced. Specifically, bakanae disease incidence in the SCS was limited to only 7.8% for 80 days after sowing, as compared to 91.6% of the non-SCS control. For the 45-days-old SCS nursery seedlings, the fresh weight was increased by 11% and was two times heavier, with only mild damage compared to that observed for non-SCS. Even after transplanting, SCS treatment contributed to a lower incidence of further infections and possibly to recovery of the seedlings to normal growth as compared to that observed in symptomatic plants in the pot. The active pathogenic macro-conidia and micro-conidia were considerably lower in the soil, root, and seedling sheath base of the SCS. In particular, the underdeveloped macro-conidia with straight oblong shape without intact septum were isolated in the SCS ; this phenotype is likely to be at a comparative etiological disadvantage when compared to that of typical active macro-conidia, which are slightly sickle-shaped with 3-7 intact septa. A active intact conidia with high inoculum potential were rarely observed in the tissue of the seedlings treated only in the SCS. We propose that promising result was likely achieved via inhibition of the development of intact pathogenic conidia, in concert with the aerobic, acidic conditions induced by the physiochemical characteristics associated with the air porosity of zeolite, alkalinity of silicate and the seed husk as a carbon source. In addition, the resistance of the healthy plants to pathogenic conidia was also important factor.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.131-137
• /
• 1998

A composite copper coated powder was generated by pressure hydrogen stripping copper from Kelex 100 solvent extractant in the presence of silica powder. Within the limitation of solvent extraction under constant conditions, both loading level and stripping rate were reproducible. The stripping copper kinetics are reduced from a divalent state to a metallic state and then deposited on the surface of the silica powder. Copper nucleates heterogeneously on the seed particles. They are giving an agglomerated and non - uniform powder.