• Journal of the Korean institute of surface engineering
• /
• 제32권2호
• /
• pp.100-108
• /
• 1999

The microstructure and corrosion properties of Al-Si diffusion coated PWA1426 alloy have been investigated. Experimental variables are included temperatures of heat-treatment and coating thickness. The microstructure of coated layer and corrosion properties were analysed by SEM, EDS and hot corrosion test. Two major processes have been found to contribute to microstructural changes in the coating. These are, firstly, the transformation of the NiAl to other $Ni_2Al_3$-based phase and secondly, the precipitation of Cr containing phases. Specimens heat treated at $1080^{\circ}C$ showed superior corrosion resistance to heat treated at $880^{\circ}C$. These increase in life was attributed to the transformation of NiAl and increased coating thickness of PWA1426 alloy.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1265-1266
• /
• 2006

Multi-stacked HTS tapes are needed to conduct large current in the power application of superconducting machine. This paper deals with the transport current loss of multi-stacked YBCO coated conductor. YBCO coated conductor that was used in this experiment has two Cu layers above and below of YBCO layer for stabilization. Transport losses of four different stacks, single, 2 stack, 3 stack and 4 stack, were measured. Measured results were compared analytic equation suggested by Norris.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1415-1417
• /
• 2009

High transmittance and low resistance index matched transparent conducting oxide (IMTCO) coated glass was prepared and characterized. IMTCO was deposited by RF magnetron sputtering with the thickness of 15nm and 90nm thick anti-reflection layer was evaporated. To modify surface to hydrophilic, in-situ plasma treatment was also performed. IMTCO coated glass exhibited 96.6% of transmittance in the wavelength range of 400~700nm which is relatively high value compared to commercially available IMTCO glass. The sheet resistance uniformity was measured to be 1.53%.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.120-122
• /
• 2003

BaZrO$_3$and SrTiO$_3$(STO) thin films were Pulsed laser deposited on biaxially textured Ni and Ni-W alloy substrates to be used as single buffer layer for coated conductor. The texture of the films were analysed using the GADDS (general area detector diffraction system). Both films deposited on the metal tape were strongly (001) oriented, and in-plane textured (Δø (BZO) =9$^{\circ}$, Δø (STO) = 10$^{\circ}$).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.55.1-55.1
• /
• 2009

나노 임프린트 리소그래피 기술은 고집적된 나노 구조물을 경제적으로 형성시킬 수 있는 유망한 차세대 리소그래피 기술 중 하나로써 광학 소자 뿐만 아니라 반도체, 디스플레이, 바이오 소자 등 다양한 분야에 적용이 가능하다. 본 연구에서는 태양전지 보호층으로 사용되는 유리 기판의 투과도 향상을 위해 나노 크기의 패턴을 형성하여 표면 반사를 최소화 하였으며, 보호층의 유지보수 부담을 줄이기 위해 패턴 표면에 방오 기능을 갖는 hydrophobic SAM(Self Assembled Mono-layer)을 형성하였다. 또한, SAM coated nano-sized pattern 형성을 위해 사용 된 $SiO_2$ 증착층과 SAM이 투과도에 끼치는 영향을 확인하기 위하여 bare glass, $SiO_2$ deposited glass, SAM coated glass 그리고 SAM/$SiO_2$ coated glass를 제작하였으며, 각각의 투과도를 측정하여 비교 분석 하였다. 투과도를 측정하기 위해 UV-Vis spectrophotometer를 사용하였으며, 방오 기능을 측정하기 위해 접촉각 측정장치를 사용하였다. 접촉각의 측정을 통해 이형처리(SAM coating)를 한 기판 표면이 소수성으로 바뀌어 물이나 먼지가 잘 묻지 않게 되는 것을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1725-1726
• /
• 2006

Multi-stacked HTS tapes are needed to conduct large current in the power application of superconducting machine. This paper deals with the transport current loss of multi-stacked YBCO coated conductor. YBCO coated conductor that was used in this experiment has two Cu layers above and below of YBCO layer for stabilization. Transport losses of four different stacks, single, 2 stack, 3 stack and 4 stack, were measured. Measured results were compared analytic equation suggested by Norris.

• Textile Coloration and Finishing
• /
• 제15권3호
• /
• pp.66-66
• /
• 2003

야외 운동(outdoor activities)복에 사용되는 소재들은 외부로부터 신체를 안전하게 보호해 주어야 될 뿐 아니라 쾌적하게 유지시켜 주어야 한다. 의복착용시 쾌적감에 결정적인 영향을 미치는 인자는 몸의 열적 평형상태를 유지하기 위한 수단인 수분전달 특성이다. 본 연구는 여러 종류의 야외 운동복용 직물에서의 수분전달 현상을 조사하여 규명하므로써 이 직물들이 실제 의복생활에 응용될 의복계 (clothing system)를 형성하였을 때의 수분전달 현상을 설명하고자 하는 기초연구이다. 연구의 결과는 base layer용, mid layer용 직물들이 shell layer로 쓰이는 waterproof breathable 직물보다 수분 전달률이 높았으며, waterproof breathable 직물의 수분 전달률은 microfibre 직물, PTFE-laminated 직물 그리고 polyurethane coated 직물 순 이었다. 또한 polyurethane 직물에서는 back coated 직물이 face-coated 직물보다 수분 전달률이 높았다.

• Textile Coloration and Finishing
• /
• 제15권3호
• /
• pp.192-196
• /
• 2003

야외 운동(outdoor activities)복에 사용되는 소재들은 외부로부터 신체를 안전하게 보호해 주어야 될 뿐 아니라 쾌적하게 유지시켜 주어야 한다. 의복착용시 쾌적감에 결정적인 영향을 미치는 인자는 몸의 열적 평형상태를 유지하기 위한 수단인 수분전달 특성이다. 본 연구는 여러 종류의 야외 운동복용 직물에서의 수분전달 현상을 조사하여 규명하므로써 이 직물들이 실제 의복생활에 응용될 의복계(clothing system)를 형성하였을 때의 수분전달 현상을 설명하고자 하는 기초연구이다. 연구의 결과는 base layer용, mid layer용 직물들이 shell layer로 쓰이는 waterproof breathable 직물보다 수분 전달률이 높았으며, waterproof breathable 직물의 수분 전달률은 microfibre 직물, PTFE-laminated 직물 그리고 polyurethane coated 직물 순 이었다. 또한 polyurethane 직물에서는 back coated 직물이 face-coated 직물보다 수분 전달률이 높았다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.213-213
• /
• 2012

In this study, effect of EB-PVD coated Si/HA film thickness on surface characteristics of Ti-35Nb-10Zr alloy was investigated. The Ti-35Nb-10Zr alloy was fabricated by arc melting method. The Si/HA layers were coated with 0.8 wt.% of Si in pure HA by EB-PVD method. The coating thickness was consisted with 100 - 300 nm for each group, the surface characteristics was analyzed by FE-SEM, EDS, XRD, XRF and corrosion test. The Si/HA coating layer was well deposited on the alloy surface by EB-PVD, the thickness was correlative factor with HA peaks and corrosion resistance value.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.505-508
• /
• 2006

Talc has been used as coating pigments for gravure printing paper and light weight coated paper (LWC) in Europe for 30 years and the use of talc has been significantly increased every year. Currently, talc is used for about 15% of pigments for paper coating. Especially more than 50% of the coating pigments for gravure printing paper and web printing paper (web off-set) is applying talc. The use of talc improves printability, smoothness, and the coverage of base paper, and showed a significant effect on reducing the coated paper basis weight. In addition, it improves compressibility of the coating layer, influencing the gravure printability.