• 농업과학연구
• /
• 제38권3호
• /
• pp.453-458
• /
• 2011

The MC1R (Melanocortin 1 receptor) gene has been known as a causative gene of the coat colors in mammals and responsible for the E (Extension) locus which has three alleles ($E^D$, $E^+$, e) that determines coat colors. The dominant allele $E^D$ produces black or brown colors due to the missense mutation and the recessive e allele has frameshift mutation which shows red or yellow coat colors. Whereas the wild type $E^+$ produces variety of colors due to the interaction with A (Agouti) locus. In this study, PCR-RFLP was performed using two restriction enzymes (BsrF I and MspA1 I) in order to obtain MC1R genotypes in Korean brindle cattle and black cattle. The results showed that all of the animals have the $E^+$ alleles, indicating the $E^+$ allele might related with black coat colors. Later on, the experiments expanded to the 260 Korean candidate bulls whether these animals have the same $E^+$ allele. Among 260 samples investigated, 5% (13/260) of the animals had $E^+$e genotypes, indicating the $E^+$ allele is also present in the candidate bulls in a low frequency. Even though we expected that A locus also affect the black coat color in cattle, all the black coat color animals (brindle and black) have $E^+$ alleles in this study. Therefore, the genotyping of the MC1R gene in candidate bulls will recommended be applied for eliminating of black coat colors in Hanwoo population, if the farmers need to have the brown coat colors only.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.32-37
• /
• 2011

In car refinishing, the paint film characteristics of clear coat play an important role in appearance quality. Thus, Primarily in this research, the variance of brightness with the change of the thickness of paint film is investigated. Besides, as changing the thickness of paint film, the correlation between surface leveling(which is one of appearance characteristics) is investigated in this research. Throughout this investigation, we come to know that the increase of clear coat paint film thickness leads the improvement of appearance characteristics within specific range of thickness. Furthermore, the fact that too thick paint film does not increase the brightness or appearance characteristic any more is known. The optimum thickness of clear coat film for the best and appearance characteristics is derived from this research and more efficient way of determining optimum thickness of paint film is found. Particularly, haze value and waviness have more influence on vividness than brightness. Throughout all experiments, the appearance characteristics are much better at painted horizontally than vertically. These results are derived due to the facts that to obtain the same paint film thickness at painted vertically with painted horizontally is difficult and the way of vertical painting is different from horizontal painting. Therefore, the improvement of vertical painting and horizontal painting are required.

• The Plant Pathology Journal
• /
• 제25권3호
• /
• pp.225-230
• /
• 2009

Lily mottle virus (LMoV) causes flower quality reduction in Lilium spp. The coat protein gene was RT-PCR-amplified from total RNA extracted from infected lily leaves and the amplified fragment was cloned into the pRSET expression vector tagged with a His-MBP. The plasmid of recombinant coat protein was used to transform an Escherichia coli strain pLysS and was expressed. The coat protein was purified by affinity chromatography using a Ni-NTA resin. The identity of the purified protein was confirmed by SDS-PAGE. The in vitro-expressed protein was used for immunization of mice. The polyclonal and monoclonal antibodies reacted specifically for the detection of LMoV in lily extracts in Western blot. Moreover the monoclonal antibodies reacted with lily extracts in DAS-ELISA with no unspecific or heterologous reactions against other non-serologically related viruses, but the polyclonal antibodies revealed a weak reaction against both infected lily and healthy control.

• 분석과학
• /
• 제17권5호
• /
• pp.388-392
• /
• 2004

genomics의 정보해석이나 신경전달물질 또는 약의 전달체계에서 아주 중요한 역할을 담당하는 막단백질의 구조연구는 기존의 X-ray나 용액상 핵자기공명분광법으로 수행하기 어려우나 지방질 이분자층이나 여러분자층에서 움직이지 않게 정렬시킨 단백질시료를 이용하여 특이하게 고안된 home-built solid-state NMR probe를 이용하면 구조를 연구할 수 있다. 이 논문에서는 박테리오파지인 pf1의 growth, 분리, 정제 및 pf1에서의 coat protein의 분리, 정제과정과 최종적으로 분리 정제된 pf1의 coat protein의 인산지방질 이분자층에서의 구조를 고체상 핵자기공명 분광법을 이용하여 연구하고자 한다.

• The Plant Pathology Journal
• /
• 제26권1호
• /
• pp.25-31
• /
• 2010

Papaya ringspot virus (PRSV) causes the most widespread and devastating disease in papaya. Isolates of PRSV originating from different geographical regions in south India were collected and maintained on natural host papaya. The entire coat protein (CP) gene of Papaya ringspot virus-P biotype (PRSV-P) was amplified by RTPCR. The amplicon was inserted into pGEM-T vector, sequenced and sub cloned into a bacterial expression vector pRSET-A using a directional cloning strategy. The PRSV coat protein was over-expressed as a fusion protein in Escherichia coli. SDS-PAGE gel revealed that CP expressed as a ~40 kDa protein. The recombinant coat protein (rCP) fused with 6x His-tag was purified from E.coli using Ni-NTA resin. The antigenicity of the fusion protein was determined by western blot analysis using antibodies raised against purified PRSV. The purified rCP was used as an antigen to produce high titer PRSV specific polyclonal antiserum. The resulting antiserum was used to develop an immunocapture reverse transcription-polymerase chain reaction (IC-RT-PCR) assay and compared its sensitivity levels with ELISA based assays for detection of PRSV isolates. IC-RT-PCR was shown to be the most sensitive test followed by dot-blot immunobinding assay (DBIA) and plate trapped ELISA.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.99-106
• /
• 2010

Gas turbines operation for power generation increased rapidly since 1990 due to the high efficiency in combined cycle, relatively low construction cost and low emission. But the operation and maintenance cost for gas turbine is high because the expensive superalloy hot gas path parts should be repaired and replaced periodically This study analyzed the initiation and propagation of the crack at the gas turbine blades which are coated with MCrAIY as a bond coat and TBC as a top coat. The sample blades had been serviced at the actual gas turbines for power generation. Total 7 sets of blades were analyzed and they have different EOH(equivalent operation hour). Blades were sectioned and the cracking distribution were measured and analyzed utilizing SEM(scanning electron microscope) and optical microscope. The blades which had 52,000 EOH of operation had cracks at the substrate and the maximum depth was 0.2 mm. Most of the cracks initiated at the boundary layer between TBC and bond coat and propagated down to the bond coat. Once bond coat is cracked, the base metal is exposed to the oxidation condition and undergoes notch effect. Under this environment, the crack branched at the inter-diffusion layer and propagated to the substrate. Critical cracks affecting the blade life were analyzed as those on suction side and platform.

• 대한수의학회지
• /
• 제13권1호
• /
• pp.67-73
• /
• 1973

Toxoplasma gondii (Tp), RH strain, was inoculated into cultured buffy coat cells obtained from the swine blood. The main reason for adopting swine lies in the animal's unusual susceptibility to Tp, As for the culture method used in the experiment, those well proved methods practised by Cho, Merchant, Moore and Tarnvik were mainly referred to as a starting point: hence, the author's method has been turned out to be the modified or supplementary form of those methods. Observations were made on the phase of multiplication of Tp in the cytoplasm. The results obtained were as follows: 1. Better growth and multiplication of Toxoplasma gondii were noticeably observed in the swine buffy coat cell, inoculated after three-to-five day cultivation of the cell. 2. In the lapse of the observation period, there appeard Toxoplasma gondii rarely available in the earlier stage, which had been inoculated into the cell after three-to-five day cultivation. In other words, Toxoplasma gondii started to show itself in seven or eight hours after inoculation, most outstandingly noticeable between twenty four hours and forty eight hours. Thereafter the disintegration stage of Toxoplasma gondii was observed.

• 식물분류학회지
• /
• 제41권2호
• /
• pp.103-107
• /
• 2011

가지과 Withania somnifera (L.) Dunal의 종자 해부학적 특징을 알기 위하여 광학현미경과 주사전자 현미경을 사용하여 관찰하였다. 종자의 색깔은 노랑색이고, 종자의 형태는 신장형이며, 크기가 2−3 mm 정도이다. 종자는 종의를 가지고 있지 않았으며, 배유가 잘 발달한 유배유종자였다. 종피형태는 외종피외층형으로 나타났다. 종피는 외종피만으로 구성되는 단주피성 이었으며, 한 층의 외종피외층, 여러 층의 외종피중층, 그리고 한 층의 외종피내층으로 구성되었다. 그러나 종자가 완전히 성숙했을 때는 외종피중층이 모두 압착되었으며, 외종피외층은 특징적으로 파상형의 후벽세포로 발달하였다. 종피의 표면은 망상구조를 가지며, 수층 벽구조는 파상형으로 발달하였고, 표면에 여러 개의 구멍이 발달하는 특징이 관찰되었다.

• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.161-172
• /
• 2015

In this study, characteristics of modern fur fashion were reviewed and aesthetic characteristics shown in fur fashion were analyzed. The results of this study are as follow. Aesthetic characteristics shown in fur fashion between 1980s and 2000s are conspicuousness, sensuality, elegance, activity, humor and abnormality. Conspicuousness was displayed in oversized fur coat in vivid leopard pattern, mink coat trimmed with rich fox fur or leopard patterned fur jacket in hot pink. Sensuality was displayed in white and gray soft mink coat worn over mini dress, soft mink jacket which is short enough to expose legs or soft fox best accentuating chest and arms. Elegance was displayed in soft fox coat in silver, luxurious mink coat with slim silhouette that flows with body line or silver bolero made of mink and silk with slim silhouette. Activity was presented in mink pullover with loose silhouette or rabbit jacket that emphasized functionality by having zippers or hem made of rubber. Humor was presented in unique and humorous patterned fur jacket or exaggerated and unique form of fox bolero. Abnormality was presented in mink jacket made of combining alien material with deformed proportion and form or outer that emphasized vague form by using long and big fox fur.

• 한국세라믹학회지
• /
• 제40권3호
• /
• pp.255-261
• /
• 2003

생체활성 유리를 알루미나 기판에 코팅하고 이를 유사 생체 용액에 반응시켰을 때 코팅 유리층 표면에 생성된 수산화 아파타이트 형성 거동 변화에 대하여 연구하였다. 알루미나에 코팅된 생체 활성 유리를 여러 온도에서 열처리하였을 때 다양한 종류의 결정상이 나타났으며, 특히 110$0^{\circ}C$에서 열처리하였을 때는 $\beta$-wollastonite와 apatite, 120$0^{\circ}C$에서 열처리하였을 때는 $\alpha$-wollastonite와 apatite가 생성되었다. 이들 시편을 tris-완충용액에 반응시켰을 때, $\alpha$-wollastonite 결정의 부식 속도가 $\beta$-wollastonite의 부식 속도보다 빨랐다. 그리고 이들 시편을 유사 생체 용액과 반응시켰을 때는 두 코팅층 표면에서 수산화 아파타이트가 형성되었는데, 그 형성 속도는 $\alpha$-wollastonite가 포함된 시편에서 더 빨랐다.