• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.25-28
• /
• 2007

Precise digital elevation model (DEM) is an important issue in coastal area where DEMs in a time series are especially required. Although LIDAR system is useful in coastal regions, it is not yet popular in Korea mainly because of its high surveying cost and national security reasons. Recently, precise coastal DEM have been made using radar interferometry, waterline method. One of these methods, Spaceborne imaging radar interferometry has been widely used to measure the topography and deformation of the Earth. We acquired ALOS PALSAR FBD mode (Fine Beam Dual) data for evaluating the quality of interferograms and their coherency. The purpose of this study is construction of DEM using the ALOS PALSAR data using radar interferometry and analysis of surface characteristics by coherence and magnitude map over the Ganghwado and Siwha tidal flats and near coastal lands.

• Korean Journal of Remote Sensing
• /
• v.17 no.2
• /
• pp.121-129
• /
• 2001

A DEM(digital elevation model) is generated from a SPOT panchromatic stereo-pair using automated algorithms over a 8 km$\times$10 km region around Mokpo city. The aims are to continue the accuracy assessment over diverse conditions and to examine the applicability of a SPOT DEM for coastal disaster monitoring. The accuracy is assessed with respect to three reference data sets: 10 global positioning system records, 19 leveling data, and 1:50,000 topography map. The planimetric error is 10.6m r.m.s. and the elevation erroer ranges from 12.4m to 14.4m r.m.s.. The DEM accuracy of the flat Mokpo region is consistent with that over a mountainous area, which supports the robustness of the algorithms. It was found that coordinate transformation errors are significant at a few meters when using the data from leveling and topographic maps. The error budget is greater than the requirements for coastal disaster monitoring. Exploiting that a sub-scene is used, the affine transformation improves the accuracy by 50% during the camera modeling.

• Korean Journal of Remote Sensing
• /
• v.20 no.3
• /
• pp.163-173
• /
• 2004

The objective of this study is to develop a method to generate micro-relief digital elevation model (DEM) data of the tidal mudflats using multi-temporal Landsat Thematic Mapper (TM) data. Field spectroscopy measurements showed that reflectance of the exposed mudflat, shallow turbid water, and normal coastal water varied by TM band wavelength. Two sets of DEM data of the inter-tidal mudflat area were generated by interpolating several waterlines extracted from multi-temporal TM data acquired at different sea levels. The waterline appearing in the near-infrared band was different from the one in the middle-infrared band. It was found that the waterline in TM band 4 image was the boundary between the shallow turbid water and normal coastal water and used as a second contour line having 50cm water depth in the study area. DEM data generated by using both TM bands 4 and 5 rendered more detailed topographic relief as compared to the one made by using TM band 5 alone.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.52-63
• /
• 2021

In previous research, the coastal wetlands were detected by using the vegetation indices or land cover classification maps derived from the multispectral bands of the satellite or aerial imagery, and this approach caused the various limitations for detecting the coastal wetlands with high accuracy due to the difficulty of acquiring both land cover and topographic information by using the single remote sensing data. This research suggested the efficient methodology for detecting the coastal wetlands using the sentinel-2 satellite image and SRTM(Shuttle Radar Topography Mission) DEM (Digital Elevation Model) acquired in Gomsoman Bay, west coasts of South Korea through the following steps. First, the NDWI(Normalized Difference Water Index) image was generated using the green and near-infrared bands of the given Sentinel-2 satellite image. Then, the binary image that separating lands and waters was generated from the NDWI image based on the pixel intensity value 0.2 as the threshold and the other binary image that separating the upper sea level areas and the under sea level areas was generated from the SRTM DEM based on the pixel intensity value 0 as the threshold. Finally, the coastal wetland map was generated by overlaying analysis of these binary images. The generated coastal wetland map had the 94% overall accuracy. In addition, the other types of wetlands such as inland wetlands or mountain wetlands were not detected in the generated coastal wetland map, which means that the generated coastal wetland map can be used for the coastal wetland management tasks.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.34-43
• /
• 2018

DEM(Digital Elevation Model) being fundamental data in geospatial domain is produced from different data and using various methods. As they are derived their precision varies and altering derivative in application. In this work, we compare two widely used DEMs namely(Advanced Land Observing Satellite World 3D 30m and Shuttle Radar Topography Mission Global 30m) around coastal islands in Gyeongsangnam-do, South Korea. First statistics of each DEM were calculated and later overlapped in Landsat image for visual comparison of areas below and above zero-meter elevation. As a result, it was found that DEMs were highly correlated with each other and had similar statistics. Besides having few high differences in hilly land area, they were able to represent the coastal lines. It has also been noted that they have many negative values and should carefully select study area covering full watershed in coastal regions to avoid negative elevation even after filling the sinks.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.559-566
• /
• 2007

The generation of precise digital elevation model (DEM) is very important in coastal area where time series are especially required. Although a LIDAR system is useful in coastal regions, it is not yet popular in Korea mainly because of its high surveying cost and national security reasons. Recently, precise DEM has been made using radar interferometry and waterline methods. One of these methods, spaceborne imaging radar interferometry has been widely used to measure the topography and deformation of the Earth. We acquired ALOS PALSAR FBD mode (Fine Beam Dual) data for evaluating the quality of interferograms and their coherency. We attempted to construct DEM using ALOS PALSAR pairs - One pair is 2007/05/22 and 2007/08/22, another pair is 2007/08/22 and 2007/10/22 with respective perpendicular baseline of 820 m, 312m and respective height sensitivity of 75 m and 185m at southern of Ganghwa tidal flat, Siwha- and Hwaong-lake over west coastal of Korea peninsula. Ganghwa tidal flat has low coherence between 0.3 and 0.5 of 2007/05/22 and 2007/08/22 pair. However, Siwha-lake and Hwaong-lake areas have a higher coherence value (From 0.7 and 0.9) than Ganghwa tidal area. The reason of difference coherence value is tidal condition between tidal flat area (Ganghwa) and reclaimed zone (Siwha-lake and Hwaong-lake). Therefore, DEM was constructed by ALOS PALSAR pair over Siwha-lake and Hwaong-lake. If the temporal baseline is enough short to maintain the coherent phases and height sensitivity is enough small, we will be able to successfully construct a precise DEM over coastal area. From now on, more ALOS PALSAR data will be needed to construct precise DEM of West Coast of Korea peninsular.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.170-181
• /
• 2015

A research on extracting croplands located nearby coastal areas using the spatial information data sets is the important task for managing the agricultural products in coastal areas. This research aims to extract the various croplands(croplands on mountains and croplands on plain areas) located nearby coastal areas using the KOMPSAT-2 imagery, the high-resolution satellite imagery, and the airborne topographic LiDAR(Light Detection And Ranging) data acquired in coastal areas of Uljin, Korea. Firstly, the NDVI(Normalized Difference Vegetation Index) imagery is generated from the KOMPSAT-2 imagery, and the vegetation areas are extracted from the NDVI imagery by using the appropriate threshold. Then, the DSM(Digital Surface Model) and DEM(Digital Elevation Model) are generated from the LiDAR data by using interpolation method, and the CHM(Canopy Height Model) is generated using the differences of the pixel values of the DSM and DEM. Then the plain areas are extracted from the CHM by using the appropriate threshold. The low slope areas are also extracted from the slope map generated using the pixel values of the DEM. Finally, the areas of intersection of the vegetation areas, the plain areas and the low slope areas are extracted with the areas higher than the threshold and they are defined as the croplands located nearby coastal areas. The statistical results show that 85% of the croplands on plain areas and 15% of the croplands on mountains located nearby coastal areas are extracted by using the proposed methodology.

• Journal of the Korean association of regional geographers
• /
• v.9 no.2
• /
• pp.203-216
• /
• 2003

The process of constructing coastal digital elevation model(DEM), for the 3 dimensional analysis, is composed by abstracting land layers for land elevation and water depth, reprojecting UTM, relocating geographical grid, and interpolating works. The geomorphic set of shallow sea, including tidal current, tidal zone deposition, and water depth distribution, was analyzed by eye search of Landsat TM image, masking of land zone, band combination and regression analysis. Some horizontal differences, between combined DEM and surveyed data of shallow sea, was corrected for analysis. Analyzed geomorphic elements are stream channel, alluvial fan, coastal terrace, tidal current. and shallow sea bank. Results of analysis present that transported fluvial materials influence tidal sedimentation, especially from Gahwacheon river, for the role of artificial draining flooding waters from Jinyang Reservoir, almost in the summer season. In the coastal area with less tidal current, more fine materials are deposited. The influence of currental deposition are higher on small pockets with west coast of well developed terraces. The lower skirt of alluvial fans developed into the tidal zone of shallow sea. Small pocket type bays are closed by coastal current, and less influenced from tidal deposition. The bank of Jinju Bay are developed originally from submerging of remnant erosional mountain ranges, and play on the role of trapping fine materials.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.297-300
• /
• 2008

High-resolution mesoscale meteorological modeling requires more accurate and higher resolution digital elevation model (DEM) data. Shuttle Radar Topographic Mission (SRTM) has created 90 m DEM for entire globe and that is freely available for meteorological modeling and environmental applications. In this research, the effects of the topographic interpolation methods on high-resolution wind field simulation in the coastal regions were quantitatively analyzed using Weather Research and Forecasting (WRF) model with SRTM data. Sensitivity experiments with three different interpolation schemes (four-point bilinear, sixteen-point overlapping parabolic and nearest neighbor interpolation methods) were preformed using SRTM. In WRF modeling with sixteen-point overlapping parabolic interpolation, the coastal line and some small islands show more clearly than other cases. The maximum height of inland is around 140 meters higher, while the minimum of sea height is about 80 meter lower. As it concerns the results of each scheme it seems that the sixteen-point overlapping parabolic scheme indicates the well agreement with observed surface wind data. Consequently, topographic changes due to interpolation methods can lead to the significant influence on mesoscale wind field simulation of WRF modeling.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.657-672
• /
• 2016

Coastal erosion happens frequently in many different types. To control coastal erosion zone effectively and establish response plans, we need to accumulate data indicating topography changes through monitoring the erosion situation continuously. UAV photogrammetric systems, which can fly autonomously at a low altitude, are recommended as an economical and precision means to monitor the coastal zones. In this study, we aim to verify the accuracy of the generated orthoimages and DEM as a result of processing the UAV data of a coastal zone by comparing them with various reference data. We established a verification routine and examined the possibilities of applying the UAV photogrammetric systems to monitoring coastal erosion by checking the analyzed accuracy by the routine. As a result of verifying the generated the geospatial information from acquired data under various configurations, the horizontal and vertical accuracy (RMSE) were about 2.7 cm and 4.8 cm respectively, which satisfied 5 cm, the accuracy required for coastal erosion monitoring.